PureMate PM 1550 User manual

CERAMIC TOWER HEATER
Model No: PM 1550
INSTRUCTION MANUAL
IMPORTANT
Do Not Use This Tower Fan Until You Have Read This Entire Manual Thoroughly
and keep it save place for future reference.
This product is only suitable for well insulated spaces or occasional use.

SAFETY PRECAUTION
English | 1
Thank you for purchasing the innovative PureMate Tower Heater. We wish you many
years of healthy indoor air with this efficient and effective product.
CAUTION: To avoid the risk of electrical shock, fire or injury to people, always ensure the
heater has been disconnected from the electrical outlet before moving, servicing, or
cleaning it.
- In order to avoid overheating, do not cover the heater.
- Do not use if the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or a similarly qualified person in order to avoid a hazard.
- This appliance can be used by children aged 8+ and people with reduced physical,
sensory or mental capabilities, if they have been given proper supervision or instruc
tion.This is not a toy.
- The heater must not be located immediately below a socket-outlet.
- To protect against electrical hazards, DO NOT immerse in water or other liquids. DO
NOT use near water.
- Children cannot recognize the hazards associated with the usage of electrical appli
ances. For this reason, always supervise children when they are near the unit.
- Do not leave your home while the appliance is in function: ensure that the switch is
in OFF(0) position and the thermostat is in minimum position. Always unplug the
appliance
- Keep the air inlet and outlet free from objects: at least 1 m in front and 50 cm behind
the heater.
- Keep combustible material such as furniture, cushions, bedding, paper, clothes,
curtains, etc. At least 100cm away from the heater.
- Do not operate any appliance with a damaged cord or plug, and/or the appliance
malfunctions, or if it has been dropped or damaged in any manner. Please contact
our Customer Service for assistance.
- Please unplug the heater when not in use.
- Ensure the tower heater is placed on a flat and even surface to prevent toppling.
- Please ensure the unit is turned off before unplugging.
- Do not place the cord under carpet or cover with throw rugs or furniture. Arrange the
cord so that it cannot be tripped over.
CAUTION
Some parts of this product can become very hot and cause burns. Particular attention
has to be taken where children and vulnerable people are present.

English | 2
SAFETY FEATURES
- In the event of abnormal overheating, a safety device shuts down the appliance
automatically. After a short cooling down phase, the appliance is ready for use again.
- If you still notice the same defect as above mentioned, remove the plug from the
socket and customer service.
- During use, do not touch or cover the air outlet.This may cause the unit to overheat,
and the safety device to operate.
- The unit is also fitted with a tip over switch. Do not use on thick and long pile carpets,
as the heater may not work, due the tip over switch not been activated.
SPECIFICATION
Power Supply: 220-240V ~ 50Hz
Power Consumption: 2000W (High Setting)
Dimensions: 21 x 16 x 50 cm
Net Weight: 2.4 kg
COMPONENTS
Control Panel
Air Outlet
Base
Handle
Main Power
Switch
Air Inlet
Power Cord

English | 3
PLEASE NOTE:When the heater has been turned off, the fan will continue to work for
30 seconds to cool the appliance.
OPERATING INSTRUCTIONS
Plug the unit in and turn on the main power switch at the back of the unit.
Press the Standby button to turn on the unit, this will enter Fan Mode. Press
again to turn off.
Press once to activate Low Heat (1200W). Press again to activate High Heat
(2000W)
Press to increase the desired room temperature.
Press to decrease the desired room temperature.
- Temperature can be set between 10 - 49°C
- When the heater has reached the desired set temperature, the fan mode
will continue to blow until the temperature has dropped to 2°C below the
et temperature (the heater will automatically turn on the low heat setting,
if the temperature drops 4°C below the set temperature the heater will
automatically choose the high heat setting.)
Press to activate oscillation. Press again to stop oscillation.
Press until you reach the desired number of hours (up to 8hrs) before you want
the heater to turn OFF.
Temperature
Decrease
Power
Button
Heat
Mode
Temperature
Increase
Oscillation
Timer
ON/OFF
MODE UP
TIMER DOWN OSCAL
CONTROL PANEL & REMOTE CONTROL

REMOTE CONTROL
At the end of the product life cycle, you should not throw this
machine into the normal household garbage but bring the product
to a collection point for the recycling of electrical and electronic
equipment.
DISPOSAL OF THIS DEVICE
CLEANING & MAINTENANCE
Before cleaning ensure the unit is off, cool and unplugged.
- Wipe the exterior with a soft, damp cloth. DO NOT use any harsh chemicals or abrasive
materials as this can cause damage to the unit.
- Ensure the unit is thoroughly dry before use.
- Remove excess dust from the Air Inlet and Air Outlet with a vacuum regularly.
- The remote control requires 1 CR2025 3V lithium battery (not included)
- Important: Follow the instructions of use and the recycle rules given on the
battery packaging.
- Open the battery compartment by sliding the cover down.
- Insert the battery into the compartment, observing the polarity in the diagram
(see below drawing).
- Close the battery compartment.
English | 4
WARNING: Keep batteries out of reach of children. Swallowing may
lead to serious injury or death in as little as 2 hours due to internal
burns. If swallowed, go straight to a hospital emergency room. Dispose
of used batteries immediately.
Danger if Swallowing
CR2025
SN
OPEN
PUSH
Remote Control
Release Tab
Insulating Film
Pull
Battery Carriage

English | 5
Information requirement for the electric local space heater
Model identifier(s): PM 1550
Item Symbol Value Unit Item Unit
Heat output
Type of heat input, for electric storage
local space heaters only (select one)
Nominal heat output
P
nom
2,0 kW
manual heat charge control,
with integrated thermostat NA
Minimum heat output
(indicative) P
min
0 kW
manual heat charge control with
room and/or outdoor
temperature feedback NA
Maximum
continuous heat
output P
max,c
2,0 kW
electronic heat charge control
with room and/or outdoor
temperature feedback NA
Auxiliary electricity
consumption Fan assisted heat output NA
At nominal heat
output el
max
N/A kW
Type of heat output/room
temperature control (select one)
At minimum heat
output el
min
N/A kW
single stage heat output and no
room temperature control [NO]
In standby mode
el
sb
0,002
kW
Two or more manual stages, no
room temperature control [NO]
with mechanic thermostat room
temperature control [NO]
with electronic room
temperature control [YES]
electronic room temperature
control plus day timer [NO]
electronic room temperature
control plus week timer [NO]
Other control options (multiple
selections possible)
room temperature control, with
presence detection
[NO]
room temperature control, with
open window detection
[NO]
with distance control option
[NO]
with adaptive start control
[NO]
with working time limitation
[NO]
with black bulb sensor
[NO]
Super Tech Health Ltd, 129 Shady Lane Birmingham B44 9ER,
United Kingdom
Contact details