PSC Magellan 2200VS omega Installation and operation manual

Magellan®2200VS and
2300HS
Product Reference Guide
Model 2200VS shown

PSC Inc
959 Terry Street
Eugene, Oregon 97402
Telephone: [phone]
Fax: [phone]
Copyright ©2003 PSC Inc. An Unpublished Work - All rights reserved. No part of the contents of this documentation or the pro-
cedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of
PSC Inc. or its wholly owned subsidiaries ("PSC"). Owners of PSC products are hereby granted a non-exclusive, revocable
license to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not
remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all
notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by contacting PSC Customer Administra-
tion. Electronic versions may either be downloadable from the PSC web site (www.pscnet.com) or provided on appropriate
media. If you visit our web site and would like to make comments or suggestions about this or other PSC publications, please let
us know via the “Contact PSC” page.
Disclaimer
Reasonable measures have been taken to ensure that the information included in this manual is complete and accurate. How-
ever, PSC reserves the right to change any specification at any time without prior notice.
PSC is a registered trademark of PSC Inc. The PSC logo is a trademark of PSC. All other trademarks and trade names referred
to herein are property of their respective owners.
This product may be covered by one or more of the following patents: 4603262 • 4639606 • 4652750 • 4672215 • 4699447 • 4709195 • 4709369
• 4749879 • 4792666 • 4794240 • 4798943 • 4799164 • 4820911 • 4845349 • 4861972 • 4861973 • 4866257 • 4868836 • 4879456 • 4939355 •
4939356 • 4943127 • 4963719 • 4971176 • 4971177 • 4991692 • 5001406 • 5015831 • 5019697 • 5019698 • 5086879 • 5115120 • 5144118 •
5146463 • 5179270 • 5198649 • 5200597 • 5202784 • 5208449 • 5210397 • 5212371 • 5212372 • 5214270 • 5229590 • 5231293 • 5232185 •
5233169 • 5235168 • 5237161 • 5237162 • 5239165 • 5247161 • 5256864 • 5258604 • 5258699 • 5260554 • 5274219 • 5296689 • 5298728 •
5311000 • 5327451 • 5329103 • 5330370 • 5347113 • 5347121 • 5371361 • 5382783 • 5386105 • 5389917 • 5410108 • 5420410 • 5422472 •
5426507 • 5438187 • 5440110 • 5440111 • 5446271 • 5446749 • 5448050 • 5463211 • 5475206 • 5475207 • 5479011 • 5481098 • 5491328 •
5493108 • 5504350 • 5508505 • 5512740 • 5541397 • 5552593 • 5557095 • 5563402 • 5565668 • 5576531 • 5581707 • 5594231 • 5594441 •
5598070 • 5602376 • 5608201 • 5608399 • 5612529 • 5629510 • 5635699 • 5641958 • 5646391 • 5661435 • 5664231 • 5666045 • 5671374 •
5675138 • 5682028 • 5686716 • 5696370 • 5703347 • 5705802 • 5714750 • 5717194 • 5723852 • 5750976 • 5767502 • 5770847 • 5786581 •
5786585 • 5787103 • 5789732 • 5796222 • 5804809 • 5814803 • 5814804 • 5821721 • 5822343 • 5825009 • 5834708 • 5834750 • 5837983 •
5837988 • 5852286 • 5864129 • 5869827 • 5874722 • 5883370 • 5905249 • 5907147 • 5923023 • 5925868 • 5929421 • 5945670 • 5959284 •
5962838 • 5979769 • 6000619 • 6006991 • 6012639 • 6016135 • 6024284 • 6041374 • 6042012 • 6045044 • 6047889 • 6047894 • 6056198 •
6065676 • 6069696 • 6073849 • 6073851 • 6094288 • 6112993 • 6129279 • 6129282 • 6134039 • 6142376 • 6152368 • 6152372 • 6155488 •
6166375 • 6169614 • 6173894 • 6176429 • 6188500 • 6189784 • 6213397 • 6223986 • 6230975 • 6230976 • 6237852 • 6244510 • 6259545 •
6260763 • 6266175 • 6273336 • 6276605 • 6279829 • 6290134 • 6290135 • 6293467 • 6303927 • 6311895 • 6318634 • 6328216 • 6332576 •
6332577 • 6343741 • 6,568,598 • 6,578,765 • AU703547 • D312631 • D313590 • D320011 • D320012 • D323492 • D330707 • D330708 •
D349109 • D350127 • D350735 • D351149 • D351150 • D352936 • D352937 • D352938 • D352939 • D358588 • D361565 • D372234 • D374630
• D374869 • D375493 • D376357 • D377345 • D377346 • D377347 • D377348 • D388075 • D446524 • EP0256296 • EP0260155 • EP0260156 •
EP0295936 • EP0325469 • EP0349770 • EP0368254 • EP0442215 • EP0498366 • EP0531645 • EP0663643 • EP0698251 • GB2252333 •
GB2284086 • GB2301691 • GB2304954 • GB2307093 • GB2308267 • GB2308678 • GB2319103 • GB2333163 • GB2343079 • GB2344486 •
GB2345568 • GB2354340 • ISR107546 • ISR118507 • ISR118508 • JP1962823 • JP1971216 • JP2513442 • JP2732459 • JP2829331 •
JP2953593 • JP2964278 • MEX185552 • MEX187245 • RE37166 • Other Patents Pending

