
01
PURE-PRO PERFECT WATER SERIES
18
PURE-PRO PERFECT WATER SERIES
PRO
P
URE
DRINKING WATE R SYSTEM
PRO
P
URE
DRINKING WATE R SYSTEM
About Perfect Water
¨Features
Four levels ofalkaline water.
Two levelsof acid water, including super-oxide.
Filter water (non-ionized)- by ReverseOsmosis WaterSystem
Stainless steel outputspout
Built-in auto-flushing electrode.
Unique post-operation automaticand silent cleansingfor extended lifespan
Voice confirmationevery time youselect a different pH level
Filter change requiredindicator
Easy 1-minute changefilter compartment
Optional ability toconnect direct toplumbing and operateunder mains pressure
3.2 Gallons NSFStandards WaterStorage Tank.
FDAApproved Polypropylene MadeFlat Cap Housing.
Automatic Shut-off Valve, Mini Flow Restrictor, Stainless SteelCheck Valve.
Special & BeautifulWater Ionizerfaucet
Feed water connector, drain saddlevalve.
Four Color Coded1/4 inch Tubing forSystem Connection
Completely Assembled
100% Factory Testedand Sterilized Readyfor Installation.
Installation Instruction.
¨PurePro Perfect Water Series ( RO + Water Ionizer )
More and morepeople understand thatthe "perfect water"system would combine
the purity ofReverse Osmosis (R/O)and the tremendousbenefits provided by
alkaline, ionized water. Historically thishas not beeneasily achieved fora variety
of reasons. Ourwater technology expertsat PurePro havesolved the problemof
combining these twophenomenal yet verydifferent water technologies. Now you
can have perfectlyclean ANDperfectly healthy waterby installing ROsystem with
water ionizer!
Model: EC106-Alkaline
Membrane: 100 GPD/ 378 LPDNanofiltration
Operation pressure: 50- 100 PSI
Dimensions: (cm) 37(L) x 20(W) x 45(H) - System
(cm) 28 (L)x 28 (W)x 35 (H)-Tank
Weight: 8 kg - system
4 kg -tank
¨Specifications: (Reverse Osmosis)
FAQ
Q: What is the guaranteeon the PurePro system ?
The PurePro system (excluding filters) is guaranteed for 1 year for material and
workmanship. All defective parts will be replaced free within the first year under
natural breakdown. The membrane has one year pro-rated guarantee.
Q: What factors affect thequantity and the quality of the water production?
There are four major variablesto consider:
1.Pressure-The greater the water pressure, the better water quantity and
quality it produced. Water pressure of 60 PSI is ideal.
00
2.Temperature-76 F is the ideal water temperature for R.O. 40 F water will
0
cause the production of R.O. water to fall to half of that at 76 F. The maximum
0
water temperature recommended is 85 F.
3.Total Dissolved Solids (TDS)-The higher the amount of dissolved
contaminants in the water, the lower the quantity of water produced. A high
level of TOTAL DISSOLVED SOLIDS can be overcome with additional water
pressure.
4.Membrane-Different membranes have different characteristics. Some
produce more water than others; some have better contaminant rejection
capabilities; some have greater resistance to chemical abrasion for longer life.
PurePro system includes NF33-1812-100 The Thin Film Composite (TFC)
membranes combine the best of these characteristics and are considered the
finest membrane in the world.
Q: What is the maintenanceschedule for the PurePro system ?
The three pre-filter cartridges should be changed every 6 months. The 5 micron
sediment cartridge filter is the first one; the second is a carbon cartridge filter,
and the third one is a 1 micron sediment filters. (some systems comes with the
Extruded carbon filter.) Failure to change the cartridge every 6 months may
cause chlorine to destroy themembrane.
Q: What does the PureProseries drinking water taste like?
The taste of the PurePro water depends on the amount of contaminants in the
tap water originally. If 95% of dissolved minerals and chemicals are removed,
the R.O. water may taste like distilled water (no minerals), bottled water (low
mineral), or natural spring water(moderate mineral content).