Pulsar W866 User manual

CAL. W866
DIGITAL QUARTZ
ENGLISH
lFull-panel dot-matrix liquid crystal panel
lTime/calendar
lStopwatch with data recall function
lCountdown timer
l3-channel regular alarm
lWorld time
lAuto light function

2
English
MODE CHANGE
B
A
D
C
E
With each press, the mode changes in the following order.
A
TIME
MODE
STOPWATCH
(CHRONO)
MODE
DATARECALL
MODE
TIMER
MODE
ALARM
MODE
WORLD TIME
MODE

3
English
AUTO LIGHT FUNCTION
Keep holding down for 2 seconds to activate the auto light function.
ILLUMINATING LIGHT
Auto light mark
Press to turn the backlight on.
lThe auto light function allows you to turn the illuminating light on by
pressing any button.
The auto light mark appears on display to
indicate the auto light function is turned
on.
D
D
D

4
English
TIME MODE (TIME)
Press until the watch enters the TIME mode.
“TIME” is shown, and the watch shows the
TIME display.
A
B
Keep holding down for 4 seconds to select a desired display.
In the TIME mode, you can choose the display format from three options .
B B B
A

5
English
CHECKING THE HOME CITY
Press to show the home city.
The home city currently set is shown.
E
Home city
Press to turn the key sound and the
hourly time signal on or off.
C
Key sound/hourly time signal mark
KEY SOUND/HOURLY TIME SIGNAL SETTING
C
E
The Sound Demo (melody of Alarm_1) can be heard by pressing
and holding buttons C and E at the same time.

6
English
TIME/CALENDAR SETTING
Press for 2 seconds to show the TIME/CALENDAR SETTING
display.
Press to increase the digits (+) or move forward.
Press to decrease the digits (-) or move backward.
or Keep holding down each button to fast-forward or rewind quickly.
Press to select the item to be adjusted.
B
C
E
A
Refer to the SEQUENCE OF THE ITEM SETTINGS on the next
page.
B
Press for more than 1 second to conrm the settings and return to
the TIME mode.
If the watch is left untouched in the TIME/CALENDAR SETTING
display, it will automatically return to the TIME mode in 2 to 3
minutes.

7
English
Home city DST Second Minute Hour
Date
Month
Year
Calendar format
Time format
Language
Eco mode
A
A
A
A
A
A
A
A
A
A
A
A
*1*2
*3
*4
SEQUENCE OF THE ITEM SETTINGS
Press the button
A
to move on to the next item.

8
English
NOTES ON SETTINGS
• The calendar automatically adjusts for odd and even months including
February of leap years up to 2066.
• Once the year, month and date have been set, the day of the week is
automatically set.
*1 Calendar format
Choose from "Date-Month-Year", "Month-Date-Year" or "Year-Month-
Date". The default setting is "Date-Month-Year".
*2 Time format
Select either 12-hour indication format or 24-hour indication format. The
default setting is 12-hour indication format
*3 Language
Choose from English (ENG), French (FRA), Spanish (SPA) or German (GER).
The day of the week is displayed in the selected language. The default
setting is English.
*4 ECO mode
Select the transition time to the eco mode among OFF, 1, 3, 6 and 12
hours. When the selected transition time passes without any button
operation, the watch automatically enters the eco mode. The default
setting is OFF.

9
English
STOPWATCH MODE (CHRONO)
lThe stopwatch measures up to 9 hours, 59 minutes and 59.99 seconds
in 1/100 second increments.
Press until the watch enters the STOPWATCH mode.
Start/Stop/Restart
C
E
Measure lap/Reset
A
A
“CHR” is shown, and the watch shows the STOPWATCH display.
Current time
After 9 hours, 59 minutes and 59.99 seconds have been measured,
the stopwatch will automatically stop and be reset and the measured
data will be stored.

