Promate Bonsai-Qi User manual

Wireless Stereo Speaker with Wireless Charging Station and LED Lamp
Qi Wireless Charging • Brightness Touch Control • Auto Sleep Mode • Soothing Light

Introduction
Bonsai-Qi is a LED night lamp with multiple uses. You can control the brightness of the light with
a simple touch. It is also a Bluetooth speaker that adds the right music with the perfect ambience
light. You can connect it to your smartphone, tablet or computer and enjoy the music. At the
base of the lamp, you can wirelessly charge your favourite devices. With all these functions
compiled in one single body, it becomes a must have for every household or office.
Packaging Contents
• Bonsai-Qi
• Charging Adaptor
• User Guide
Specifications
• Bluetooth Version: v4.0
• Bluetooth Chipset: Realtek RTL8761ATV
• Bluetooth Frequency:2.4GHZ
• Bluetooth Profile: A2DP, AVRCP
• Power Input:5V, 4A
• Speaker Output:5W*1
• Impedance:4Ω
• Operating Distance: 15 meters
• QI Wireless Charging: 5V, 1A
• Brightness: 2000Lumens

Features
• Bluetooth Speaker: Connect your smartphone, tablet or computer to play your favourite music.
• Qi Wireless Charging Station: Wirelessly charge your devices by simply placing them at the
base of Bonsai-Qi
• Touch Sensor: Touch or tap to increase or decrease the brightness level of the lamp.
• Auto Sleep Mode: When left untouched it switches off automatically for power efficiency.
• Soothing light: The controllable light is perfect to create the best soothing and relaxing
ambience.
Precautions
Please read all safety instructions and warnings thoroughly before using this product. Improper use
of this product may result in damage to this or attached products.
1. Do not disassemble the product or attempt to fix it.
2. Kindly use an original charging cable provided.
3. Do not attempt to replace any part of this product or battery inside.
4. Do not crush, puncture, dispose of in fire, short the contacts or expose the product to water or
other liquids.
5. Do not store or use the product in a high-temperature environment, including intense
sunlight or heat.
6. Avoid drops, bumps, abrasions and impacts.
7. If there is any reason to believe that there is damage to the product, discontinue use immediately.
8. If you find that the product is too hot, is emitting an odour, or is deformed, punctured or exhibits
any suspicious or abnormal behaviour, discontinue use immediately and contact our customer service.

1. Power Button
2. LED Light
3. Qi Wireless Charging Pad
4. LED Brightness Controller
5. Charge-In port
6. Volume –
7. Volume +
6 7
1
2
3
4
5

Operation Instructions
1. Plugging in AC Adapter
2. Turning the LED Light On/Off:
• The light will on automatically when plugging in
• Touch the “LED Brightness Controller” again to turn off the light
• Touch the “LED Brightness Controller” for 3 Seconds to switch the lamp to “Auto-Sleep”mode
where the light turns off within 30 Seconds.
3. Brightness Control:
• Slide your finger over the““LED Brightness Controller” to dim or brighten the LED light.
4. Qi Wireless Charging:
• Place your Qi Wireless Charging enabled smartphone over the Qi Wireless Charging Pad.
• Your smartphone will now begin charging.
• The indicator light on pad will change from Yellow into blue

5. Paring Bonsai-Qi
• Press and hold the“Power Button” until the Bluetooth Indicator flashes with voice ”Disconnected”.
• Turn on the Bluetooth function on your smartphone/tablet and search for“Bonsai-Qi” in the
available device list.
• Pair the device to your smartphone/tablet.with voice ”Connected”
• Control the volume and playback via the connected device. Or you can control the volume by
quick click “+” or “-”, long press ”+” for next song; ”long press ”-” for last song.