Prolitec AIRQ AQ880 User manual

AQ880 QUICKSTART GUIDE
Prolitec Product Safety and Support toll-free: 1-844-247-7599
Welcome to your sleek new AQ880 diuser. It is a free-standing tower that simply
needs to be placed near a 110 to 240V outlet. These easy steps will get you started.
SCENT SYSTEM SET UP INSTRUCTIONS:
1. Unpack the box. Inside you will nd:
• The AQ880 appliance
• The power supply
• The key
*note: the fragrance cartridge will be in a separate box
2. Aach the power supply into the port at the back of the appliance and plug
into the outlet
3. Use the key to unlock and open the door of the cartridge housing door.
4. Prepare the cartridge
• Remove the big plug from
the air-stem port (A)
• Remove the black screw cap
from the top outlet (B)
5. Place the fragrance cartridge into the appliance.
6. Insert the air-stem from the appliance into the air-stem port in the
cartridge. Rotate to lock into place.
7. Place and ghten the plume kit ghtly on the top outlet.
8. Press the power buon
9. Set the clock:
• Press the “next” buon to select “Opons”
• Use and to select the correct day of the week, press
• Repeat to set the hours & minutes and nally, select am/pm
or 24hr clock
• For more details on seng the clock, use the
QR Code here to access the instruconal video:
A
B
Plume Kit
Air Stem

AQ880 QUICKSTART GUIDE
Prolitec Product Safety and Support toll-free: 1-844-247-7599
10. Choose how oen the appliance diuses by using the and buons to
select NOC (diuses every 7 minutes), SOC (diuses every 2 minutes), or VSOC
(diuses every 30 seconds), press
11. Next, use the and buons to select the fan speed, 0 (o) to 5 (high),
press
12. Program the appliance for your open/peak hours:
• Press the to move past “Opons,” through “24/7” and “Run
Program,” to “Set Program”
• You can set up to 21 dierent programs. Press the and buons
to choose which program you are seng. Press
• Choose if this program is On or O by using and . Choose On
and press
• Adjust the scent intensity (0 - 50) by using and . Press
• Select the days the program will run by using and . Press
• Set the start me, both hour and minutes, by using and , Press
• Repeat to set the stop mes
• You are all set for this program! Repeat if you’d like to set addional
programs for dierent days of the week.
• If you need more details on how to program the
appliance, use the QR Code here to access the
instruconal video:
13. Use the buon to navigate back to “Run Program”
14. Close and lock the appliance door. Posion the appliance so it faces where
you’d like to scent. You’re all set!
If you need more detailed
help, please reach out to us
or nd the full manual here:
Enjoy your new perfectly scented environment!