Producer's PRIDE PP CHATEAU CHICKEN COOP User manual

Tools required for assembly (not included)Distributed by: TRACTOR SUPPLY COMPANY5401 VIRGINIA WAY, BRENTWOOD, TN 37027For customer support, call: 1-888-376-9601www.TractorSupply.comMADE IN CHINA
SKU# 2015286
PP CHATEAU CHICKEN COOP
ASSEMBLY MANUAL

2
PARTS LIST
2
Part#DescriptionDrawingQty.
1345678910111213111111121421116
Post 1
Post 2Post 3Post 4Coop Back Frame - BottomCoop Back Panel - TopCoop Right PanelCoop Left PanelCoop Bottom FloorCoop Front Panel - Bottom
211
Post 5Post 6Post 7
12
Coop Bottom Mesh-BackCoop Bottom Mesh-Side
115
PVC Board
171
Nesting Box Right Panel

3
Part#DescriptionDrawingQty.
19
202122232425262728293141
18
1303132111111122
PARTS LIST
Nesting Box FloorNesting Box DividerNesting Box RoofPen Mesh PanelPen Front Right PanelPen Front Left PanelPen Door PanelPen Top Triangle PanelRight Shoulder Brace 1Left Shoulder Brace 1Right Shouder Brace 2Left Shoulder Brace 2Roof Support 1Roof Support 2
332
Roof Support 3
11
Nesting Box Left PanelNesting Box Back Panel
34
35
3637111
Roof Ridge 1Roof Ridge 2Roof Ridge 3

4
Part#DescriptionDrawingQty.
3839404142434647134814950515224253
M6x30 Bolt
66+14
M6 Nut
66+136+2326444
Roosting Bar
451
Sliding Door HelperSelf-tapping screw 4x60Self-tapping screw 4x30
PARTS LIST
Roof Ridge 4Roof PanelRoof Ridge Metal CoverRampRoof Support Connector 1Roof Support Connector 2Shoulder Brace ConnectorRoof Support Connector 3
548
Self-tapping screw 4x50
4
Self-tapping screw 4x40M4x20 Bolt
1
Self-tapping screw 4x19
92+3555652+3
Self-tapping screw 3.5x20Coop Door Lock
1
Panel Door Latch
15758591
T-handle Lock with Longer tongueT-handle Lock with short tongue
601

ASSEMBLYStep 1 5Step 2 ●●81489924348
Note: Please pay attention to the post direction, and also make sure all the panels are in same level.
504850105454Note:Make sure #10 sits on #8 without any gap in between. Attach Coop Bottom Mesh-Back (#8) and 2pcs Coop Bottom Mesh-Side (#9),between the 4Posts (#1, #2, #3, & #4) by M6x30 Bolt (#48) and M6 Nut (#50).Assemble the Coop Back Frame-Bottom (#10) with 4pcs Self-tapping Screw 4x30 (#54).

ASSEMBLYStep 3 6
●
●1154545454
Noted: Make sure the bottom of #47 is aligned with the square wood frame of #11.
Step 4 ●
Assemble 1pc #11 board on top of #10 frame with 4pcs -tapping Screw 4x30 (#54).Self
Assemble Coop Right Panel (#12) between Posts #1 and #3 by 6pcs Self Screw 4x30 (#54). -tapping
54121147554755Take 2pcs Coop Back Panel - Top (#11) and 4pcs of Roof Support Connector 3 (#47). Fix 1pc ofRoof Support Connector 3 (#47) on each side of the Peak position of Coop Back Panel - Top (#11)by Self-tapping Screw 3.5x20 (#55).

ASSEMBLYStep 5 ●Step 6 7●13541415Same as Step 4, assemble Coop Left Panel (#13) between Posts #2 and #4 by 6pcs Self-tappingScrew 4x30 (#54). Put Coop Bottom Floor (#14) on top of the two bottom bars of Panels #12 and #13. Then put thePVC Board (#15) on top of #14.

ASSEMBLY●Step 8 8●16Step 7 541154Assemble Coop Front Panel - Bottom (#16) by 4pcs -tapping Screw 4x30 (#54) from inside ofSelfthe coop.Fix the 2nd Coop Back Panel - Top (#11) board on top of board #16.

ASSEMBLYStep 9 ●Step 10 9●42Put the 4pcs Roosting Bar (#42) between the 8 blocks as below.1718 52Assemble Nesting Box Right Panel (#17) and Nesting Box Left Panel (#18) to the two sides of CoopBack Frame (#10) with Self Screw 4x50 (#52).-tapping

ASSEMBLYStep 11 ●Step 12 10●20Slide the Nesting Box Floor (#20) into the two U-channels on the bottom of Nesting Box Right Panel (#17) and Nesting Box Left Panel (#18). Push the floor all the way inside.1952Assemble the Nesting Box Back Panel (#19) with 4pcs Self screw 4x50 (#52).-tapping

ASSEMBLYStep 13 ●Step 14 11●21Insert the 3pcs Nesting Box Divider (#21) into the Nesting Box Floor (#20).2253Attach the Nesting Box Roof (#22) by Self screw 4x40 (#53).-tapping53

ASSEMBLYStep 15 ●Step 1612●23Fix the 2pcs Pen Mesh Panel (#23) on Posts #3 and #4 , each panel with 4pcs M6x30 Bolt (#48) and23485046414948&50Fix the Sliding Door Helper (#46) with M4x20 Bolt (#49) and the Ramp (#41) with M6x30 Bolt (#48)4pcs M6 Nut (#50).and M6 Nut (#50).

