purchase green Power Trim PG-PT-POWERBRUSH User manual

Purchase Green + Power Trim 1 PG-PT-POWERBRUSH

Purchase Green + Power Trim 2 PG-PT-POWERBRUSH
Always read and make sure you understand both instruction
manuals before using your Power Trim Power Brush for the
first time and keep them in a safe place for future reference.
󱛻󱛼󱛽WARNING there is a risk of an accident or personal
injury or serious damage to property.
NOTICE caution where there is a risk of damaging
the machine or its individual components.
Power Trim’s philosophy is to continually improve all its products. For this reason,
we may modify the design, engineering, and appearance of our products
periodically. Therefore, some changes, modifications, and improvements may not
be covered in this manual.

Purchase Green + Power Trim 3 PG-PT-POWERBRUSH
Power Trim Gas Engine Power Brush ..............................................................................1
Power Trim Engineering Improvements ......................................................................2
Table of Contents...............................................................................................................3
Safety Precautions and Working Techniques..................................................................4
Clothing and Equipment....................................................................................................5
Transporting the machine................................................................................................. 6
Refueling .............................................................................................................................6
Holding and Controlling the Power Brush.......................................................................6
While Working ....................................................................................................................7
Vibrations............................................................................................................................8
Maintenance and Repairs .................................................................................................9
Operating Instructions.....................................................................................................10
Starting ..........................................................................................................................10
Operating ......................................................................................................................10
Service and Maintenance ................................................................................................11
Air Filter Maintenance..................................................................................................11
Cleaning the Air Filter...................................................................................................11
Power Trim Manufacturer Limited Warranty................................................................12

Purchase Green + Power Trim 4 PG-PT-POWERBRUSH
•Special safety precautions must be observed when operating your Power
Trim Power Brush.
•Always read and make sure you understand both user manuals (Engine and
Power Brush) before using your Power Brush for the first time and keep
them in a safe place for future reference.
•Non-compliance with the manuals may cause serious or even fatal injury.
•Observe all applicable local safety regulations, e.g., by employers’ liability
insurance associations, occupational safety authorities, etc.
•If you have never used a Power Brush before: Have your dealer or other
experienced user show you how to operate your machine –or attend a
special course to learn how to operate it.
•Minors should never be allowed to use the motorized device –except for
apprentices over the age of 16 when working under supervision.
•Children, animals, and onlookers must remain at a safe distance.
•When not using the machine, it must be laid down in such a way that it does
not endanger anyone. Ensure that the machine cannot be used without
authorization.
•The user is responsible for accidents or risks involving third parties or their
property.
•Lend or rent your Power Brush only to people who are familiar with this
model and its operation –do not lend or rent your Power Trim without the
Engine and Power Brush user manuals.
•The use of noise-emitting power tools may be restricted to certain times by
national or local regulations.
•Anyone operating the Power Brush must be well rested, in good physical
health and in a good state of mind.
•If you have any condition that might be aggravated by strenuous work, check
with your doctor before operating the machine.
•Persons with pacemakers only: The ignition system of your Power Trim
produces an electromagnetic field of very low intensity. This field may
interfere with some pacemakers. Power Trim & Co. recommends that people
with pacemakers consult their physician and the pacemaker manufacturer to
minimize any health risk.
•Anyone who has consumed alcohol, medications or drugs that impair their
ability to react must not operate the Power Brush.

Purchase Green + Power Trim 5 PG-PT-POWERBRUSH
•Use your Power Brush only for the applications described in the user manual
of the Power Trim you are using.
•The machine must not be used for any other purpose.
•Do not operate the Power Trim without a properly mounted Brush since this
may result in damage to the machine.
•Only use Power Trim and Power Bristle Brush Attachment explicitly approved
for this Power Brush by Purchase Green & Power Trim.
•It is important that you use only high-quality parts and accessories to avoid
the risk of accidents and damage to the machine.
•Purchase Green recommends the use of genuine Power Trim tools and
accessories. They are specifically designed to match this product and meet
your performance requirements.
•Never attempt to modify your Power Brush in any way since this may
increase the risk of personal injury. Purchase Green excludes all liability for
personal injury and damage to property caused while using unauthorized
attachments.
•Do not use a high-pressure washer to clean the Power Brush. The solid jet of
water may damage parts of the unit.
•Wear proper protective clothing and equipment.
•Do not wear clothing that could become trapped in wood, brush or moving
parts of the machine.
•Do not wear a scarf, necktie, or jewelry.
•Tie up and secure long hair above your shoulders.
•Wear steel-toed safety boots with non-slip soles.
•To reduce the risk of eye injuries, wear close-fitting safety. Make sure the
safety glasses are a snug fit.
•Wear “personal” sound protection, e.g., ear defenders.
•Wear face protection and make sure it is a good fit. Face protection alone is
not sufficient to protect the eyes.

