Protekt AC 010 User manual

AC 010 is a guided-type fall arrester device on flexible anchorage guide.
The rope grab is sliding on ø14 mm polyamide rope.
AC 010 is a component of personal protective equipment against falls from a height.
AC 010 guided-type fall arrester complies with EN 353-2.
!rope grab with energy dissipating element . Energy dissipating element can be equipped only with certified
connector (snap hook) . The total length of the dissipating element (energy absorber) with connector shall not exceed 44 cm.
!working rope (ø14 mm kernmantle polyamide). The rope is ended with sewn loops equipped with thimbles.
(acording EN 362)
BASIC EQUIPMENT
working rope ø14 mm
identity label
of the working rope
top end
of the working rope
(the loop with the thimble)
front view
identity label of the rope grab
energy dissipating
element
connector*
AC 010
rope grab
PROTEKT 93-403 LODZ ul. Starorudzka 9 POLAND TEL: [phone]; FAX: [phone]; www.protekt.com.pl
bottom end
of the working rope
(the loop with the thimble)
back view
EN 353-2:2002
Date of manufacture:
02.2005
ADMISSIBLE USING ONLY WITH ROPES OF DIAMETER f14 mm
Serial number:
00001
GUIDED-TYPE FALL ARRESTER
AC 010
MARKING
AC 100 XX*
WORKING ROPE
EN 353-2:2002
Date of manufacture: 02.2003
Serial number: 00001
LENGTH: XX m
POLYAMIDE
DIAMETER: ø14 mm
EC type examination carried out by CETE APAVE SUDEUROPE, BP 193, 13322 Marseille, France - 0082
1.
2. reference number
3. European standard (number/year).
4. CE marking and number of a notified
body controlling manufacturing of the
equipment (art. 11).
5. month/year of manufacture.
6. number of manufacturing serie.
name (type) of the device. 7. caution: read the manual
8. marking of device manufacturer of
distributor.
9. material of which the device is made of.
10. diameter of the rope.
11. length of the rope.
1
1
2
9
10
11
5
6
3
4
8
2 5
3 4 6 87
GUIDED-TYPE FALL ARRESTER
ON FLEXIBLE ANCHORAGE LINE
Rope grab ref. number: AC 010
Instruction Manual
READ CAREFULLY BEFORE USE
THE EQUIPMENT
AC 010
Working rope ref. number: AC 100 XX
EN 353-2:2002
the total length of the energy absorber
with connector shall not exceed 44 cm
for use on ropes of ø14 mm onlydiameter
ATTENTION: the total length of the dissipating element (energy absorber) with connector shall not exceed 44 cm.
*) xx - code of length
for example: xx=03 - length 3 m
xx=20 - length 20 m Using the AC 010 fall arrester in connection with fall arrest system must be compatible with use instructions of the fall arrest systems and obligatory standards:
- EN361 - for the safety harness;
- EN353-2, EN354, EN362 - for the fall arrest systems;
- EN 795 - for anchorages
- EN358 - for the work positioning systems.
*) Energy dissipating element shall be equipped with a connector
certified according EN 362 and the total length of the dissipating
element (energy absorber) with connector shall not exceed 44 cm.
!personal protective equipment must be withdrawn from use immediately when
confirmed in writing by equipment manufacturer or his representative after carried out the detailed inspection.
!personal protective equipment must be withdrawn from use immediately and destroyed when it have been used to arrest a fall.
,
!a full body harness is the only acceptable body holding device that can be used in a fall arrest system.
!in full body harness use only attaching points marked with big letter "A" to attach a fall arrest system. Marking like "A/2'" or a half of "A" means the necessity
of attaching a fall arrest system to both attaching points together simultaneously. It is strictly forbidden to attach a fall arrest system to the single attaching
point marked "A/2'" or a half of "A". See drawings below:
!the anchor device or anchor point for the fall arrest system should always be positioned, and the work carried out in such a way, as to minimise both the
potential for falls and potential fall distance. The anchor device/point should be placed above the position of the user . The shape and construction of the
anchor device/point shall not allowed to self-acting disconnection of the equipment. Minimal static strength of the anchor device/point is 15 kN. It is
recommended to use certified and marked structural anchor point complied with EN795.
!it is obligatory to verify the free space required beneath the user at the workplace before each occasion of use the fall arrest system, so that, in the case of a
fall, there will be no collision with the ground or other obstacle in the fall path. The required value of the free space should be taken from instruction manual
of used equipment.
