PROJECT E BEAUTY PE730 User manual

Project E Beauty LED Light
Therapy Mask
(Model No. PE730)
www.projectebeauty.com
User Manual
R2175
Version 21719a
Date: 7/23/2021

Before using the device for the rst time, read this User Manual.
1. Indications for Use
2. Recommendation of Use
2.1 Contraindications
2.2 Warnings
2.3 Precautions
3. Product Description
3.1 Components of the device
3.2 Project E Beauty LED Light Therapy Mask Package lists
3.3 The function of the device
3.4 Eye Safety
3.5 Specication
4. Using Instructions
4.1 Check for these situations
4.2 First use and preparation
4.3 Light sensitivity test
4.4 Working mode selection
4.5 Instructions for use
4.6 The treatment time
5. Maintenance
5.1 Cleaning
5.2 Storage
5.3 Disposal
5.4 Troubleshooting
5.5 Warranty
6. Electromagnetic compatibility
7. Labeling
2
2
2
3
4
5
5-6
7
7
8
8
9
9
9
10
11
12-13
13
14
14
14
15
16
17
18
24
--------------------------------------------------------------
-----------------------------------------------------
----------------------------------------------------------
---------------------------------------------------------------------
------------------------------------------------------------------
------------------------------------------------------------
----------------------------------------------
---------
----------------------------------------------
--------------------------------------------------------------------
----------------------------------------------------------------
--------------------------------------------------------------
-----------------------------------------------
------------------------------------------------
-------------------------------------------------------
-------------------------------------------------
--------------------------------------------------------
--------------------------------------------------------
---------------------------------------------------------------------
----------------------------------------------------------------------
-----------------------------------------------------------------------
-----------------------------------------------------------------------
------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------
---------------------------------------------------------------------------
Table of contents
1

2
1. Indications for Use
The Project E Beauty LED Light Therapy Mask is an over the counter
device that is indicated for the treatment of full face wrinkles and mild to
moderate acne.
2. Recommendation of Use
Please read the complete instruction manual before using the Project E
Beauty LED Light Therapy Mask (Model: PE730). It will give you a better
understanding of the device, and you’ll enjoy it.
2.1 Contraindications
1) Do not use if your skin is especially sensitive to light, such as systemic
lupus erythematosus porphyria, polymorphic light eruption, and solar
urticaria.
2) Do not use if you have a history of light triggered seizures, especially if
you have photosensitive epilepsy, as the pattern of bright light could
induce seizures.
3) Do not use if you are undergoing radiation or chemotherapy
treatments.
4) Do not use if you have skin disorders such as rosacea, pustular acne or
abraded skin.
5) Do not use on abnormal skin conditions caused by diabetes or other
systemic, immunological or metabolic diseases.
6) Do not use if your facial skin has been treated with a
physician-prescribed drug within the past 6 months, please consult with
your physician before use.
7) Do not use if you take medications that increase your sensitivity to
sunlight, such as certain antibiotics (phenothiazine, thiazide, diuretics,
sulfonyluraes, sulfonamides, DTIC, uorouracil, vinblastine, griseofulvin),
anti-in ammatories (NSAIDS), Alpha-Hydroxy Acids(AHAs), Beta-Hydroxy
Acids (BHAs), Retin-A, Accutane, topical retinoids, Azelaic acid or the
herbal supplement St. John's Wort.

2.2 Warnings
1) This device emits visible red light, blue light and invisble infrared light
which can cause damage to the eyes. Do not aim the device directly at
your eyes.
2) Do not use the device to treat skin which is painful to touch, raised
(higher than surrounding skin) , open wounds or active infections, such
as sores. crusting or bleeding. This may be a sign of a more serious
condition and should be checked by your doctor.
3) Do Not place in, or drop into water or any other liquid. 4) Do Not use
the device if it becomes damp or wet.
5) Do Not attempt to open or repair your device.
6) DO Not use the device when it is charging.
7) Do Not operate the device if it has a damaged.
8) Use the device only for its intended use and as described in its
manual.
9) Do not use this device if you are currently undergoing or underwent
in the last 2 months, skin related procedures, cosmetic surgery or
procedures for hair loss. Please only use it after consultation with a
specialist.
10) Do not use if you have experienced a migraine in the last two years.
11) Mode 2 of device is only for treatment of mild or moderate acne on
the face.
3