Purchase Green + Power Trim 6 PG-PT-POWERBRUSH
Always stop the engine.
Transport the machine by the handle or loop handle, working tool facing forward.
Never touch hot parts –risk of burns!
The Power Trim can turn over or move while being transported and may cause
injuries or property may be damaged. Secure the Power Trim with lashing straps or
a net to prevent it from turning over and moving. Allow the Power Trim to cool
down before transporting it by vehicle. Position the Power Trim so that no fuel can
escape.
Gasoline is highly flammable –keep away from fire or flame –do not spill any fuel –
no smoking. Always shut off the engine before refueling.
Do not fuel a hot engine –fuel may spill and cause a fire.
Open the fuel cap carefully to allow any pressure build-up in the tank to release
slowly and to pre‐vent fuel spraying out.
Only refuel the machine in a well-ventilated place. If fuel has been spilled,
immediately clean the machine –do not allow your clothes to be splashed with fuel.
If that happens, change your clothes immediately. After fueling, tighten down the
fuel cap as securely as possible. This helps reduce the risk of engine vibrations
causing an incorrectly tightened fuel cap to loosen or come off and spill fuel.
Check for fuel leakage! Never start the engine if fuel has spilled or is leaking –fatal
burns may result!
•Make sure you always have a firm and secure footing.
•Always hold the unit firmly with both hands on the handles.
•Right hand on control handle, left hand on grip on handlebar.

Purchase Green + Power Trim 7 PG-PT-POWERBRUSH
•In the event of impending danger or in an emergency, switch off the engine
immediately by pressing the stop switch.
•To reduce the risk of injury from contact with the Power Trim and ejected
objects, do not allow any other persons within a radius of 5 meters of your
own position. This distance must also be maintained in relation to objects
(vehicles, windowpanes) –risk of property damage!
•The correct engine idle speed is important to ensure that the Power Trim
stops moving when you let go of the throttle trigger. If the working tool
continues to move when the engine is idling, have your dealer check the
machine and make proper adjustments or repairs. Check and correct the idle
speed setting at regular intervals. Purchase Green recommends you have
this work done by a Honda servicing dealer.
•Do not operate your Power Trim in the starting throttle position –engine
speed cannot be controlled in this position.
•Be particularly alert and cautious when wearing ear protection because your
ability to hear warnings (shouts, alarms, etc.) is impaired.
•Take breaks when you start getting tired or feeling fatigued.
•Work calmly and carefully –in daylight conditions and only when visibility is
good. Proceed with caution, and do not put others in danger.
•Use your Power Brush only for safe applications.
•As soon as the engine starts running, the Power Brush engine generates
toxic exhaust gas. These gases may be odorless and invisible and may
contain unburned hydrocarbons and benzene. Never run the engine indoors
or in poorly ventilated locations, even if your model is equipped with a
catalytic converter.
To reduce the risk of serious or fatal injury from breathing toxic fumes, ensure
proper ventilation when working in trenches, hollows, or other con‐fined locations.
•Stop work immediately if you start suffering from nausea, headaches,
impaired vision (e.g., your field of vision gets smaller), impaired hearing,
dizziness, or impaired concentration –these symptoms may be the result of
too-high exhaust gas concentration.
•Operate your Power Trim in such a way that it produces a minimum of noise
and emissions –do not run the engine unnecessarily, accelerate the engine
only when working.