Product Reference Guide i
Table of Contents
Chapter 1. Introduction .................................................................................... 1-1
Manual Overview ...........................................................................................1-1
How to Use This Manual ............................................................................1-2
Scanner Nomenclature ...................................................................................1-3
Connectors ..............................................................................................1-4
Physical Parameters .......................................................................................1-5
Scanning ................................................................................................ 1-5
AC Adapter .............................................................................................1-5
Electrical Specifications .................................................................................. 1-6
Power Supply ..........................................................................................1-7
Laser and Product Safety ................................................................................1-8
Labeling ..................................................................................................... 1-10
Agency Compliances .................................................................................... 1-12
Bar Codes Supported ................................................................................... 1-13
Chapter 2. Site Preparation and Installation..................................................... 2-1
Unpacking ....................................................................................................2-1
Operational Verification ..................................................................................2-2
Installation: Model 2200VS .............................................................................2-3
Installation: Model 2300HS .............................................................................2-6
Chapter 3. Operation and Maintenance ............................................................. 3-1
Scanning Items: Model 2200VS ....................................................................... 3-2
Scanning Items: Model 2300HS .......................................................................3-3
Operational Controls ......................................................................................3-4
Operational Modes .........................................................................................3-4
Power-Up/Selftest & Pre-Operation ............................................................. 3-4
Operating Mode .......................................................................................3-5
Additional Functions .......................................................................................3-7
Programming ..........................................................................................3-7
Scanner Diagnostic Mode .......................................................................... 3-7
Scanner Reset .........................................................................................3-8
Operational Maintenance ................................................................................3-8
Cleaning .................................................................................................3-8
Chapter 4. Problem Isolation ............................................................................ 4-1
Diagnostic Procedures .................................................................................... 4-2
Error Codes .................................................................................................. 4-3
Flowcharts ....................................................................................................4-4