!there are many hazards that may affect the performance of the equipment and corresponding safety precautions that have to be observed during equipment
utilization, especially:
- trailing or looping of lanyards or lifelines over sharp edges; - any defects like cutting, abrasion, corrosion; - climatic exposure;
- pendulum falls; - extremes of temperature; - chemical reagents; - electrical conductivity.
!personal protective equipment must be transported in the package (e.g.: bag made of moisture-proof textile or foil bag or cases made of steel or plastic) to
protect it against damage or moisture.
!the equipment can be cleaned without causing adverse effect on the materials in the manufacture of the equipment. For textile products use mild detergents
for delicate fabrics, wash by hand or in a machine and rinse in water. Plastic parts can be cleaned only with water. When the equipment becomes wet, either
from being in use or when due cleaning, it shall be allowed to dry naturally, and shall be kept away from direct heat. In metallic products some mechanic
parts (spring, pin, hinge, etc.) can be regularly slightly lubricated to ensure better operation.
Other maintenance and cleaning procedures should be adhered to detailed instructions stated in the manual of the equipment.
!personal protective equipment should be stored loosely packed, in a well-ventilated place, protected from direct light, ultraviolet degradation, damp
environment, sharp edges, extreme temperatures and corrosive or aggressive substances.
any doubt arise about its condition for safe use and not used again until
TIME OF USE
The rope grab can be used for 5 years caunting from a date of putting it into operation. After this period the rope grab must be withdrawn from use to carry out
detailed manufacturer’s inspection.
The inspection can be carried out by:
- manufacturer
- or person recommended by the manufacturer
- or company recommended by manufacturer.
During this inspection will be established admissible time of use of the rope grab till next fabric control.
Working rope must be withdrawn from use and destroyed after 5 years of use.
Whole fall arrester including rope grab, working rope and connectors must be withdrawn from use immediately and destroyed when it have been used to arrest a fall.
A
FALL ARREST SYSTEM
HARNESS ATTACHING POINT
AHARNESS ATTACHING HALF POINTS
FALL ARREST SYSTEM
FORBIDDEN!

REQUIRED FREE DISTANCE BELOW WORKING LEVEL
!structural anchor point to which will be connected working rope should be situated above working position and should has static resistance min. 15kN.
Free distance below the working surface depends on the length of the working rope under the worker - see the table and drawingA:
o
!during horizontal moving of the worker, the working rope deflection from the vertical line up to 45 is allowed - see the drawing B.
WORKING IN ONE STAND
!during the work in one stand the rope grab should be moved (by hand) under the line of the connecting buckle of the harness and blocked on the working
rope. Stopped in one place rope grab is not disturbing the worker. See the drawings below:
CONNECTING AC 010 ROPE GRAB TO THE SAFETY HARNESS
!AC 010 rope grab must be connected to front or back attaching point of full body harness. The full body
harness must comply with EN361
!it is strictly forbidden to connect AC 010 rope grab to the work positioning belt
!it is strictly forbidden to add any additional element between rope grab's snap hook and attaching point of the
harness
R>10 mm
INSTALLING THE ROPE GRAB ON THE WORKING ROPE
pull down
the safety pin
push down by the pin
the safety button
open the walls
of the rope grab after closing the walls
the rope grab has locked
automaticly
the narrow located
on the front wall
of the rope grab
must be directed up
to the top end
of the working rope
close the walls
1
3
2
4 5
release
the pusher
spring
pull down
the locking
lever
1 2
USP AC 010
PN-EN353-2
Nrkat.:AC 010
Data
produkcji:
DOPUSZCZONEDOSTOSOWANIAWY£¥CZNIEZ LINAMI f14 mm
Numer
urz¹dzenia:
Przedzastosowaniem
zapoznaæsiêdok³adnie
zinstrukcj¹u¿ytkowania
POLAND
93-403£ódŸ
ul.Starorudzka9
tel/fax:[phone]
(0 42) 683 03 22
USPAC 010
PN-EN353-2
Nrkat.:AC010
Data
produkcji:
