PURE EVOKE Flow User manual

Evoke Flow

1
ES
EN
ES
NL
IT
DA/NO
FR
DE
Thank you for choosing Evoke Flow. This wireless music and radio
system brings a world of listening simply and easily within your
reach. You can use it to enjoy music streamed wirelessly from your
PC or Mac; to listen to any Internet, digital or FM radio station; and
to play thousands of podcasts, on‑demand radio programmes and
evocative ambient sounds. This manual will get you up and running
in no time, and explains how to make the most of your Evoke Flow.
We’re constantly improving and adding new features to our products.
To take advantage of any enhancements made since your product
was shipped, please visit our support site support.pure.com where
you can download the latest version of this user guide in PDF format.
Evoke Flow

2
Important safety instructions
1. Read these instructions – All the safety and operating instructions should be read before this product is
operated.
2. Keep these instructions – The safety and operating instructions should be retained for future reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow all instructions – All operating and use instructions should be followed.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, stoves, or other apparatus that produce heat.
9. Only use attachments and accessories specified by the manufacturer.
10. Unplug the apparatus during lightning storms or when unused for long periods of time.
11. Do not use the mains adapter outdoors.
12. Be aware of volume levels when using headphones, excessive volume can damage your hearing.
13. Cease use immediately if apparatus exhibits any signs of mechanical damage, excessive temperature,
swelling or splitting.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power‑supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. To reduce the risk of electric shock, do not remove cover (or back) as there are no user‑serviceable parts
inside. Refer servicing to qualified personnel.
16. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or
plug is damaged, or the apparatus does not operate normally, or has been dropped.
17. Use only power supplies included with the product.
18. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as
vases, shall not be placed on apparatus.
19. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
20. WARNING: The direct plug‑in adapter is used as disconnect device, the disconnect device shall remain
readily operable.
21. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a
way that it does not require a safety connection to electrical earth.
Damage to hearing can occur with consistent exposure to high volume when using headphones. Always
check the volume level before inserting headphones into your ears.
Use of headphones while operating a vehicle is not recommended and is illegal in some areas. Stop
listening to your radio if you find it distracting while operating any type of vehicle or performing any other
activity that requires your full attention.

3
EN
Contents
4 Getting started
4 Quick start
5 Controls and sensors
6 Rear panel
7 Screen icons
8 Internet listening via Pure
Connect
8 Listening to Internet radio
9 Pure Connect tagging service
10 Streaming audio from a PC
or Mac
10 Listening to streamed tracks on Evoke
Flow
11 Listening to digital or FM
radio
11 Changing digital stations
11 Searching for digital stations
11 Changing FM stations
11 Storing a preset
11 Listening to a preset
12 Setting alarms and timers
12 Setting an alarm
12 Setting the sleep timer
12 Setting the kitchen timer
12 Cancelling a sounding alarm or timer
12 Snoozing a sounding alarm
12 Changing the alarm snooze time
12 Cancelling a snoozing alarm
13 Options and settings
13 Pure Connect settings
13 Autotune
13 FM settings
13 Media player settings
14 Display options
14 Changing the radio name
15 Network settings
16 Changing the language shown on the
display
16 Binding the remote
16 Upgrading Evoke Flow
17 Using an optional ChargePAK
18 Help and advice
19 Specifications

4
Extend the aerial and insert the connector of the supplied power adapter into the 5.5V DC
input on the rear of Evoke Flow. Plug the adapter into the power supply. Pure is displayed
briefly on‑screen.
Getting started
Quick start
Note: If you have a ChargePAK E1 rechargeable battery (sold separately) fit it now before plugging in Evoke
Flow. See page 17 for more information.
Choose your display language (English, French, German or Italian) by turning the Select dial
to highlight the language you want. Push the Select dial in to confirm your choice. Repeat this
process to select the time zone and region closest to you.
The audio source screen is displayed, showing the following options. Turn the Select dial to
highlight and press to select from:
Digital radio See page 11
Pure Connect See page 8
Media player See page 10
FM radio See page 11
Auxiliary input See page 6
1
2
3
StereoOut
Aerial
AuxInAuxSpeaker 6VDC
StereoOut AuxInAuxSpeaker 6VDC
6V DC
A
B