10
English
STOPWATCH OPERATION
Press to start the stopwatch.
Press to take a lap time.
Lap number
Lap time
LAP 2
Press to stop the stopwatch.
Stopwatch mark
While the stopwatch is measuring,
the stopwatch mark is flashing.
LAP 1
Press to reset the stopwatch.
Up to 100 lap times can be taken. If the button E
is pressed after 100 lap times are taken, "FULL"
appears on the display and no more lap times will
be recorded.
C
E
E
E
C
C
E
When a new measurement is commenced, the lap time data obtained
from the previous measurement will be automatically deleted.
s
LAP 100

11
English
l The rst 100 lap times are automatically stored in memory.
DATA RECALL MODE (DATA)
Press until the watch enters the DATA RECALL mode.
Press to view the contents of the data in the order shown in
the illustration on the next page.
or
A
A
CE
C
E
“DATA” is shown, and the watch enters the DATA RECALL display.

12
English
Total Lap data 1 Last lap
Best lap
Average
The display changes
every second.
C
E
C
C
C
C
C
E
E
E
E
E

13
English
Keep holding down to delete the data.
Keep holding down again for 2 seconds
to conrm the deletion of all the data.
HOW TO DELETE THE DATA
If there is no data, "----" will be
displayed.
B
B
B
B

14
English
TIMER MODE
lThe timer can be set from 10 seconds up to 9 hours 59 minutes 59
seconds in one-second increments.
Press until the watch enters the TIMER mode.
"TMR" is shown, and the watch shows the TIMER display.
Start/Stop
Reset
A
A
C
E

15
English
TIMER SETTING
Press for 2 seconds to show the TIMER SETTING display.
The second digits start ashing.
s
or
s
Press to select the item to be adjusted.
Second Minute Hour
Press to conrm the settings and return to the TIMER mode.
If the watch is left untouched in the TIMER SETTING display, it
will automatically return to the TIMER mode in 2 to 3 minutes.
B
C
E
Press to increase the digits (+) or move forward.
Press to decrease the digits (-) or move backward.
Keep holding down each button to fast-forward or rewind quickly.
A
AA
A
B

16
English
TIMER OPERATION
Start/Stop
Reset
Timer mark
Press to start the timer.
Press to reset the timer.
s
C
Press to stop the timer.
C
E
C
E
While the timer is counting,
the timer mark appears.
The warning sound starts to beep from 3 seconds before the set time
is up. When the time is up, the timer beeps for 5 seconds. To stop
the beep manually while sounding, press any of the buttons.

17
English
ALARM MODE
Press until the watch enters the ALARM mode.
l
The three-channel daily alarm sounds at a designated time every 24
hours. Each alarm channel can be engaged or disengaged independently.
A
"ALM" is shown, and the watch shows the ALARM display.
A
E
Press to select an alarm channel.
EEE
Alarm channel

18
English
ALARM TIME SETTING
Press for 2 seconds to show the ALARM SETTING display.
The hour display starts ashing.
“ON” and the alarm mark appear and the alarm is automatically
engaged.
If the watch is left untouched in the ALARM SETTING display, it
will automatically return to the ALARM mode in 2 to 3 minutes.
B
or
s
Press to select the item to be adjusted.
Hour Minute
Press to conrm the settings and return to the ALARM mode.
C
E
Press to increase the digits (+) or move forward.
Press to decrease the digits (-) or move backward.
Keep holding down each button to fast-forward or rewind quickly.
A
A
B
s

19
English
ALARM ENGAGEMENT/DISENGAGEMENT
Press to select an alarm channel.
s
With each press, the alarm is engaged and disengaged alternately.
When the alarm is engaged, the alarm mark appears on display.
E
C
C
Alarm mark
Each alarm has a different sound. To test the alarm sound, press the
button C for 2 seconds or more.
ALARM SOUND PREVIEW

20
English
WORLD TIME MODE
lThe time of 44 cities in different time zones throughout the world can be
displayed.
l Daylight saving time can also be set (except for GMT).
Press until the watch enters the WORLD TIME mode.
Date Current time in
home city
B
Press to select a desired display either with date or with current time
in home city.
A
B