Pyle PBT92 User manual

BLUETOOTH AUDIO CAR KIT
+FM TRANSMITTER
INSTRUCTION MANUAL
Model: PBT92

Introduction
This device, Lets you stream music and calls directly from your Bluetooth device to your car FM
stereo system.The built-in microphone provides you with an amazing hands free function, it also
features a USB and SD card reader that lets you steam your favorite MP3 and WMA tunes to your
car’s stereo system.Play music files from external device by connecting your music device using the
Aux port too. It also can charge your phone using the DUAL USB charging Port. Its Bluetooth chip
can be used with a wide range of device which can make can your driving more interesting.
Packing contents:
Bluetooth device
Aux-in cable
IR Remote
User Guide
Specification:
Bluetooth version: JL IC
Frequency range: 87.5-108.0MHZ
Frequency stability: ±10ppml
Product Input:12-24V
Charger output: 5V/2.1A(in total)
Music Format: mp3, wma
USB(Max capacity): 32GB
SD Card( Max capacity): 32GB
Audi input:3.5mm stereo jack.
Transmit Distance: about 10 m
Features:
1.Wirelessly transmit phone call from Bluetooth mobile phone to the car FM stereo system;
2.Switch to Hands-free mode automatically from music playing status when receiving calls;
3.Built-in Microphone
4.Supports music play back from USB AND SD card
5.3.5mm Aux jack to support play back from external audio devices.
6.Dual USB output to charge for mobile phones and other devices(Output 5V/2.1A)
7.7.Strong and elegant design with LCD frequency display.
8.With remote control
9.With Voice prompts

Compatibility:
This device may be paired as a hands free kit with any compatible Bluetooth enabled devices.
Precautions:
Please read all safety instruction wan warnings carefully before using this product.Improper use of
this product may result in damage to this or attached products.To ensure the production works
well,please never use this in the following conditions :
1.Moist or underwater conditions.
2.Conditions near heater or high-temperature service.
3.Conditions with direct and strong sunshine,
4.Conditions with apt falling
5.Never dismantle the product without due permission,otherwise it may nullify the warranty
clause.
Appearance:

Operation Instructions
Using FM Transmitter function:
1. Plug the FM transmitter into your vehicle’s cigarette lighter or power port.
2. Tune your radio to an unused FM frequency, then match the same frequency of this unit.
3. Insert a USB flash drive into the SD card or the inward USB port which containing MP3 files into
USB port or memory card slot of this unit accordingly. It will play and transmit the MP3 files
automatically.Pay attention, only the inward USB Port can serve as a USB Reader!
4. Line-in function: Use the provided audio cable to connect an MP3/MP4 players or another
external device to the AUX input of this unit. When using this function, please stop playback of
USB or memory card, and all functions will be controlled by the external device.
Using Bluetooth function:
1. Using Bluetooth for the first time, you need to pair your mobile phone with this unit. Activate
your mobile phone's bluetooth function, then search new device. When the mobile phone detects
this unit (named as "BT-T66"), please pair and connect by using the original password "0000"
2. In the music playing mode, when there is an incoming call, this unit will automatically switch to
telephone mode.
Bluetooth calling
1. Please press the blue " " knob to answer the incoming call.
2. Please press the blue "" knob to hang off a call.
3. Press the blue “”knob twice to dial the last Number.
4. When making a call, you can only dial the phone number by your mobile phone, but once the
call connected, you can use the hansfree function to enjoy it.
Using USB charger function:
When this unit powered from car lighter socket, connect the USB port of this unit to your mobile
phone with a special USB cable (not included), This unit will serve as mobile phone charger.Pay
attention! The Dual USB port outputs 2.1A together,and the smart chip will divide the voltage
based on the need of device automatically. But only the outward USB port can charge the iPad!

Quick Guide:
Operation Guide
On FM transmitter
On Remote Controller
1. Answer / hang
up the call:
Press " " button: answer the call
Press " " button: hang off the call
Press” ”button
2.Play and Pause
the music:
Press “ ” Button: Play the music
Press “ ” Button again: Pause playing
Press “ “Button
3. Adjust the
Volume:
Rotate in clockwise to decrease Volume
Rotate anticlockwise to increase Volume
Press “Vol+” to increase the
Volume；
Press “VOL-” to decrease the
Volume；
4.Set frequency:
Press “M” button first, then
press “ ”: increase the frequency
Press ” ”: decrease the frequency
Press “CH+” button: Increase
0.1MHz
Press “CH-” button: decrease
0.1MHz
Or press the numbers of the
frequency what you desired, press
“CH+” to confirm.
5. Choose music:
Press “ ” Button: Play the next song
Press “ ” Button: Play the previous song
Press button: Play the next
song; Press button: Play the
previous song;
Or press the number of the song
then press to confirm
7. Choose EQ:
Support by remote controller only
Press “EQ” button to choose your
favorite EQ
8. Switch folder:
Support by remote controller only
Press "folder" button to switch
folder
On our website you can discover more iPhone & android integration.