Pyle BOOM ROCK PWMAB250 Series User manual

300 Watts Wireless BT Portable PA
6.5” Speaker System
PWMAB250BK - PWMAB250RD
with USB/SD/FM Radio/Rechargeable Battery,
Remote Control and One wired Microphone

www.PyleUSA.com
2
Read all documentations carefully before operating the equipment.
Retain this manual for future reference.
Panel Design
1. Master volume controller
2. Mic volume controller
3. ECHO controller
4. MIC input slot
5. Full indicator lights
6. AC input
7. Charging indicator lights
8. Aux input
9. Display screen
10. Power ON/OFF switch
11. Rec/Replay function
12. Repeat function
13. Previous song selector
Previous radio station
14. Play for Mp3 or other audio sources
Auto scan for radio stations
15. Next song selector
Next radio station
16. Input selectors
17. USB input for Mp3 player
18. SD/MMC card input for Mp3 player

www.PyleUSA.com
3
Remote Control
1. Power: ON/OFF
2. Mode: Press this button to select AUX/USB/BT/FM input mode. When you are
recording-Press and hold this button more than 3 second, unit will delete the
recorded les.
3. Mute
4. Play/Pause function
FM MODE: Press this button once, unit will auto scan radio station.
5. EQ
6. PREVIOUS
USB/SD MODE: Previous song
FM MODE: Previous station
7. NEXT
USB/SD MODE: Next song
FM MODE: Next station
8. Volume -
9. Volume +
10. 0-9 USB/SD or preset radio statons selector
11. Repeat function for USB/SD
12. Recording function: Press and hold this button more than 3 seconds, unit will
record what you say, then short press this button once, unit will play the recorded
les. Use PREVIOUS/NEXT to select the recorded les.
Mode
-
+
EQ
REC
0
1
4
7
2
5
8
3
6
9

www.PyleUSA.com
4
Instructions
Power ON/OFF
The PA speaker can be powered when connected to main power or using the
internal 9V battery.
1. Connect the power cable to the top of the unit.
2. Connect the other end of power cable to main power.
3. Turn ON the switch for the main power.
4. The unit will automatically power ON when connected to main power.
Notes:
If you wish to use the internal battery to power the unit, just simply turn on the Battery
switch located on the top of unit to ON.
Charging
Before using the PA speaker for the rst time, charge the unit at least 8 hours.
1. Connect the power cable to the top of the panel.
2. Turn o the battery switch on the top of the panel.
3. Recharge indicator light will light when unit is charging.
Notes:
The internal battery will charge while the unit is being operated and the power
switch is ON. It is better to charge the unit while the power switch is o.
Using the Wired Microphone
You can connect the wired microphone to this unit using the MIC INPUT located
on the top of control panel.
1. Turn OFF the unit.
2. Connect your wired microphone to the MIC INPUT located on top of the control
panel.
3. Adjust the microphone volume by tuning the MIC VOL/ECHO knobs located on
top control panel.
Notes:
You can use the wired microphone and wireless microphone at the same time.
Connecting a Guitar
You can connect your Guitar to unit using the 1/4" GUITAR INPUT plug.
1. Turn ON the unit.
2. Connect your guitar cable to GUITAR INPUT port on top control panel.
3. Adjust the volume by turning the GUITAR VOL on top control panel.

www.PyleUSA.com
5
USB/SD Card Playback
You can play music from USB stick or SD Card using the USB/SD slot on the PA
speaker.
1. Turn ON the unit.
2. Insert your USB or SD card into the slot.
3. Once inserted the USB or SD card unit will begin automatic play.
4. You can use the PRE/NEXT/PLAY/PAUSE to control and play music.
Notes:
The speaker system can play the following audio le formats: MP3, MP4, WMA.
The USB/SD Card no more than 32GB. Operation may be slower when searching
large memory les. It will need several seconds to respond when your USB/SD
Card is full of contents.
Wireless BT Playback
You can connect your Wireless BT phone or other devices to the PA speaker.
1. Turn ON the unit.
2. Press the INPUT button which located on top control panel, near the USB/SD slot.
3. The Wireless BT is active when you hear two "tone" indicator sound.
4. Use your Wireless BT phone or other devices to search for the PA speaker. It will be
displayed as PYLE SPEAKER.
5. Connnect your devices with PYLE SPEAKER, it will pair with unit automatically.
6. You do not need code and get connected with unit.
7. Play music on your phone or device, sound will come from the speaker through
the Wireless BT connection.
8. You can use the VOLUME to adjust the sound level for Wireless BT, also you can
adjust the Wireless BT music sound through your own phone or other device.
Notes:
If there is no sound through the PAspeaker during Wireless BT, Check the volume
controller both on the unit and on your phone or other device.

www.PyleUSA.com
6
Using the Radio
1. Turn ON the unit.
2. Press Mode button (Unit/Remote control) to select FM mode.
3. Press "Scan" button which was located on front panel, unit will auto search and
store the radio stations with the strongest signal.
4. Press PRE/NEXT button to select desired radio station.
Ensure that you have the extended the antenna located on the rear of the speaker.
It will ensure the best possible radio quality and signal strength.
Use of the External Battery Option
To use the PA speaker longer than the internal battery life, you can connect the PA
speaker to a external 9V Battery Source.
1. Find the INPUT DC 9V on the top control panel.
2. Use the correct cable connect the INPUT DC 9V.
Notes:
The PA speaker will consume the internal battery rst, when it is low, the LOW
BATTERY indicator light located on the control panel will turn on, you can use the
external 9V battery to power on the unit. The external12V battery will also charge
the internal battery while in use.
Recording and Repeat function
When you insert USB or SD card, insert the Microphone, press Record/Replay button
more than 3 seconds, the unit will record what you say, then short press this button,
unit will replay the recorded les. Use PRE/NEXT to select the recorded les. If you
don't want to keep the recorded les, press and hold MODE button for 3 seconds,
unit will delete the recorded les.
This product can expose you to a chemical or group of checmicals,
which may include ”Lithium Carbonate” which is known in the state
of California to cause cancer, birth defects, or other reproductive harm.
For more info, go to https://www.p65warnings.ca.gov/.

www.PyleUSA.com
7
Features:
• Built-in BT for Wireless Audio Streaming
• Works with All of Your Favorite Wireless BT Devices
(iPhones, Androids, Smartphones, iPads, Tablets, PC, etc.)
• Instant Karaoke: Includes Microphone & 1/4" Mic Input
• USB Flash Drive & SD Memory Card Readers
• AUX (3.5mm) Input for Connecting External Devices
• Built-in Rechargeable Battery (3 Hour Battery Life)
• FM Radio
• Volume, Mic Volume, Echo Controls
• Convenient Carry Handle
What's in the Box:
• Portable Bookshelf Speaker
• Handheld Microphone
• Wired Microphone Cable
• Audio Connection Cable
• Remote Control
• Power Cable
Technical Specs:
• 300 Watt Peak Power - 150 Watt RMS @ 4 Ohm
• Sound System: 6.5" Woofer and 1" Tweeter System
• Frequency Response: 20-20kHz
• Wireless BT Operation Range: 65 Feet
• Rechargeable Battery: 7.4V Lithium, 1800mAh 2.5Wh
• Power Supply: 110V/220V Switchable
• Unit Dimensions (L x W x H): 8.5'' x 4.0'' x 12.5'' -inches

Questions? Issues?
We are here to help!
Phone: [phone]
Email: suppor[email protected]om