DOPUSZCZONEDOSTOSOWANIAWY£¥CZNIEZLINAMI f
14mm
Numer
urz¹dzenia:
Przedzastosowaniem
zapoznaæsiêdok³adnie
zinstrukcj¹u¿ytkowania
POLAND
93-403£ódŸ
ul.Starorudzka9
tel/fax:[phone]
[phone]
USP AC 010
PN-EN353-2
Nrkat.:AC 010
Data
produkcji:
DOPUSZCZONEDOSTOSOWANIAWY£¥CZNIE Z LINAMI f14mm
Numer
urz¹dzenia:
Przedzastosowaniem
zapoznaæsiêdok³adnie
zinstrukcj¹u¿ytkowania
POLAND
93-403£ódŸ
ul.Starorudzka9
tel/fax:[phone]
[phone]
USP AC 010
PN-EN353-2
Nrkat.:AC 010
Data
produkcji:
DOPUSZCZONEDOSTOSOWANIAWY£¥CZNIEZ LINAMI f14 mm
Numer
urz¹dzenia:
Przedzastosowaniem
zapoznaæsiêdok³adnie
zinstrukcj¹u¿ytkowania
POLAND
93-403£ódŸ
ul.Starorudzka9
tel/fax:[phone]
(0 42) 683 03 22
USPAC010
PN-EN353-2
Nrkat.:AC010
Data
produkcji:
DOPUSZCZONEDOSTOSOWANIAWY£¥CZNIEZLINAMIf
14mm
Numer
urz¹dzenia:
Przedzastosowaniem
zapoznaæsiêdok³adnie
zinstrukcj¹u¿ytkowania
POLAND
93-403£ódŸ
ul.Starorudzka9
tel/fax:[phone]
[phone]
USPAC 010
PN-EN353-2
Nrkat.:AC010
Data
produkcji:
DOPUSZCZONEDOSTOSOWANIAWY£¥CZNIEZLINAMIf14mm
Numer
urz¹dzenia:
Przedzastosowaniem
zapoznaæsiêdok³adnie
zinstrukcj¹u¿ytkowania
POLAND
93-403£ódŸ
ul.Starorudzka9
tel/fax:[phone]
(042) 683 03 22
o
max. 45
A
X
L
B
Length of the rope over the worker [m] - L
Free distance below the working surface [m] - X
10 20 30 40 50
3,2 4,60 6,00 7,40 8,80
Structural anchor point
min. 15 kN
Structural
anchor point
min. 15 kN
Attention!
Structural anchor
point should has
static resistance
min.15 kN.
The shape of the
structural anchor
point should not let
self-acting
disconnection of the
rope
CONNECTING THE WORKING ROPE TO THE STRUCTURAL ANCHOR POINT
Structural
anchor point
min. 15 kN
Structural
anchor point
min. 15 kN
Structural
anchor point
min. 15 kN
Structural
anchor point
min. 15 kN
Structural
anchor point
min. 15 kN
FORBIDDEN ! FORBIDDEN !
install the working
rope inside the bend
of the rope grab
front wall
!personal protective equipment shall only be used by a person trained and competent in its safe use.
!personal protective equipment must not be used by a person with medical condition that could affect the safety of the equipment user in normal and
emergency use.
!a rescue plan shall be in place to deal with any emergencies that could arise during the work.
!it is forbidden to make any alterations or additions to the equipment without the manufacturer's prior written consent.
!any repair shall only be carried out by equipment manufacturer or his certified representative.
!personal protective equipment shall not be used outside its limitations, or for any purpose other than that for which it is intended.
!personal protective equipment should be a personal issue item.
!before use ensure about the compatibility of items of equipment assembled into a fall arrest system. Periodically check connecting and adjusting of the
equipment components to avoid accidental loosening or disconnecting of the components.
!it is forbidden to use combinations of items of equipment in which the safe function of any one item is affected by or interferes with the safe function of another.
!before each use of personal protective equipment it is obligatory to carry out a pre-use check of the equipment, to ensure that it is in a serviceable condition
and operates correctly before it is used.
!during pre-use check it is necessary to inspect all elements of the equipment in respect of any damages, excessive wear, corrosion, abrasion, cutting or
incorrect acting, especially take into consideration:
- in full body harnesses and belts - buckles, adjusting elements, attaching points, webbings, seams, loops;
- in energy absorbers - attaching loops, webbing, seams, casing, connectors;
- in textile lanyards or lifelines or guidelines - rope, loops, thimbles, connectors, adjusting element, splices;
- in steel lanyards or lifelines or guidelines - cable, wires, clips, ferrules, loops, thimbles, connectors, adjusting elements;
- in retractable fall arresters - cable or webbing, retractor and brake proper acting, casing, energy absorber, connector;
- in guided type fall arresters - body of the fall arrester, sliding function, locking gear acting, rivets and screws, connector, energy absorber;
- in connectors - main body, rivets, gate, locking gear acting.