ii Magellan®2200VS and 2300HS
Chapter 5. Programming .................................................................................. 5-1
Introduction to Label Programming .................................................................. 5-1
Understanding the Basics ............................................................................... 5-1
Integrating the Scanner With Your Host System ................................................ 5-1
Customizing Your Scanner’s Operation ....................................................... 5-2
Programming Overview .................................................................................. 5-3
Programming via Handheld Device ............................................................. 5-4
What Is Programming Mode? .................................................................... 5-4
Entering and Exiting Programming Mode. .................................................... 5-4
Programming Session .............................................................................. 5-5
LED and Beeper Indicators ............................................................................. 5-9
If You Make a Mistake... ................................................................................. 5-9
Return to Factory Settings ........................................................................ 5-9
Test Mode .............................................................................................5-10
General Scanner Features .............................................................................5-11
Double Read Timeout ..............................................................................5-11
Laser Timeout ........................................................................................5-13
Motor Timeout .......................................................................................5-15
Green LED Idle State ..............................................................................5-18
Scanner Button Options ...........................................................................5-19
Power-up Beep Control ............................................................................5-21
Good Read Beep Control ..........................................................................5-23
Good Read Beep Frequency .....................................................................5-24
Good Read Beep Length ..........................................................................5-26
Good Read Beep Volume .........................................................................5-27
Good Read When to Indicate ....................................................................5-30
EAS Active State ....................................................................................5-32
EAS Timeout ..........................................................................................5-33
Aux Port Mode .......................................................................................5-34
Productivity Index Reporting (PIR) ............................................................5-36
Interface Related Features ............................................................................5-37
Interface Type .......................................................................................5-37
Maximum Host-Transmitted Message Length ..............................................5-44
Number of Host Transmission Buffers ........................................................5-45
Global Prefix ..........................................................................................5-46
Global Suffix ..........................................................................................5-48
IBM Features ...............................................................................................5-50
IBM Transmit Labels in Code 39 Format .....................................................5-50
IBM USB Scanner Device Type .................................................................5-51
RS-232 Features ..........................................................................................5-52
RS-232 Baud Rate ..................................................................................5-52
RS-232 Number of Data Bits ....................................................................5-56
RS-232 Number of Stop Bits ....................................................................5-57
RS-232 Parity ........................................................................................5-58
RS-232 Hardware Control ........................................................................5-60
RS-232 Intercharacter Delay ....................................................................5-62
RS-232 Software Flow Control ..................................................................5-63

Product Reference Guide iii
RS-232 Host Echo .................................................................................. 5-64
RS-232 Host Echo Quiet Interval .............................................................. 5-65
RS-232 Ignore Host Commands ............................................................... 5-66
RS-232 TTL ........................................................................................... 5-67
RS-232 TTL Invert ................................................................................. 5-68
RS-232 Beep on ASCII BEL ..................................................................... 5-69
RS-232 Beep on Not on File ..................................................................... 5-70
RS-232 ACK NAK Enable ......................................................................... 5-71
RS-232 ACK Character ............................................................................ 5-73
RS-232 NAK Character ............................................................................ 5-74
RS-232 Retry on ACK NAK Timeout .......................................................... 5-75
RS-232 ACK NAK Timeout Value .............................................................. 5-76
RS-232 ACK NAK Retry Count .................................................................. 5-77
RS-232 ACK NAK Error Handling .............................................................. 5-78
RS-232 Label ID Control ......................................................................... 5-80
Single Cable RS-232 Options ......................................................................... 5-82
Single Cable RS-232 RTS CTS Selection .................................................... 5-83
Single Cable RS-232 Use BCC .................................................................. 5-86
Single Cable RS-232 Use ACK/NAK ........................................................... 5-87
Single Cable RS-232 Use STX .................................................................. 5-88
Set Single Cable RS-232 STX Character .................................................... 5-89
Single Cable RS-232 Use ETX .................................................................. 5-90
Set Single Cable RS-232 ETX Character .................................................... 5-91
Symbology Programming .............................................................................. 5-92
UPC-A Enable .............................................................................................. 5-92
UPC-A Number System Character Transmission .......................................... 5-93
UPC-A Check Character Transmission ....................................................... 5-94
Expand UPC-A to EAN-13 ........................................................................ 5-95
UPC/EAN AIM ID .................................................................................... 5-96
UPC-A Label ID ...................................................................................... 5-97
UPC-A 2-Digit Supplemental Label ID ........................................................ 5-98
UPC-A 5-Digit Supplemental Label ID ........................................................ 5-99
UPC-A 128 Supplemental Label ID .......................................................... 5-100
UPC-E Enable ............................................................................................ 5-101
UPC-E Number System Character Transmission ........................................ 5-102
UPC-E Check Character Transmission ...................................................... 5-103
Expand UPC-E to UPC-A ........................................................................ 5-104
Expand UPC-E to EAN-13 ...................................................................... 5-105
UPC-E Label ID .................................................................................... 5-106
UPC-E 2-Digit Supplemental Label ID ...................................................... 5-107
UPC-E 5-Digit Supplemental Label ID ...................................................... 5-108
UPC-E 128 Supplemental Label ID .......................................................... 5-109
EAN-13 Enable .......................................................................................... 5-110
EAN-13 First Character Transmission ...................................................... 5-111
EAN-13 Check Character Transmission .................................................... 5-112
EAN-13 ISBN Conversion Enable ............................................................ 5-113
EAN 13 Label ID .................................................................................. 5-114