2.3 Precautions
1) Do not use the device on skin that is infected, burned or cut as this
could cause discomfort or irritation.
2) Do not use if you are pregnant. The Applicator has not been tested for
safety on pregnant women and the risks are unknown.
3) Do not use while walking or driving.
4) Keep the device out of reach of children.
5) The device to be used only for treatment of the face. Do not use on
other parts of the body.
6) If you feel di culty breathing, stop using the device immediately and
consult with your doctor.
7) Do not allow the device to touch any metallic objects during use or
while charging.
8) Discontinue use if you encounter any discomfort or skin redness that
lasts for more than two hours. You may have sensitivity to light or
another condition. Consult your health care provider.
9) Keep away from ammable aerosol products.
10) This device is for use by one person during the product’s lifetime and
by persons 22 years of age or older.
4

3. Product Description
The Project E Beauty LED Light Therapy Mask is a facemask-shaped
device designed for home-use, which uses Light Emitting Diodes to emit
energy in the red, blue and infrared region of the spectrum. The Project
E Beauty LED Light Therapy Mask has a total of 36 LEDs. The red light
with wavelengths centered at 635-644nm and the infrared light with
wavelengths centered at 845-855nm to treat wrinkles on the face. The
blue light with wavelengths centered at 430-445nm and the red light
with wavelengths centered at 635-644nm to treat mild to moderate
acne on the face.
The Project E Beauty LED Light Therapy Mask components include the
LED module, USB power cord, and integrated module. The user wears
the device over the face, like a pair of glasses, and presses the Power
button on the integrated module for 1 seconds to initiate the treatment.
The device has a continuous working time of 12 minutes and power o
automatically.
3.1 Components of the device:
A) Viewing Slot
B) Eye Shield
C) Nose Piece
D) Over-Ear Arms
E) LED module
F) Power button
G) Charging Indicator Light
H) USB Charging port
I) USB power cord
Note: The USB Charging port is only used for charging.
5

6
3.1 Components of the device:
A
C
D
E
B
F
G
H
I

3.2 Project E Beauty LED Light Therapy Mask Package lists:
- Main device“Project E Beauty LED Light Therapy Mask”
- USB power cord
- User manual
3.3 The function of the device
Power ON/OFF:
Press the Power button (F) for 1 seconds to power on the device, you will
see that the LED module (E) emits red lights.
Press the Power button (F) for seconds again to power o the device.
Treatment Mode:
The device has two treatment modes:
Mode 1: the device emits Red and Infrared lights to treat wrinkles on the
face.
Mode 2: the device emits Blue and Red lights to treat mild to moderate
acne on the face.
After the device is powered on, you can short press the Power button (F)
to switch treatment mode between“Mode 1” and “Mode 2”.
LED module:
Light source is delivered to the skin through the LEDs. The device has a
total of 36 LEDs.
When the device is working in Mode 1, 30 LEDs emit red lights, and 6
LEDs emit infrared lights.
When the device is working in Mode 2, 30 LEDs emit blue lights, and 6
LEDs emit red lights.
Charging:
The device can be recharged. Use the USB power cord to charge the
device when the battery has low charge. Please refer to Section 4.2 for
steps regarding how to recharge the battery.
7

3.4 Eye Safety:
Do not position the device so that light is
directed from in front of the eyes. Do not look
directly into the LEDs. Also do not shine the
light source directly into the eyes of others.
3.5 Specication
Power supply
Anatomical sites
Weight
Dimension
Number of LED
Design Principle
Wavelength
Therapeutic temperature range
Storage condition
Lithium ion battery
Max. Charging time
Service Life
Risk Group
DC5V 1A
Entire Face
140g
152x176x186.5mm
36LEDs
LED Therapy
Red Light: 635-644nm
Blue Light: 430nm-445nm
Infrared: 845nm-855nm
Operating condition
35°C/ 95°F
Temperature: -25°C to 45°C/ -13°F to
113°F Relative humidity: ≤ 75%
Atmospheric pressure: 700-1060hPa
Temperature: 5°C to 40°C/ 41°F to 104°F
Relative humidity: 15%-75%
Atmospheric pressure: 700-1060hPa
3.7V d.c. 1300mAh
2 hours
5 Years
Risk group 2 according to IEC 62471:2006
8

4. Using Instructions
4.1 Check for these situations
Check whether the device is damaged before each use: Always Inspect
your the device before each use. Look for cracks in the plastic, cuts, frays
or exposed wires in the USB power cord. If it has a damaged USB power
cord, if the device is cracked, if it is not working properly or if it appears
damaged in any way. DO NOT use the device. Please contact us.
4.2 First use and preparation
1) Remove the device and USB power cord from box.
2) Before using the device for the rst time, fully charge the battery. This
may take up to 2 hours.
3) To charge the device, insert on end of the USB power cord into the
USB Charging port on the device and the other end into a standard 5V
USB port.
(Refer to below Figure 1).
Note:
* The device can not be used while charging.
* The USB Charging port is only used for charging.
Power Button
Charging Indicator Light
Micro USB charging port
Standard 5V
USB Port
Figure 1
9

Battery status indicator:
4.3 Light sensitivity test
In order to determine if you have a Light Sensitivity Issue please follow
the instructions below. It is recommended that you test a small, less
sensitive area of skin (i.e., like your forearm).
1. Press the“Power”button to turn on the mask.
2. Place the device on an area of the forearm. Leave in contact with your
skin for a 3-minute treatment cycle.
3. Repeat by doing another 3-minute treatment on the same area of your
arm.
4. Wait 24 hours. You should NOT experience any adverse reaction during
the next 24 hours.
A bad reaction to light occurs if you have pain or discomfort in the
treatment areas or any skin redness for more than two hours. It can be
due to medication, supplements, or a possible skin issue. Please stop
using the device immediately and consult with your doctor if you
experience a bad reaction.
Indicator Light Name
LED Module E
Charging Indicator
Light (E)
Indicator
Light Color
Blue
Blue
Green
Indicator Light
Condition
Blinking
Constant
Constant
Meaning
Low battery
Battery is charging
Battery is fully
charged
10

4.4 Working mode selection
Mode 1: The Mode 1 of the device is suitable for people who have
wrinkles on the face, like the picture below.
Mode 2: The Mode 2 of the device is suitable for people who have mild
to moderate acne on the face.
Use this chart to help determine if the Mode 2 is right for you.
Wrinkles
Clear skin
Mild acne
Severe acne
Note: Mode 2 of the device is only for treatment of mild or moderate acne on the face.
Moderate acne
No
Yes
No
This product is NOT
recommended for
severe acne as the
benets have not been
established.
Yes
No acne
One or more pimples
and redness in small
area
Widespread redness
with many pimples and
pustules.
It may have hard
bumps under the skin.
More pimples and
more redness over a
wider area
Acne type Should you use? Description Example
11

4.5 Instructions for use
Follow these steps to ensure proper operation during a treatment:
Clean the device surface with a soft
wet cloth. Make sure your face is clean,
dry and wiped free of any oil or
cosmetics before using the device.
1
Wear the device as wearing eye glasses
and adjust the position for a
comfortable t. Make sure that the eye
shield completely covers your eyes for
preventing LED lights from entering
your eyes.
Note: Use the device after taking o your
glasses.
2
Press and hold the Power button for 1
second on the left side of the temples
to turn on the device.
3
The default setting of the mask is
Mode 1 (Red Light + Infrared). Press
again the Power button to select the
desired mode for the mask.
Mode 1 (Red Light + Infrared):
Penetrates the surface of your skin to
reduce wrinkles.
Mode 2 (Blue Light + Red Light): Treats
your skin by targeting bacteria that can
cause acne.
4
12