ASSEMBLYStep 17●Step 18 13●235567Following below diagram, fix 2pcs Post 5 (#5) , 2pcs Pen Mesh Panel (#23) and Post 6 (#6), Post 7 (#7) in turn. Requires totally 24pcs M6x30 Bolt (#48) and 24pcs M6 Nut (#50)23242548&50
Now fix the Pen Front Right Panel (#24) on Post 6 (#6), and the Pen Front Left Panel (#25) on Post 7 (#7),
each by 4pcs M6x30 Bolt (#48) and 4pcs M6 Nut (#50).

ASSEMBLYStep 19 ●Step 2014●2648&5048&502748&5048The flange for the door frameneeds to be at the top.Assemble the Pen Door Panel (#26) between above two side panels, by 4pcs M6x30 Bolt (#48) and 4pcs M6 Nut (#50) on each side.Put the Pen Top Triangle Panel (#27) on top of the Door Panel (#26), fix by M6x30 Bolt (#48) andM6 Nut (#50).

ASSEMBLYStep 21 ●Step 2215●312945
51
From the top end of Post 7 (#7) and Post 5 (#5) assemble the Left Shoulder Brace 1 (#29) by Self-tapping29754284530
Screw 4x60 (#51). Then continue to assemble Left Shoulder Brace 2 (#31) on top of Post 2 (#2) andPost 4 (#4) by Self-tapping Screw 4x60 (#51). Make sure the two braces (#29 & #31) in same line,and no gap. Then use the Shoulder Brace Connector (#45) connect the two braces together by Self-tapping Screw 4x30 (#54).
Same as Step 21, assemble the Right Shoulder 1 (#28), the Right Shoulder Brace 2 (#30) on topof the other 4 posts (#1, #3, #5, #6). And connect the 2 braces together with Shoulder BraceConnector (#45).

ASSEMBLYStep 23 ●Step 24 16●323233333434444355444455434455(1)(2)(3)323334
Assemble above 3 sets of roof support combination by Self-tapping Screw 4x60 (#51).
51
Take 2pcs Roof Support 1 (#32), 1pc Roof Support Connector 1 (#43), 1pc Roof Support Connector2 (#44),follow below diagram (1) assemble them together by Self-tapping Screw 3.5x20 (#55).Take 2pcs Roof Support 2 (#33), 2pcs Roof Support Connector 2 (#44), follow below diagram (2)assemble them together by Self-tapping Screw 3.5x20 (#55).Take 2pcs Roof Support 3 (#34), 1pc Roof Support Connector 1 (#43), 1pc Roof Support Connector2 (#44),follow below right diagram (3) assemble them together by Self-tapping Screw 3.5x20 (#55).

ASSEMBLYStep 25 ●Step 26 17●35363738
55
39393956
Put Roof Ridge 1 (#35), Roof Ridge 2 (#36), Roof Ridge 3 (#37), Roof Ridge 4 (#38) in belowdiagram position. Fix them on to Roof Support Connector 1 (#43), Roof Support Connector 2(#44), and Roof Support Connector 3 (#47),by Self-tapping Screw 3.5x20 (#55).Put the 6pcs Roof Panel (#39) evenly spaced on two sides of the roof, and fix them on the RoofSupports by Self-tapping Screw 4x19 (#56).

ASSEMBLYStep 27 ●18Step 28 ●40404056Put the 3pcs Roof Ridge Metal Cover (#40) on the peak of the roof, fix by Self-tapping Screw 4x19 (#56).555557Assemble 1pc Lock (#57) on the Coop Left Panel (#10) as below diagram, using Self-tappingScrew 3.5x20 (#55).

ASSEMBLYStep 29 ●19Step 30 ●
1/4"
T-HandleTongueM10 NutWasherAssemble 1pc Door Latch (#58) on the Pen Door Panel (#26), using M6x30 Bolt (#48) and M6Nut (#50).48&50265858
Follow below door lock assembly instruction assemble T-Handle Lock (#59, with longer tongue) onCoop Door (#10), and T-Handle Lock (#60, with short tongue) on Nesting Box Back Panel (#19).
5960
1/4"
WasherT-HandleM10 NutTongueM10 LocknutM10 Locknut

ASSEMBLYT-Handle Lock Assembly: 20Now the assembly is finished.FrontCloseOpen●●BackCloseOpen
Insert T-handle shaft into the pre-drilled hole on the wood panel, leaving 1/4"space outside. Thenfrom the back of the panel, tighten the M10 nut (not the Locknut) first, then put the tongue in, make sure the tongue is in the same direction of the T-handle, fix the washer and M10 Locknut and tighten them.When using the lock, please remember that you need to push in the 1/4" gap first before you turnthe T-handle. Clockwise is close, counter clockwise is open.