iv Magellan®2200VS and 2300HS
EAN-13 2-Digit Supplemental Label ID ....................................................5-115
EAN-13 5-Digit Supplemental Label ID ....................................................5-116
EAN-13 128 Supplemental Label ID ........................................................5-117
Bookland AIM ID ..................................................................................5-118
Bookland Label ID ................................................................................5-119
EAN-8 Enable ............................................................................................5-120
EAN-8 Check Character Transmission ......................................................5-121
Expand EAN-8 to EAN-13 .......................................................................5-122
EAN 8 Label ID .....................................................................................5-123
EAN-8 2-Digit Supplemental Label ID ......................................................5-124
EAN-8 5-Digit Supplemental Label ID ......................................................5-125
EAN-8 128 Supplemental Label ID ..........................................................5-126
EAN-8 Decoding Levels .......................................................................... 5-127
Other UPC/EAN Options ..............................................................................5-130
UPC/EAN Reconstruction ........................................................................5-131
Price Weight Check ...............................................................................5-132
Enable EAN Two Label ...........................................................................5-135
Addons ...............................................................................................5-136
UPC-A and EAN-13 Decoding Levels ........................................................5-138
GTIN Enable ..............................................................................................5-141
GTIN Label ID ......................................................................................5-142
GTIN 2-Digit Supplemental Label ID ........................................................5-143
GTIN 5-Digit Supplemental Label ID ........................................................5-144
GTIN Code 128 Supplemental Label ID ....................................................5-145
RSS-14 Enable ..........................................................................................5-146
RSS-14 Check Character Transmission ....................................................5-147
RSS-14/EAN-128 Emulation ...................................................................5-148
RSS-14 2D Component Enable ...............................................................5-149
RSS-14 AIM ID .....................................................................................5-150
RSS-14 Label ID ...................................................................................5-151
RSS Expanded Enable .................................................................................5-152
RSS Expanded EAN-128 Emulation ......................................................... 5-153
RSS Expanded 2D Component Enable ...................................................... 5-154
RSS Expanded AIM ID ........................................................................... 5-155
RSS Expanded Label ID .........................................................................5-156
RSS Expanded Length Control ................................................................5-157
RSS Expanded Maximum Label Length ....................................................5-158
RSS Expanded Minimum Label Length ..................................................... 5-159
RSS Expanded Fixed Length 1 ................................................................5-160
RSS Expanded Fixed Length 2 ................................................................5-161
Code 39 Enable ......................................................................................... 5-162
Code 39 Start Stop Character Transmission ............................................. 5-163
Code 39 Check Character Calculation ...................................................... 5-164
Code 39 Check Character Transmission ...................................................5-165
Code 39 Full ASCII ...............................................................................5-166
Code 39 AIM ID ....................................................................................5-167
Code 39 Label ID ..................................................................................5-168

