PureTools PT-SW-HD3 User manual

User Manual
PT-SW-HD3
User Manual
HDMI 2.0 Bi-directional Switcher 4K (60Hz 4:4:4) HDR
Model PT-SW-HD3
Designed in Germany
© 2017 PureLink GmbH All rights reserved. VersionV1.0

User Manual
PT-SW-HD3
Preface
Read this user manual carefully before using this product. Pictures shown in this
manual are for reference only. Different model layouts and specifications are subject
to the physical product.
This manual is for operation instructions only, not for any maintenance usage.
In the constant effort to improve our product, we reserve the right to make changes in
functions or parameters without prior notice or obligation.
Trademarks
Product model and logo are trademarks. Any other trademarks mentioned in this
manual are acknowledged as the properties of the trademark owner. No part of this
publication may be copied or reproduced without the prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. It has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in
a commercial installation.
Operation of this equipment in a residential area is likely to cause interference, in
which case the user at their own expense will be required to take whatever measures
may be necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.

User Manual
PT-SW-HD3
REACH | 1907/2006/EU
ROHS | 2011/65/EU
PureLink hereby declares that this product PureTools PT-SW-HD3 complies with
Directives 1907/2006/EU und 2011/65/EU.
EMC / LVD (Electro Magnetic Compatibility / Low Voltage Directive)
PureLink GmbH hereby declares that this product PureTools PT-SW-HD3 complies
with Directives 2014/30/EU and 2014/35/EU. The full text of the EU Declaration
of Conformity is available at the following Internet address:
http://www.purelink.de/ce/4251364706961_CE.pdf

User Manual
PT-SW-HD3
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before
using the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing
material for possible future shipment
Follow basic safety precautions to reduce the risk of fire, electrical shock and
injury to persons.
Do not dismantle the housing or modify the module. It may result in electrical
shock or burn.
Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or
install this product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment
damage. If an object or liquid falls or spills on to the housing, unplug the
module immediately.
Do not twist or pull by force ends of the optical cable. It can cause
malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the
power to the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.

User Manual
PT-SW-HD3
1
Introduction to PT-SW-HD3
The PT-SW-HD3 is an ultra-thin bidirectional 3x1/1x3 HDMI2.0 switcher with 4 HDMI
ports. The switcher supports HDMI resolutions up to 4K@60Hz 4:4:4.
Feature
Supports HDMI2.0 4k@60Hz 4:4:4.
HDCP2.2 compliant.
Supports bi-directional switching.
Supports HDR.
Supports Hot-Plug detection.
No need of external power supply.
Supports smart EDID management.
Package Content
Please take an inventory of the package contents to ensure you have all the items
listed below. If anything is missing or damaged, please contact your distributor for a
replacement.
1 x PT-SW-HD3
1 x Velcro Tape
1 x User Manual

User Manual
PT-SW-HD3
2
Panel Description
①SWITCH: Press this button to switch 1-HDMI, 2-HDMI, or 3-HDMI as input or
output.
②IIN/OUT: Press this button to select the HDMI(③) as input or output.
③HDMI: Connect with HDMI source or display.
④IN: Illuminates blue when the HDMI port(③) is selected as input.
⑤OUT: Illuminates blue when the HDMI port(③) is selected as output.
⑥1/2/3-Signal LED: Illuminates blue when the corresponding source or display is
selected.
⑦1/2/3-HDMI: 3 HDMI ports, connect with sources or displays.
1-HDMI 2-HDMI 3-HDMI
1234567

User Manual
PT-SW-HD3
3
Specification
Video
Input & Output
(4) HDMI
Connector
(4) 19-pin type-A female HDMI
General
Max Resolution
4Kx2K@60Hz 4:4:4
HDMI Standard
HDMI2.0
HDCP Compliance
HDCP2.2 pass-through
EDID Management
Built-in EDID
Power Consumption
4W (Max)
Operation Temperature
-10~40℃
Storage Temperature
-15~55℃
Relative Humility
10%-90%
Dimensions (W*H*D)
80mm x 16mm x55mm
Net Weight
131g

User Manual
PT-SW-HD3
4
System Diagram
1-HDMI 2-HDMI 3-HDMI 1-HDMI 2-HDMI 3-HDMI
HDMI IN:
HDMI OUT:
Blu-Ray
Projector HDTV WhiteBoard
HDTV
Blu-Ray Laptop Game Console

User Manual
PT-SW-HD3
5
After-Sales Service
If there appear some problems when running the product, please check and deal with
the problems referring to this user manual. Any transport costs are borne by the users
during the warranty.
1) Product Limited Warranty: This product will be free from defects in materials and
workmanship for two years (The purchase invoice shall prevail).
Proof of purchase in the form of a bill of sale or receipted invoice which is
evidence that the unit is within the Warranty period must be presented to obtain
warranty service.
2) What the warranty does not cover (servicing available for a fee):
Warranty expiration.
Factory applied serial number has been altered or removed from the product.
Damage, deterioration or malfunction caused by:
Normal wear and tear.
Use of supplies or parts not meeting our specifications.
No certificate or invoice as the proof of warranty.
The product model showed on the warranty card does not match with the
model of the product for repairing or had been altered.
Damage caused by force majeure.
Servicing not authorized by distributor.
Any other causes which does not relate to a product defect.
Delivery, installation or labor charges for installation or setup of the product.
3) Technical Support: For any questions or problems, contact your distributor or
reseller and tell them the respective product name and version, the detailed
failure situation as well as the formation of the cases.

User Manual
PT-SW-HD3

User Manual
PT-SW-HD3

User Manual
PT-SW-HD3
Asking for Assistance
Technical Support:
Phone: [phone] - 0
Fax: [phone]
Technical Support Hours:
8:30 AM to 5:00 PM Monday thru Thursday
8:30 AM to 4:00 PM Friday
Write to:
PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
www.purelink.de
[email protected]