4.6 The treatment time
Initial treatment course:
Mode 1 (Red Light + IR Light): 12 minutes daily for 60 Days.
Mode 2 (Blue Light + Red Light): 12 minutes daily for 30 Days.
Maintenance regime:
After you have achieved your initial treatment, reduce the use of the
device to 2 times per week for 12 minutes daily.
Start your LED treatment. The LED light
will automatically be turned o after 12
minutes.
*The light emitting surface temperature is
less than 48°C during use
5
Do not look directly at the light emitted by
the LEDs while the device is in operation.
Excessive exposure to LED light can cause
eye damage.
Note: It is recommended that you close your
eyes as much as possible during treatment.
6
It’s recommended that you apply a small
amount of moisturize cream or serum
onto the treated area after each treatment.
You can purchase our Project E Beauty
Serum at www.projectebeauty.com
7
13

5. Maintenance
5.1 Cleaning
- Be sure to unplug the device properly by holding the plug and
removing it from the USB outlet.
- Clean the device surface with a clean soft cloth dampened with clean
tap water or distilled water after each use.
- Immediately dry the surface with a clean dry soft cloth any time it
comes into contact with moisture, chemicals, or water.
- Always keep the device clean. Store the device in a clean and dry
place.
Note:
* NEVER clean the device or any of its parts with running water and
* NEVER operate or charge the device if you suspect that water is inside
the device or if water on any surface of the device.
* DO NOT open or dismantle the device, as there are no user
serviceable parts inside.
* Take care to not allow the device to be subjected to any pressure,
other than only what is needed to use, charge, and clean the device.
Excessive force may damage or weaken the bulb and other
components.
* DO NOT use alcohol or volatile organic solvents (for example, paint
thinner or nail polish remover) to clean the unit, as these substances
can weaken and/or permanently damage the device’s components.
5.2 Storage
Store the device and all its parts in a cool dry place.
Storage condition:
Temperature: -25°C to 45°C/-13°F to 113°F
Relative humidity: ≤ 75%
Note:
* Do not place or store the device where it can fall or be pushed into a tub,
sink or any other vessel containing water.
* KEEP the device away from heated surface.
*Do not store in a lint or dusty area. Avoid direct sunlight. This may damage
the device.
14

5.3 Disposal
Waste Electrical and Electronic Equipment (WEEE) This marking indicate
that this product should not be disposed with other household wastes.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer
where the product was purchased. They can take this product for
environmentally safe recycling.
15

5.4 Troubleshooting
In the event that your device fails to perform as expected, the following
suggestions will help to identify potential issues with the device and its
setup.
The unit does not
operate normally
No Power
LED Lights on the
mask ickers
during session
The charging
indicator light does
not light up when
charging
The on/o
button was not
pressed properly
- Make sure that you have
pressed the on/o button
properly. Power button should
be pressed and held for 2
seconds until the Mask powers
on
- Recharge the battery
- Connect the unit to a 5V USB
port with the charger cable.
- Check that the mask is fully
charged before use. If the
problem persists, please
contact us.
- Check that the charger is
connected properly. If the
problem persists, please
contact us.
- Charge the unit according to
the instructions in this user
manual
- Make sure that the mask has
been fully charged before use.
Check if the battery charging
indicator light on the unit
lights up to make sure the unit
is charging
The Mask was
not charged
properly
The battery is
discharged
The Mask is out
of power
The charging
indicator light
malfunction
Symptoms Couse Solution
16

5.5 Warranty
We oer 1 year free warranty for your Project E Beauty LED Light Therapy
Mask.
The warranty does not include damage caused by misuse, accident,
abuse, neglect or other external causes.
We need you to provide your name, email and order ID during warranty.
Customer Service
If your device is broken, damaged, in need of repair, or for any other user
assistance, please contact Duplex International Trading Limited:
Email: [email protected]om
Tel: [phone]
Scan the QR code or visit
www.projectebeauty.com/pages/warranty
17