5
EN
Controls and sensors
1
2
4
5
3
No. Control Description
1 Context‑sensitive
touch buttons
Tap the button that corresponds to the function shown on screen that you
want to use.
2Back ( )Tap to display the Source menu then choose between Pure Connect, Media
player, FM radio and Auxiliary input. Tap when browsing stations to go back to
the previous list. Tap in the Options menu to go back to the previous screen.
3
Volume/mute dial Turn to adjust volume. Push to mute and un‑mute.
4 Select dial Turn to navigate menus, stations or options and push to select an item. Push to
pause a media track or podcast.
5 Standby touch
key
Tap followed by OK to switch Evoke Flow on; do this again to switch Evoke
Flow into standby (or off if powered by a ChargePAK E1).
6 SnoozeHandle Tap to snooze the alarm for 9 minutes. Grip and hold to brighten the display to
maximum brightness for 3 seconds. (Does not work when Evoke Flow is powered
by a ChargePAK E1.)
7 Light sensor Adjusts the display brightness according to the light levels in your room (only
works when brightness level is set to ‘Automatic’).
7
6

6
Rear panel
8
1. USB connector (mini A to mini‑B type) for upgrading Evoke Flow’s software when a wireless internet
connection is not available.
2. Output connector for the S1 auxiliary speaker.
3. Output connection for headphones (3.5mm).
4. Output connection to an external amplifier using a suitable 3.5mm‑to‑RCA cable (not supplied).
5. 3.5mm auxiliary input connection for an iPod, MP3 player, etc.
6. 6VDC input connection for supplied mains adapter.
7. Acoustically tuned bass reflex port (do not cover).
8. Compartment for ChargePAK E1 rechargeable battery (sold separately).
1 2 3 4 5 6
7
Stereo Out
Aerial
Aux InAux Speaker
Aerial
4000696
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Conforms to UL
Std. 60065
Certified to CSA Std.
C22.2 No. 60065
FCC ID: X280050
IC: 8864A-0050
Evoke
Flow

7
EN
*ChargePAK E1 sold separately.
Screen icons
Buzz FM
Live from The Hive!
Key 1 Key 3Key 2
Source Icons
Source Icons
DR
Digital radio Volume level
PC
Pure Connect Mute
MP Media player Alarm/timer set indicators
FM
FM Clock
AUX
Auxiliary input ChargePAK battery level*
Stereo signal
Signal strength (Digital, FM or Wi‑Fi)

8
Internet listening via Pure Connect
Pure Connect is an online media portal that provides you with quick and easy access to thousands of
internet radio stations, on‑demand programmes, podcasts and ambient sounds. You can enjoy all this
content on your Evoke Flow, on smartphones and tablets running the Pure Connect app, and on the Pure
Connect website.
To access Pure Connect on Evoke Flow, you will need to connect Evoke Flow to your network. See below
for more information.
After connecting Evoke Flow to your network, you can register your Evoke Flow on the Pure Account
website. We recommend registering your Evoke Flow as this allows you to manage your Pure Connect
favourites.
Connecting to the Internet
Using your wireless network
1. Tap and select Pure Connect from the audio source
screen. Evoke Flow will scan for wireless networks and show
them in a list.
2. Select your network. If your network requires a key, follow steps
3‑4.
3. Enter your network key or password by turning and pressing
the Select dial to highlight and select characters. Select sp
to insert a space. Tap More... for lower‑case; Tap it again for
symbols. Tap Delete to remove the last character.
4. Tap Save to finish. Evoke Flow will connect to your network.
Helpful hint: Your Wi‑Fi key is case sensitive, make sure to enter it
exactly as shown.
A B CDEFGHIJKLM
NOPQRSTUVWXYZ
sp0123456789
Enter key or password
Delete Save More...
6578616D706C
Pure Connect home screen
Listening to Internet radio
Thousands of radio stations around the world broadcast online. To
listen, select Pure Connect from the audio source screen. Your
Evoke Flow will tune to the last station you listened to or show you
the stations list. Turn the Select dial to enter the Pure Connect home
screen. Select Live Radio to see a list of currently available Internet
stations. Use the Select dial to browse the list and push to tune in. You
can add a station to your Favourites by tapping Add.
My favourites♥
Live Radio
Listen again
Podcasts
Pure Sounds