THE ESSENTIAL PRINCIPLES FOR USERS OF PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT
!after every12 months of utilization, personal protective equipment must be withdrawn from use to carry out periodical detailed inspection. The periodic
inspection must be carried out by a competent person for periodic inspection. The periodic inspection can be carried out also by the manufacturer or his
authorized representative.
In case of some types of the complex equipment e.g. some types of retractable fall arresters the annual inspection can be carried out only by the manufacturer
or his authorized representative.
!regular periodic inspections are the essential for equipment maintenance and the safety of the users which depends upon the continued efficiency and
durability of the equipment.
!during periodic inspection it is necessary to check the legibility of the equipment marking.
!it is essential for the safety of the user that if the product is re-sold outside the original country of destination the reseller shall provide instructions for use, for
maintenance, for periodic examination and for repair in language of the country in which the product is to be used.

IDENTITY CARD
PERIODIC EXAMINATION AND REPAIR HISTORY
1
2
DATE
REASON FOR
ENTRY PERIODIC EXAMINATION
OR REPAIR
3
4
SERIAL NUMBER
USER NAME
DATE OF MANUF.
DATE OF PUTTING INTO OPERATION
DATE OF PURCHASE
IT IS THE RESPONSIBILITY OF THE USER ORGANISATION TO PROVIDE THE IDENTITY CARD AND TO FILL IN THE DETAILS REQUIRED.
THE IDENTITY CARD SHOULD BE FILLED IN BEFORE THE FIRST USE BY A COMPETENT PERSON, RESPONSIBLE INTHE USER ORGANIZATION FOR PROTECTIVE EQUIPMENT.
ANY INFORMATION ABOUT THE EQUIPMENT LIKE PERIODIC INSPECTIONS, REPAIRS, REASONS OF EQUIPMENT'S WITHDRAWN FROM USE SHALL BE NOTED INTO THE IDENTITY CARD BY A COMPETENT PERSON.
THE IDENTITY CARD SHOULD BE STORAGED DURING A WHOLE PERIOD OF EQUIPMENT UTILIZATION.
DO NOT USE THE EQUIPMENT WITHOUT THE IDENTITY CARD.
ALL RECORDS IN THE IDENTITY CARD CAN BE FILLED IN ONLY BY A COMPETENT PERSON.
REF. NUMBER LENGTH
DEFECTS NOTED,
REPAIRS CARRIED OUT
AND OTHER REVELANT INFORMATIONS
NAME AND SIGNATURE
OF COMPETENT PERSON
PERIODIC
EXAMINATION
NEXT DUE DATE
GUIDED-TYPE FALL ARRESTER ON FLEXIBLE ANCHORAGE LINE
PROTEKT 93-403 LODZ ul. Starorudzka 9 POLAND TEL: [phone]; FAX: [phone]; www.protekt.com.pl
IDENTITY CARD
PERIODIC EXAMINATION AND REPAIR HISTORY
1
2
DATE
REASON FOR
ENTRY PERIODIC EXAMINATION
OR REPAIR
3
4
SERIAL NUMBER
USER NAME
DATE OF MANUF.
DATE OF PUTTING INTO OPERATION
DATE OF PURCHASE
IT IS THE RESPONSIBILITY OF THE USER ORGANISATION TO PROVIDE THE IDENTITY CARD AND TO FILL IN THE DETAILS REQUIRED.
THE IDENTITY CARD SHOULD BE FILLED IN BEFORE THE FIRST USE BY A COMPETENT PERSON, RESPONSIBLE INTHE USER ORGANIZATION FOR PROTECTIVE EQUIPMENT.
ANY INFORMATION ABOUT THE EQUIPMENT LIKE PERIODIC INSPECTIONS, REPAIRS, REASONS OF EQUIPMENT'S WITHDRAWN FROM USE SHALL BE NOTED INTO THE IDENTITY CARD BY A COMPETENT PERSON.
THE IDENTITY CARD SHOULD BE STORAGED DURING A WHOLE PERIOD OF EQUIPMENT UTILIZATION.
DO NOT USE THE EQUIPMENT WITHOUT THE IDENTITY CARD.
ALL RECORDS IN THE IDENTITY CARD CAN BE FILLED IN ONLY BY A COMPETENT PERSON.