Product Reference Guide v
Code 39 Length Control ........................................................................ 5-169
Code 39 Maximum Label Length ............................................................. 5-170
Code 39 Minimum Label Length ............................................................. 5-171
Code 39 Fixed Length 1 ........................................................................ 5-172
Code 39 Fixed Length 2 ........................................................................ 5-173
Code 39 Stitching ................................................................................ 5-174
Pharmacode 39 Enable ............................................................................... 5-175
Pharmacode 39 Start Stop Character Transmission ................................... 5-176
Pharmacode 39 Check Character Transmission ......................................... 5-177
Pharmacode 39 Label ID ....................................................................... 5-178
Code 128 Enable ....................................................................................... 5-179
Code 128 Transmit Function Characters .................................................. 5-180
Convert Code128 to Code 39 ................................................................. 5-181
Code 128 AIM ID ................................................................................. 5-182
Code 128 Label ID ............................................................................... 5-183
Code 128 Length Control ....................................................................... 5-184
Code 128 Maximum Label Length ........................................................... 5-185
Code 128 Minimum Label Length ............................................................ 5-186
Code 128 Fixed Length 1 ...................................................................... 5-187
Code 128 Fixed Length 2 ...................................................................... 5-188
Code 128 Stitching ............................................................................... 5-189
EAN-128 Enable ........................................................................................ 5-190
EAN 128 AIM ID ................................................................................... 5-191
EAN 128 Label ID ................................................................................. 5-192
Interleaved 2 of 5 (I 2 OF 5) Enable ............................................................. 5-193
I 2 of 5 Check Character Calculation ....................................................... 5-194
I 2 of 5 Check Character Transmission .................................................... 5-195
I 2 of 5 AIM ID .................................................................................... 5-196
I 2 of 5 Label ID .................................................................................. 5-197
I 2 of 5 Length Control ......................................................................... 5-198
I 2 of 5 Maximum Label Length .............................................................. 5-199
I 2 of 5 Minimum Label Length ............................................................... 5-200
I 2 of 5 Fixed Length 1 ......................................................................... 5-201
I 2 of 5 Fixed Length 2 ......................................................................... 5-202
I 2 of 5 Stitching .................................................................................. 5-203
Codabar Enable ......................................................................................... 5-204
Codabar Start Stop Character Transmission ............................................. 5-205
Codabar Start Stop Character Set .......................................................... 5-206
Codabar Start Stop Character Match ....................................................... 5-208
Codabar Check Character Calculation ...................................................... 5-209
Codabar Check Character Transmission ................................................... 5-210
Codabar AIM ID ................................................................................... 5-211
Codabar Label ID ................................................................................. 5-212
Codabar Length Control ........................................................................ 5-213
Codabar Maximum Label Length ............................................................ 5-214
Codabar Minimum Label Length ............................................................. 5-215
Codabar Fixed Length 1 ........................................................................ 5-216

vi Magellan®2200VS and 2300HS
Codabar Fixed Length 2 .........................................................................5-217
Codabar Stitching .................................................................................5-218
Code 93 Enable ......................................................................................... 5-219
Code 93 AIM ID ....................................................................................5-220
Code 93 Label ID ..................................................................................5-221
Code 93 Length Control .........................................................................5-222
Code 93 Maximum Label Length .............................................................5-223
Code 93 Minimum Label Length ..............................................................5-224
Code 93 Fixed Length 1 .........................................................................5-225
Code 93 Fixed Length 2 .........................................................................5-226
Code 93 Stitching .................................................................................5-227
MSI/Plessey Enable ....................................................................................5-228
MSI/Plessey Check Character Calculation .................................................5-229
MSI/Plessey Number of Check Characters ................................................5-230
MSI/Plessey Check Character Transmission ..............................................5-231
MSI/Plessey AIM ID .............................................................................. 5-232
MSI/Plessey Label ID ............................................................................5-233
MSI/Plessey Length Control ...................................................................5-234
MSI/Plessey Maximum Label Length ........................................................5-235
MSI/Plessey Minimum Label Length ........................................................ 5-236
MSI/Plessey Fixed Length 1 ...................................................................5-237
MSI/Plessey Fixed Length 2 ...................................................................5-238
MSI/Plessey Stitching ............................................................................ 5-239
Standard 2 of 5 Enable ............................................................................... 5-240
Standard 2 of 5 Check Character Calculation ............................................5-241
Standard 2 of 5 Check Character Transmission ......................................... 5-242
Standard 2 of 5 AIM ID .........................................................................5-243
Standard 2 of 5 Label ID .......................................................................5-244
Standard 2 of 5 Length Control ...............................................................5-245
Standard 2 of 5 Maximum Label Length ................................................... 5-246
Standard 2 of 5 Minimum Label Length ....................................................5-247
Standard 2 of 5 Fixed Length 1 .............................................................. 5-248
Standard 2 of 5 Fixed Length 2 .............................................................. 5-249
Standard 2 of 5 Stitching ....................................................................... 5-250
Appendix A. LED/Beeper Indications & Controls ................................. A-1
Volume/Tone Push Button ........................................................................ A-2
Green LED Indicator ................................................................................. A-3