9
EN
Search for a station
Tap Search when browsing the station list to search for stations by
Name, Genre, Country, Language, Quality (sound quality), or any
combination of these. Use the Select dial to set your options and tap Go
to see the list of results.
Searching for an internet radio station using Quick Jump
The Quick Jump function lets you to search for stations that begin with a
certain letter. To use Quick Jump:
1. Tap the A-Z button to open the Quick Jump box.
2. Turn and press the Select dial to select the first letter of the radio
station that you want to search for.
Listening to other Internet content
Tap and select Pure Connect from the audio source screen, then
one of the following content types:
Listen again
Select this option to access the BBC Listen Again service, which lets you
catch up with any BBC radio shows that you might of missed. These
archived programmes are available to listen to for a set period of time
after the live broadcast.
Podcasts
Podcasts are prerecorded audio shows on a wide variety of subjects
such as comedy, arts, business, and culture, for you to enjoy anytime.
Pure Sounds
Our library of evocative ambient sounds, including birdsong, cityscapes,
and waves on shore.
Creating a Pure account
All you need to create a Pure account and register your Evoke Flow is a
valid e‑mail address. We’ll need to send you a couple of e‑mails and you
won’t be able to complete the process without access to them.
To create a Pure account:
1. Open your Internet browser.
2. Go to account.pure.com.
3. Click Create one now and follow the instructions on‑screen.
Register your Evoke Flow with Pure
1. Log in to account.pure.com and click on the Products tab.
2. Click on the Register your product button and follow the steps to
register your Evoke Flow.
3. From Pure Connect settings on your radio, select Register with
Pure Connect to enter your code. Use the Select dial to highlight
and select characters; tap Delete to erase characters; and tap
Save to finish.
Congratulations! You’ve registered your Evoke Flow with Pure. The favourites
you’ve created on Pure Connect will be visible on your Evoke Flow, and
those you’ve created on Evoke Flow will appear on Pure Connect.
Pure Connect tagging service
The Pure Connect tagging service can be used to identify tracks that are
playing on a digital, FM or internet radio station.
To identify the name of the song that is currently being played, tap
the Tag button.
Clear all Clear Go
Name [All]
Genre [Classical]
Country [Netherlands]
Language [Dutch]
Quality [All]
Station search screen
Wind chimes in suburbs
Wooden lock
Accoustic guitar (E,A,D...
Active daytime birds
Arctic Blizzard
Browsing Pure Sounds
account.pure.com
Optional registration at
connect.pure.com adds
advanced features to your
radio. Register now?
Ye
sN
everLater
Enter registration code
DelSav
eM
ore...
QPZKE
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
sp 0 1 2 3 4 5 6 7 8 9

10
You can stream audio stored on your computer or on a UPnP‑compatible Network Attached Storage
(NAS) device to Evoke Flow. To stream audio from your computer you will need to install media server
software on it.
Listening to streamed tracks on Evoke Flow
1. Tap and turn and press the Select dial to choose Media player from audio source screen.
2. Turn and press the Select dial to choose the media player that you want to stream audio from.
3. Turn and press the Select dial to navigate and select the track or playlist.
Playing/pausing audio playback
Press the Select dial to pause/play a track that is playing on Evoke Flow.
Seeking within a track
While paused, you can hold down the and buttons to seek within the track.
Skipping backwards and forwards between tracks
If you are streaming audio on Evoke Flow from a media server, you can tap the buttons to skip
back/forward between tracks.
Streaming audio from a PC or Mac

11
EN
Listening to digital or FM radio
Changing digital stations
1. Turn the Select dial left or right to browse through the list of
available digital stations.
2. Push the Select dial to change the station.
Searching for digital stations
1. Turn the Select dial left or right.
2. Tap A-Z to open the search option.
3. Turn and press the Select dial to select the first letter of the
radio station that you want to listen to.
4. Push the Select dial to change the station.
Changing FM stations
Turn the Select dial to seek to the next or previous FM station.
Storing a preset
Tune to the station you want to store as a preset and tap Presets.
Turn the Select dial to highlight a preset number. Tap Store to store
the preset. (You can replace existing presets).
Listening to a preset
Tap Presets, select the station that you want to recall and tap
Listen, or push the Select dial.
Extend the aerial, then tap and select Digital radio or FM radio from the audio source screen. The
first time you select digital radio, Evoke Flow will perform an autotune to find all available stations and will
tune into one when finished.
BBC Radio 6Music
Now playing: Juicy Fruit
by Mtume
Presets Flow Options
DR
Absolute Rad 60s
OK
Absolute Radio
Absolute Rad 00s
Absolute Rad 70s
Absolute Rad 90s
A-Z
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
sp 0 1 2 3 4 5 6 7 8 9
Select starting character
BBC Radio 6Music
OK
Store
Empty 1
Empty 2
Empty 4
Empty 5
Digital radio screen
Changing digital radio station
Searching for digital radio
station
Selecting a preset
103.30
Seek tune
OKPresets Options
Changing FM radio stations

12
Setting alarms and timers
Evoke Flow has two alarms and two types of timers (kitchen and sleep). To set an alarm or a timer up, tap
Options and select Alarm or timer.
Setting an alarm
1. From the Alarm or timer menu, Turn and press the Select dial to select either Alarm 1 settings or
Alarm 2 settings and tap Edit.
2. Turn and press the Select dial to turn the alarm On or Off.
3. Turn the Select dial to adjust the hours and tap to confirm. Repeat to set the minutes.
4. Turn the Select dial to set the days the alarm sounds. Choose between Once only, Daily,
Weekdays,Weekends, Every Saturday and Every Sunday then Press the Select dial to confirm.
5. Turn the Select dial to set the alarm type. Choose between Pure Connect station, Digital radio, FM
radio or Tone then Press the Select dial to confirm.
6. If you’ve set the alarm type as Pure Connect station, Digital radio or FM radio, turn the Select dial
to choose between Last tuned (last station tuned to) or select a favourite Pure Connect station or
digital and FM preset if you have any saved.
7. Turn the Select dial to change the alarm volume and tap to confirm.
8. A set alarm is indicated by in the icon bar.
Note: Any alarms that are set will not go off if Evoke Flow is being powered by a ChargePAK.
Setting the sleep timer
The sleep timer switches your radio into standby/sleep after a specified amount of time. From the Alarm
or timer menu, select Sleep timer. Use the Select dial to adjust the length of the sleep timer in 15 minute
steps from 15 mins to 1 hour 30 mins. Tap Save to store.
A set sleep timer is indicated by in the icon bar.
Setting the kitchen timer
The kitchen timer sounds a beeping tone after a set period of time.
From the Alarm or timer menu select Kitchen timer and use the Select dial to adjust the length of time.
Tap Mins to toggle between minutes and hours. Tap Save to confirm.
A set kitchen timer is indicated by in the icon bar.
Cancelling a sounding alarm or timer
To cancel a sounding alarm or timer, push either the Select or Volume dial. A sounding alarm will
automatically cancel after 1 hour.
Note: Pushing the Volume dial will not cancel a tone alarm.
Warning: When powered by ChargePAK E1, pressing Standby switches the radio off and any set alarm or
timer will not sound.
Snoozing a sounding alarm
Tap the Snooze button to snooze a sounding alarm for the specified time (default 9 minutes).
Changing the alarm snooze time
From the Alarm or timer menu, select Snooze time. Use the Select dial to adjust the duration of the
snooze from 5 to 15, then either 20/25/30/40 minutes, or 1 hour.
Cancelling a snoozing alarm
To cancel a snoozing alarm push either the Select or Volume dial.

13
EN
Pure Connect settings
These settings are only available when listening to Pure Connect. Tap Options, then select Pure
Connect settings.
Clear favourites
Select Clear favourites to remove all stations/podcasts/Pure Sounds from your favourites list, as well as
from Pure Connect if your radio is connected.
Register with Pure Connect
Enter your Pure Connect registration code if you haven’t already done so.
Autotune
The Autotune option scans all digital frequencies for stations and automatically adds any new digital
radio stations and removes any inactive ones. This option is only available if listening to digital radio. Tap
Options, then select Autotune.
FM settings
These settings are only available when listening to FM radio. Tap Options, then select FM settings.
FM tuning
To change the way the Select dial works, choose Seek tune or Manual tune.
Seek tune: Automatically tunes to the next station with a strong signal.
Manual tune: Tunes up or down in steps of 0.5MHz.
FM stereo
Switch between receiving FM stations in Mono (default) or Stereo. If listening with headphones, you may
want to change this setting to stereo.
Media player settings
These settings are only available when listening to the Media player source. Tap Options, then select
Media player settings.
Repeat
Select the repeat type.
Off (default): Tracks are played until the end of the current album, folder, playlist or search results.
All: Continuously repeats the current album, folder, playlist, or your search results.
Track: Repeats the current track.
Shuffle
Select the order that tracks in the current album, folder, playlist or search results are played:
Off (default): Tracks play in the order that they are displayed on‑screen.
On: Tracks play in random order.
Media server
View technical details about your current media server or re‑scan for alternative servers:
Current details: Turn the Select dial to view information about the Media server, including the media
server name, the software version, the IP address and the port number.
Scan for servers: Re‑scans for new servers on the network.
Network settings
The network settings menu, which allows you to configure your network, is available when listening to
Media player or Pure Connect.
Options and settings

14
Display options
Adjust display settings, such as screen duration and the information displayed while you are listening to
each source. Tap Options then Display to open the menu.
Information
Different information displays are available for each audio source:
Digital/FM radio
Scrolling text: Text information broadcast by the current station. May include song titles, programme
details, news, etc.
Reception info: Displays the current frequency and signal strength.
Time and date: Displays the current time and date.
Pure Connect
Description: Broadcast by the current station. May include song titles and programme details.
Location and Genre: Information about the current station, e.g., US Rock.
Time offset: Most stations will be live streams, but otherwise displays how far into a broadcast the
station is.
Wi-Fi signal strength: Displays a bar indicating the current Wi‑Fi signal strength.
Station URL: Displays the URL address of the current station.
Time and date: Displays the date with a full‑screen clock (as in standby mode).
Media player
Track info: Displays artist and album information (id3 tags).
Time offset/duration: Displays a progress bar and timers indicating the current track position.
Wi-Fi signal strength: Displays a bar indicating the current Wi‑Fi signal strength.
Time and date: Displays the date with a full‑screen clock (as in standby mode).
Active and Standby backlight
You can adjust the duration that the screen is illuminated when switched on or in standby. Select Active
backlight to adjust the display settings that apply when the radio is switched on or Standby backlight to
adjust the display settings that apply when your radio is in standby. Choose from Always on or Off after
7 seconds.
Changing the radio name
Your Evoke Flow is assigned a name. This name is used so that you can find your radio easily when using
the Pure Connect website to manage your listening. This name is also used to identify Evoke Flow as
an available speaker in the Pure Connect app. By default this name is My Evoke Flow, but here you can
change this to anything you like to make it more memorable. To assign a custom name to Evoke Flow:
1. Tap Options and turn and press the Select dial to select Additional settings.
2. Turn and press the Select dial to select View/change device name. The name that has currently
been assigned to Evoke Flow will display at the top of the screen.
3. Turn and press the Select dial to enter a new name.
4. Tap Save when you have finished setting up the radio name.

15
EN
Network settings
Tap Options from either Pure Connect or Media player, then select Network settings to view options for
configuring your network connection.
Connection wizard
Scan for wireless networks to connect to.
View details
Displays your wireless network configuration details.
Network name (SSID)
Encryption method (WEP, WPA or WPA2)
IP address
Network mask
DNS IP address
Router IP address
Radio MAC address
Access point MAC address
Manual setup
Manually configure your wireless network settings (for advanced users only).
Retry connection: Attempts to reconnect to the selected network.
Network name: Scan for networks or Enter SSID manually to specify a new SSID for your wireless
network.
Encryption mode: Change the encryption mode between WEP, WPA (PSK), WPA2 (PSK) or None.
Evoke Flow automatically detects the mode for your network. Only change this setting if you think the
encryption mode is incorrect.
Key or password: Enter a new encryption key or password.
IP address: Choose between DHCP (dynamic) or Static.
Clear network settings
Evoke Flow will delete all previous Wi‑Fi connections, passwords and settings and perform a fresh scan for
available networks.

16
Changing the language shown on the display
To switch the display language between English, French, German and Italian:
1. Tap Options and turn and press the Select dial to select Additional settings.
2. Turn and press the Select dial to select Language.
3. Turn and press the Select dial to set the display language.
Binding the remote
If you have purchased the optional remote control, the Bind remote option matches the remote control to
your Evoke Flow. After matching the remote control, your Evoke Flow will be able to pick up the remote
control’s signals. To bind your remote control:
1. Tap Options and turn and press the Select dial to select Additional settings.
2. Turn and press the Select dial to select Bind remote.
3. Press Repeat and Shuffle on the remote at the same time.
4. Press Select on your remote to test the binding.
Upgrading Evoke Flow
Software updates may be issued in the future to provide new features and functions We recommend
using automatic software updates for your Evoke Flow, which are delivered via the Wi‑Fi connection. If
a software update is available, Evoke Flow will display a message asking if you would like to install the
software update.
To upgrade over your network manually
1. Tap Options and turn and press the Select dial to select Additional settings.
2. Turn and press the Select dial to select Upgrade.
3. Turn and press the Select dial to select Network.
4. Your radio will search for any available updates. If an update is available the message New version
available: vX.X will appear on screen (X.X is the version number, e.g. v2.1).
5. Tap OK to download and install the new software. This can take up to 5 minutes.
To upgrade using a USB cable (when a network is not available)
Contact Pure technical support (http://support.pure.com) for information on how to upgrade One Flow to
the latest version of software.
Warning: Do not switch off Evoke Flow while it is updating.

17
EN
Using an optional ChargePAK
ChargePAK makes your Pure radio truly portable, so you can enjoy the programmes you love in the garden
or at the beach.
Because it’s rechargeable ChargePAK is much cheaper than regular batteries. It’s also more eco‑friendly
because it reduces the amount of toxic substances sent to landfill. And, because it’s a fit‑and‑forget
solution that charges whenever your radio is connected to the power outlet, it’s much more convenient
than standard rechargeable batteries.
Installing a ChargePAK
1. Switch your Evoke Flow off and disconnect it from the power supply.
2. Open the battery compartment and push the ChargePAK connector plug into the socket in the
compartment. Line up the ridges on the plug with the slots in the socket. Do not force the plug.
3. Insert ChargePAK into the battery compartment.
4. Replace the battery door and connect your product to a power outlet.
5. ChargePAK will begin charging. When charging your ChargePAK for the first time or after an
extended period of inactivity we recommend that you charge it for around 24 hours to ensure full
battery power.
Note: It is normal for your ChargePAK to get warm, especially during charging. Your ChargePAK will give
years of trouble‑free use under normal circumstances, but like all rechargeable batteries its efficiency will
gradually reduce with age.
Important: Evoke Flow can only be powered with a Pure ChargePAK E1 and is not compatible with any
other batteries, either disposable or rechargeable, or any other ChargePAK model.
A
+

18
Help and advice
I am having trouble connecting to my network
• Your radio can’t connect to wireless networks that are access controlled, such as office networks,
without a WEP, WPA or WPA2 key or password.
• Your radio needs to be positioned within the range of your wireless network, which will be reduced if
there are walls between your router and radio. Although Evoke Flow is very good at picking up wireless
networks, the strength of the Wi‑Fi signal will vary depending on your router and the surrounding
environment. If Evoke Flow fails to find your wireless network, or the signal drops off, move the radio
closer to the router.
• Unless your wireless network is ‘open’ (this is generally not recommended due to the risk of
unauthorised access), make sure you have your WEP, WPA or WPA2 key to hand.
• If you also experience trouble connecting to your network with the Ethernet adapter, check your
Internet connection using a computer. If this is OK, try restarting your modem.
Screen displays ‘Station not available’
• If a station will not play visit http://support.pure.com for assistance.