6. Electromagnetic compatibility
Important information regarding Electromagnetic Compatibility
(EMC)
With the increased number of electronic devices such as PC and mobile
(cellular) telephones, radio transceivers, mobile radio transmitters,
radio-controlled toys, and so on, Medical devices in use may be
susceptible to electromagnetic interference from other device.
Electromagnetic interference may result in incorrect operation of the
medical devices and create a potentially unsafe situation. Medical
devices should also not interfere with other devices.
In order to regulate the requirements for EMC (Electromagnetic
Compatibility) with the aim to prevent unsafe product situations, the IEC
60601-1-2 standard has been implemented. This standard denes the
levels of immunity to electromagnetic interference as well as maximum
levels of electromagnetic emissions for medical devices. This unit has
been thoroughly tested and inspected to assure proper performance
and operation! This product needs special precautions regarding EMC
and needs to be installed and put into service according to the EMC
information provided, the following tables recommend minimum
separation distances between portable and mobile RF communications
equipment and Project E Beauty LED Light Therapy Mask.
Caution:
*Using cell phone or microwave oven, HF surgical equipment, magnetic
resonance imaging or other radio radiant equipment near this product
may cause malfunction or lead to loss of essential performance.
*The use of accessories and cables other than those specied by Duplex
International Trading Limited as replacement parts for internal
components, may result in increased emission or decreased immunity of
the device.
*This device should not be used adjacent to or stacked with other
equipment and that if adjacent or stacked use is necessary, this device
should be observed to verify normal operation in the conguration in
which it will be used.
*Portable RF communications equipment (including peripherals such as
antenna cables and external antennas) should be used no closer than
30cm (12 inches) to any part of the product, including cables specied
by the manufacturer. Otherwise, degradation of the performance of this
equipment could result.
*Refer to further guidance below regarding the EMC environment in
which the device should be used.
The USB power cord length of the device
USB power cord: 0.5m
18

6. Electromagnetic compatibility
Important information regarding Electromagnetic Compatibility
(EMC)
With the increased number of electronic devices such as PC and mobile
(cellular) telephones, radio transceivers, mobile radio transmitters,
radio-controlled toys, and so on, Medical devices in use may be
susceptible to electromagnetic interference from other device.
Electromagnetic interference may result in incorrect operation of the
medical devices and create a potentially unsafe situation. Medical
devices should also not interfere with other devices.
In order to regulate the requirements for EMC (Electromagnetic
Compatibility) with the aim to prevent unsafe product situations, the IEC
60601-1-2 standard has been implemented. This standard denes the
levels of immunity to electromagnetic interference as well as maximum
levels of electromagnetic emissions for medical devices. This unit has
been thoroughly tested and inspected to assure proper performance
and operation! This product needs special precautions regarding EMC
and needs to be installed and put into service according to the EMC
information provided, the following tables recommend minimum
separation distances between portable and mobile RF communications
equipment and Project E Beauty LED Light Therapy Mask.
Caution:
*Using cell phone or microwave oven, HF surgical equipment, magnetic
resonance imaging or other radio radiant equipment near this product
may cause malfunction or lead to loss of essential performance.
*The use of accessories and cables other than those specied by Duplex
International Trading Limited as replacement parts for internal
components, may result in increased emission or decreased immunity of
the device.
*This device should not be used adjacent to or stacked with other
equipment and that if adjacent or stacked use is necessary, this device
should be observed to verify normal operation in the conguration in
which it will be used.
*Portable RF communications equipment (including peripherals such as
antenna cables and external antennas) should be used no closer than
30cm (12 inches) to any part of the product, including cables specied
by the manufacturer. Otherwise, degradation of the performance of this
equipment could result.
*Refer to further guidance below regarding the EMC environment in
which the device should be used.
The USB power cord length of the device
USB power cord: 0.5m
Guidance and manufacturer's declaration – electromagnetic
emission – for all EQUIPMENT AND SYSTEMS
The Project E Beauty LED Light Therapy Mask is intended for use in the electromagnetic
environment specied below. The customer or the user of the Project E Beauty LED Light Therapy
Mask should assure that it is used in such an environment.
RF emissions
CISPR 11
The Project E Beauty LED Light Therapy Mask uses RF
energy only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any
interference in nearby electronic equipment.
The Project E Beauty LED Light Therapy Mask is suitable
for use in all establishments, including domestic
establishments and those directly connected to the
public low-voltage power supply network that supplies
buildings used for domestic purposes.
Group 1
RF emission
CISPR 11 Class B
Harmonic emissions
IEC 6100-3-2 Complies
Voltage uctuations
/ icker emissions
IEC 61000-3-3
Complies
Guidance and manufacturer´s declaration – electromagnetic emission
Emission test Compliance Electromagnetic environment - guidance
1
2
3
4
5
6
7
19