Purchase Green + Power Trim 8 PG-PT-POWERBRUSH
•To reduce the risk of fire, do not smoke while operating or standing near
your Power Trim. Combustible fuel vapor may escape from the fuel system.
•Dust, fumes, and smoke produced while working may be hazardous to
health. Wear respiratory protection in case of heavy dust or smoke emission.
Never touch hot parts –risk of burns!
Keep your hands and feet away from the Power Trim. To reduce the risk of injury,
never touch a rotating tool. Always stand behind the deflector or to one side of the
machine during operation –never in front of the rotating tools.
If your Power Trim is subjected to unusually high loads for which it was not
designed (e.g., heavy impact or a fall), always check that it is in good condition
before continuing work.
“Before Starting.” Check that the fuel system has no leaks, and the safety
equipment is fully operative. Never use a Power Trim that is no longer safe to
operate. In case of doubt, contact a dealer.
To reduce the risk of injury, shut off the engine before changing the attachment.
After finishing work or before leaving the Power Trim unattended: Shut off the
engine.
Prolonged use of the Power Brush may result in vibration-induced circulation
problems in the hands (Raynaud's disease).
No general recommendation can be given for the length of usage because it
depends on several factors. The period of usage is prolonged by:
•Hand protection (wearing warm gloves)
•Work breaks
The period of usage is shortened by:
•Any personal tendency to suffer from poor circulation (symptoms: frequently
cold fingers, tingling sensations).
•Low outside temperatures.
•The force with which the handles are held (a tight grip restricts circulation).

Purchase Green + Power Trim 9 PG-PT-POWERBRUSH
Continual and regular users should monitor closely the condition of their hands
and fingers. If any of the above symptoms appear (e.g., tingling sensation in
fingers), seek medical advice.
•Service the machine regularly. Do not attempt any maintenance or repair
work not described in the Power Trim and Engine instruction manual. Have
all other work performed by a servicing dealer.
•Purchase Green recommends that you have servicing and repair work
carried out exclusively by an authorized Honda and Power Trim servicing
dealer. Honda and Power Trim Dealers are trained and are supplied with the
necessary technical information.
•Only use high-quality replacement parts to avoid accidents and damage to
the machine. If you have any questions in this respect, consult a servicing
dealer.
•Purchase Green recommends the use of genuine Power Trim replacement
parts. These parts are specifically designed to match your machine model
and meet your performance requirements.
•To reduce the risk of injury from unintentional engine startup, always shut
off the engine and disconnect the spark plug boot before performing any
repairs, maintenance, or cleaning work.
Exception: Carburetor and idle speed adjustments.
•Do not turn the engine over on the starter with the spark plug boot or spark
plug removed since there is otherwise a risk of fire from uncontained
sparking.
•To reduce the risk of fire, do not service or store your machine near open
flames.
•Check the fuel filler cap for leaks at regular intervals.
•Use only a spark plug of the type approved by Honda and make sure it is in
good condition.
•Inspect the ignition lead (insulation in good condition, secure connection).
•Check the condition of the muffler.
•To reduce the risk of fire and damage to hearing, do not operate your
machine if the muffler is damaged or missing.
•Do not touch a hot muffler since burn injury will result.

Purchase Green + Power Trim 10 PG-PT-POWERBRUSH
1. The Honda GX35 engine is inclinable, which means it can be stored and
operated in any direction. BEFORE STARTING, the driver needs to be in the
horizontal position for 5 minutes.
2. Before starting the post driver, press the transparent, semi-circle fuel bubble
repeatedly until the carburetor is filled with fuel. If the engine is cool, place
the choke lever to the "on" position.
3. Place one hand on the top engine cover with slight downward pressure. With
your other hand, pull the starter rope about 20" quickly.
4. After the engine has started, place the choke lever completely to the "off"
position. AFTER IDLING FOR 5 MINUTES, start normal work.
5. While the post driver is running, don’t pull the starter rope. The high-speed
rotating parts may damage the starter.
1. After the engine is started, ALLOW IT TO IDLE FOR 5 MINUTES BEFORE USE.
2. For a brand-new driver, ONLY PERFORM LOW TO MEDIUM-SPEED WORK FOR
THE FIRST 24 HOURS OF USE to break in the engine and prolong the life of
the machine.
3. For a brand-new driver, it may take 2 to 3 minutes of post driving for the
machine to begin running at a normal performance level.
4. Do not operate the driver at a high speed when you are not brushing