REF. NUMBER LENGTH
DEFECTS NOTED,
REPAIRS CARRIED OUT
AND OTHER REVELANT INFORMATIONS
NAME AND SIGNATURE
OF COMPETENT PERSON
PERIODIC
EXAMINATION
NEXT DUE DATE
GUIDED-TYPE FALL ARRESTER ON FLEXIBLE ANCHORAGE LINE
PROTEKT 93-403 LODZ ul. Starorudzka 9 POLAND TEL: [phone]; FAX: [phone]; www.protekt.com.pl

ROPE GRAB AC 010
IDENTITY CARD
PERIODIC EXAMINATION AND REPAIR HISTORY
1
2
DATE
REASON FOR
ENTRY PERIODIC EXAMINATION
OR REPAIR
3
4
SERIAL NUMBER
USER NAME
DATE OF MANUF.
DATE OF PUTTING INTO OPERATION
DATE OF PURCHASE
IT IS THE RESPONSIBILITY OF THE USER ORGANISATION TO PROVIDE THE IDENTITY CARD AND TO FILL IN THE DETAILS REQUIRED.
THE IDENTITY CARD SHOULD BE FILLED IN BEFORE THE FIRST USE BY A COMPETENT PERSON, RESPONSIBLE INTHE USER ORGANIZATION FOR PROTECTIVE EQUIPMENT.
ANY INFORMATION ABOUT THE EQUIPMENT LIKE PERIODIC INSPECTIONS, REPAIRS, REASONS OF EQUIPMENT'S WITHDRAWN FROM USE SHALL BE NOTED INTO THE IDENTITY CARD BY A COMPETENT PERSON.
THE IDENTITY CARD SHOULD BE STORAGED DURING A WHOLE PERIOD OF EQUIPMENT UTILIZATION.
DO NOT USE THE EQUIPMENT WITHOUT THE IDENTITY CARD.
ALL RECORDS IN THE IDENTITY CARD CAN BE FILLED IN ONLY BY A COMPETENT PERSON.
DEFECTS NOTED,
REPAIRS CARRIED OUT
AND OTHER REVELANT INFORMATIONS
NAME AND SIGNATURE
OF COMPETENT PERSON
PERIODIC
EXAMINATION
NEXT DUE DATE
GUIDED-TYPE FALL ARRESTER ON FLEXIBLE ANCHORAGE LINE
ROPE GRAB AC 010
IDENTITY CARD
PERIODIC EXAMINATION AND REPAIR HISTORY
1
2
DATE
REASON FOR
ENTRY PERIODIC EXAMINATION
OR REPAIR
3
4
SERIAL NUMBER
USER NAME
DATE OF MANUF.
DATE OF PUTTING INTO OPERATION
DATE OF PURCHASE
IT IS THE RESPONSIBILITY OF THE USER ORGANISATION TO PROVIDE THE IDENTITY CARD AND TO FILL IN THE DETAILS REQUIRED.
THE IDENTITY CARD SHOULD BE FILLED IN BEFORE THE FIRST USE BY A COMPETENT PERSON, RESPONSIBLE INTHE USER ORGANIZATION FOR PROTECTIVE EQUIPMENT.
ANY INFORMATION ABOUT THE EQUIPMENT LIKE PERIODIC INSPECTIONS, REPAIRS, REASONS OF EQUIPMENT'S WITHDRAWN FROM USE SHALL BE NOTED INTO THE IDENTITY CARD BY A COMPETENT PERSON.
THE IDENTITY CARD SHOULD BE STORAGED DURING A WHOLE PERIOD OF EQUIPMENT UTILIZATION.
DO NOT USE THE EQUIPMENT WITHOUT THE IDENTITY CARD.
ALL RECORDS IN THE IDENTITY CARD CAN BE FILLED IN ONLY BY A COMPETENT PERSON.
DEFECTS NOTED,
REPAIRS CARRIED OUT
AND OTHER REVELANT INFORMATIONS
NAME AND SIGNATURE
OF COMPETENT PERSON
PERIODIC
EXAMINATION
NEXT DUE DATE
GUIDED-TYPE FALL ARRESTER ON FLEXIBLE ANCHORAGE LINE
PROTEKT 93-403 LODZ ul. Starorudzka 9 POLAND TEL: [phone]; FAX: [phone]; www.protekt.com.pl PROTEKT 93-403 LODZ ul. Starorudzka 9 POLAND TEL: [phone]; FAX: [phone]; www.protekt.com.pl