Product Reference Guide vii
Appendix B. Cable Information............................................................ B-1
Appendix C. Keypad............................................................................. C-1
Appendix D. Host Commands............................................................... D-1
Appendix E. Factory Defaults............................................................... E-1
Appendix F. Handheld Data Format Requirements............................... F-1
Handheld Data Format Requirements General .............................................. F-1
PSC Handheld Data Format Requirements ................................................... F-2
AIM Formats ......................................................................................... F-10

viii Magellan®2200VS and 2300HS

Manual Overview
Product Reference Guide 1-1
Chapter 1
Introduction
This Product Reference Guide contains comprehensive instructions on
how to install the scanner, how to program it using special programming
feature bar code labels, and advanced user information as described in the
following overview.
Manual Overview
Chapter 1, Introduction, presents the manual’s contents, describes features
and specifications, provides regulatory and safety information, and lists
the bar code symbologies the scanner will read.
Chapter 2, Site Preparation and Installation, supplies physical dimen-
sions for the scanner and its most common accessories, and details counter
preparation and installation. Cable routing, connection and testing are
also explained in this section.
Chapter 3, Operation and Maintenance, describes use and maintenance;
providing details about operator controls, programming and diagnostic
modes. Scanner routine maintenance is outlined in this section as well.
Chapter 4, Problem Isolation, provides an outline of three scanner test
modes: Selftest, Operational Tests and Diagnostic Tests. Descriptions of
the error indications if the scanner detects a system problem and trouble-
shooting flowcharts to aid in problem resolution are also presented.
Chapter 5, Programming, details procedures and provides custom bar-
codes for setting programmable scanner features. This section is organized
by the categories: General Features, Interface Related Features and Sym-
bology Related Features.
Appendix A, LED/Beeper Indications & Controls, lists the various func-
tions and indications of the scanner control panel features.

1-2 Magellan®2200VS and 2300HS
Appendix B, Cable Information, outlines wire requirements, connector
specifications and pinout details for associated product cabling.
Appendix C, Keypad, furnishes bar codes representing the digits and char-
acters required to enter extended programming data needed during certain
programming sessions.
Appendix D, Host Commands, contains a partial listing of available host
commands that can be used with a compatible host interface.
Appendix E, Factory Defaults, is a listing of standard factory defaults for
the various programmable features.
Appendix F, Handheld Data Format Requirements, provides application
notes to describe the general format of data that can be accepted by the
scanner through the auxiliary port as transmitted from a handheld scan-
ner.
How to Use This Manual
You’ll find it helpful to familiarize yourself with the first section of this
manual, since it provides both a general description of the product’s fea-
tures and an overview of the manual’s contents and organization. Refer-
ence the other sections as required for information about scanner
installation, operation, maintenance and bar code programming.

Scanner Nomenclature
Product Reference Guide 1-3
Manual Conventions
Scanner Nomenclature
Controls, indicators and other nomenclature are shown in Figure 1-1.
Figure 1-1. Scanner Nomenclature
‘NOTE’ blocks contain information that is helpful and rec-
ommended. They provide information that is critical to
operations and/or procedures described in this manual.
‘CAUTION’ blocks inform you that proper handling
(adherence to the procedures described) is required to
avoid damage to equipment and/or property.
‘WARNING’ blocks alert you to potential physical harm or
injury. These statements do not include potentially fatal
hazards, which would be designated as ‘DANGER’
blocks. Use of this product does not warrant the need for
a DANGER block.
Speaker
Scan
Window
U
pp
er Sca
n
Win
dow
Lower
S
ca
n
Win
dow
Indicator
LED plus
Volume/Tone
Push Button
Volume/Tone
P
us
h B
u
tt
on
In
d
i
ca
t
o
r LE
D
Model 2200VS
Model 2
300
H
S
To
p
Cove
r

1-4 Magellan®2200VS and 2300HS
Connectors
The appearance of the connector panel will vary depending upon the fac-
tory options purchased with your model. Reference Figure 1-2.
Figure 1-2. Connector Panel
POSTERMINAL AUXILIARY PORT POWER
Connection to this port is Optional
· DC Brick Input· Label Data
· Application Download
(where appropriate)
·Test Port
· On Screen
Programming (OSP)
· Application Download
· RS-232 Handheld Scanner Input
· Auxiliary RS-232 Label Data Output
· EAS interlock
EAS Connection
Connection to this port is Optional
· Electronic Article Surveillance
Connection
Power
EAS Opening
Aux. Port
Scanner Host
Power
Aux. Port
ScannerHost

Physical Parameters
Product Reference Guide 1-5
Physical Parameters
This section provides specifications for performance, environmental and
electrical parameters. Reference the second section of this manual, Site
Preparation and Installation, for physical measurements of all models and
some accessories.
Scanning
The scanner has a scan zone immediately in front of (or above) the scan
window where the scanner projects laser light in order to scan items. Scan
lines form a zone where bar code labels are read. Refer to the Operation
and Maintenance section of this manual for more details about the topic:
Scanning Items: Model 2200VS.
AC Adapter
Figure 1-3 is an illustration of the AC/DC Adapter (part number 4004-
0705, 4004-0706, 4004-0707, 4004-0708, 4004-0709, 4004-0710).
Figure 1-3. AC/DC Adapter

1-6 Magellan®2200VS and 2300HS
Figure 1-4. Environmental Specifications
Electrical Specifications
Before installation, always verify that the site’s electrical service meets the
scanner’s requirements. The scanner has been engineered for compatibility
with most international electrical systems. Verify that the power source
will supply “clean” electrical power to the equipment; that is, it must be
free of excess electrical noise.
If the adapter will not plug into your AC power receptacle, the model
shipped is not compatible with your electrical system. Please contact your
distributor immediately to receive the necessary information and compo-
nents to ensure electrical compatibility.
Operation
Storage
+40 C +104 F
10 C 50 F
Temperature
10 to +40 C
50 to +104 F Dust Resistant
Optics Cavity, IP5X
+70 C +158 F
-40 C -40 F
Temperature
-40 to +70 C
-40 to +158 F
Illumination
Artificial Light:
450 Foot-candles Sunlight:
0-8,000 Foot-candles
POS Scanner
Humidity
5 - 95% NC

Electrical Specifications
Product Reference Guide 1-7
Power Supply
The scanner utilizes the following power supply models.
VOLTAGE PART NUMBER
120V US 4004-0705
230V UK 4004-0706
240V SAA 4004-0707
100V MITI 4004-0708
230V EURO 4004-0709
120V Desktop US 4004-0710
CAUTION
Safe operation of your scanner or scanner requires properly grounded elec-
trical outlets. Be sure to have a qualified electrician certify the earth-ground
connection on circuits which will be used to power the unit.
NOTE
The scanner is powered on/off by connecting/disconnecting its AC power
supply.

1-8 Magellan®2200VS and 2300HS
Laser and Product Safety
Laser safety requirements are based on IEC Standard Publication 60825-1
(2001) and CDRH 21CFR, Chapter 1, Subchapter J and (CDRH) Laser
Product Performance Standard, User information [1040.10(h)1]:
• User Maintenance. No user maintenance of the system other than
cleaning of the scan window(s) is required.
• Radiant Energy. The scanner is an IEC Class 1 and CDRH IIa laser
product. The system uses two embedded Class 3R Visible Laser
Diodes (VLDs) operating at 650.0 or 670.0 nm, in an opto-
mechanical scanner, resulting in less than 3.9µW radiated power as
observed through a 7mm aperture and averaged over 10 seconds.
Maximum emitted peak output power at the window is 760µW. No
attempt should be made by the user to remove the protective hous-
ing of the scanner.
• Laser Light Viewing. The scan window is the only aperture through
which laser light may be observed in this product.
Exposure to the light emitted from the scan window(s) has been shown
not to be harmful. The safety record of bar code scanning is perfect after
millions of hours of use worldwide. This safe and efficient use of laser
technology has gained wide acceptance in industries throughout the
world.
Operators and installers of the unit should observe the following cautions
and warnings:
CAUTION
Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
The use of optical instruments with the scanner will increase eye hazard.
(Optical instruments include binoculars, microscopes, telescopes and magni-
fying glasses. This does not include eyeglasses worn by the user).
To prevent exposure to laser light, do not remove the protective housing of the
scanner. There are no user-serviceable parts inside the unit.

Laser and Product Safety
Product Reference Guide 1-9
Safety precautions to be taken:
This Class B digital apparatus complies with Canadian ICES-0003.
Cet appareil numérique de la Classe B est confireme à la norme NMB-
0003 du Canada.
CAUTION
No adjustments or alteration of the scanner housing are to be attempted by the
user.
The failure of the facet wheel motor while the unit is continuing to emit a laser
beam causes the emission levels to exceed those for inherently safe operation.
The unit has safeguards to prevent this occurrence. If, however, a stationary
laser beam is ever emitted, the failing unit should be disconnected from its
power supply until repaired by a qualified technician.
WARNING
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be
required to correct the interference at his or her own expense.

1-10 Magellan®2200VS and 2300HS
Labeling
Regulatory, reference and safety labeling for both models is shown in
Figure 1-5 and Figure 1-6.
Figure 1-5. Labeling: Model 2200VS
IEC CLASS 1 LASER PRODUCT
Class IIa Laser Product. Avoid long term viewing of direct
laser light. Appareil á laser de classe IIa. Eviter toute
exposition prolongée de la vue à lumière laser directe.
6-1018
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Output:
+5V
+12V
Use ONLY PSC INC. AC/DC Power Supply
Input: 50 - 60 Hz (0.5 - 0.25A)
100 - 240VAC (P/N 8-0582)
Power: 18 Watts (max)
THIS LASER PRODUCT COMPLIES WITH 21CFR 1040 AS APPLICABLE AS A CLASS IIA PRODUCT
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe A est confirme à la norme NMB-003 du Canada.
N263
NRTL
Safety
tested
Production
monitored
PRODUCTSERVICE
Product of USA
U S
PSC Inc.
959 Terry Street
Eugene, OR 97402 USA
XXXXXXXXXXXX
CAUTION - CLASS 3R LASER RADIATION WHEN OPEN.
AVOID DIRECT EYE EXPOSURE.
6-1012
COVERED BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 4,709,195
4,709,369 4,712,853 4,749,879 4,786,798 4,792,666 4,798,943 4,799,164
4,816,660 4,861,972 4,861,973 4,866,257 4,868,836 4,879,456 4,963,719
4,991,692 5,144,118 5,179,270 5,198,649 5,247,162 5,229,588 5,410,108
5,459,308 5,440,110 5,475,207 5,493,108 5,705,802 5,723,852 5,834,708
This illustration shows general label
shape/content ONLY. For actual
regulatory, patent and other
information, view the labels on the
product, or contact your nearest
sales or service office.
Host Aux
Scanner Host PowerAux. Port
EAS Opening