Promate bikeRock User manual

User Guide
Sporty Bluetooth Mini Speaker
with Bike Mount
bikeRock

Introducon:
Thank you for purchasing Promate bikeRock, a Sporty Bluetooth Mini Speaker with
Bike Mount. Usage-on-the go, bikeRock is a super sporty Bluetooth Mini Speaker
along with a Bike Mount for music lovers who want their share of music wherever
they go. Simple play-and-pause buons and ease of navigaon makes it disncve.
You can always stay connected with your loved ones with the built-in mic for
handsfree conversaons. With a baery that lasts for hours, you can always have
your music around. Its sleek design and easy compability makes it suitable for
every music lover.
Packaging Content:
• bikeRock Speaker
• Bike Mount
• AUX Cable
• User Guide
• Rainproof Pouch
• Hook
• Sling
Specificaon:
• Bluetooth Version: v2.1 + EDR
• Bluetooth Profiles: A2DP, AVRCP, HSP, HFP
• Input Power: DC 5V/1A
• Output Power: 3W
• Impedance: 4 Ω
• Speaker Frequency: 100Hz-20KHz
• Signal-to-noise Ratio: 75dB
• Charging Time: 3- 5 hours
• Playing Time: 8hours (75% volume)
• Battery Capacity: 600mAh
• Operating Distance: 10meters
• Made from PC
1

Features:
• Sleek, very compact Bluetooth speaker.
• Bike Mount and usage on-the-go.
• Stream your music over Bluetooth by syncing with a compatible device.
• Simple and distinctive touch play-and-pause button
• Built-in battery that lasts for hours, it can be used both indoors and outdoors.
• Not to forget the bike mount.
• Built-in mic for handsfree conversations
• Easy navigation through playlist with hands-on navigation buttons on side.
Compability:
All Bluetooth enabled smartphones and tablets.
2

Precauons:
Please read all safety instrucons and warnings thoroughly before using this product.
Improper use of this product may result in damage to this or aached products.
• Do not disassemble the device or aempt to fix it.
• Kindly use the included Micro-USB Cable to charge the product.
• Do not aempt to replace any part of this case or baery inside.
• Do not crush, puncture or dispose of in fire.
• Do not store or use the baery in a high temperature environment, including
intense sunlight or heat.
• Avoid excessive drops, bumps, abrasions and impacts.
• If there is any reason to believe that there is internal damage to the device,
disconnue use immediately.
• If you find that the device is too hot, is eming an odour or is deformed,
punctured or exhibits any suspicious or abnormal behavior, disconnue use
immediately and contact our customer service.
• Always charge this product before extended storage.
3

Appearance & Interface Descripon:
4
1
3
46
7
5
2
1. Power On/Off.
2. Rewind Track/ Increase Volume Buon
3. Forward Track/ Decrease Volume Buon
4. Charging Indicator
5. Micro-USB Charging Port
6. TF Card Slot
7. Play/Pause Buon, Answering Calls
8. Bike Mount

Operation Instructions:
1. Charging bikeRock
• Connect bikeRock to a PC/Laptop/Mac or 5V USB adaptor (not included)
with the USB cable included
• Red light turns ON during charging, turns OFF after the device is fully
charged.
2. Paring bikeRock with mobiles (Bluetooth enabled) and Tablets.
1. Turn on bikeRock using the power switch
2. The blue light on top starts blinking, the speaker is standby for pairing.
3. Turn on the Bluetooth function on your phone and search for “bikeRock” in
the available device list.
4. Pair the device to your phone using the passkey (0000)
5. After successful pairing, blinking stops.
3. Switching between TF Card Mode and Bluetooth mode.
1. Insert TF Card into the TF card slot.
2. bikeRock automatically goes into TF card mode and will begin playing the
first music file.
3. Press the mode button to switch between TF Card and Bluetooth mode.
4. Answering Calls
1. Press once to answer a call.
2. Press for more than 2. seconds to decline a call
3. Music will continue after the call ends
5. Volume control:
• Control volume via the paired devices, such as iPhone, iPad, Mobile phones,
PC/Mac…etc. or even using the volume rocker buttons on the device.
5

Operation Instructions:
1. Charging bikeRock
• Connect bikeRock to a PC/Laptop/Mac or 5V USB adaptor (not included)
with the USB cable included
• Red light turns ON during charging, turns OFF after the device is fully
charged.
2. Paring bikeRock with mobiles (Bluetooth enabled) and Tablets.
1. Turn on bikeRock using the power switch
2. The blue light on top starts blinking, the speaker is standby for pairing.
3. Turn on the Bluetooth function on your phone and search for “bikeRock” in
the available device list.
4. Pair the device to your phone using the passkey (0000)
5. After successful pairing, blinking stops.
3. Switching between TF Card Mode and Bluetooth mode.
1. Insert TF Card into the TF card slot.
2. bikeRock automatically goes into TF card mode and will begin playing the
first music file.
3. Press the mode button to switch between TF Card and Bluetooth mode.
4. Answering Calls
1. Press once to answer a call.
2. Press for more than 2. seconds to decline a call
3. Music will continue after the call ends
5. Volume control:
• Control volume via the paired devices, such as iPhone, iPad, Mobile phones,
PC/Mac…etc. or even using the volume rocker buttons on the device.
6
Remove the screw from the bike
attachment. Place the clasp around
the handle bar and fix it using the
screw.
Place the Bluetooth speaker onto
the holder.
Hold the holder by one hand and
press the whole body into the
holder gently.
Adjust and fix the speaker to make
it safe and comfortable
Quick Start Guide for Bike Holder: