Pyle PSBV110B User manual

Questions? Issues?
We are here to help!
Phone: [phone]
Email: suppor[email protected]
Wave Base Wireless BT Tabletop Soundbar
Digital Speaker System with Remote Control,
AUX (3.5mm) & Optical In, USB In
PSBV110B

Before using your new product, please read these instructions
to prevent any damage.
Important safety instructions
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings.
Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including ampliers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not t into your outlet, consult
an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of
time.
• Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
• To reduce the risk of re or electric shock, do not expose this device to rain, moisture,
dripping, or splashing, and no objects lled with liquids, such as vases, shall be
placed on it.
Using close to a TV or computer
Some older TVs and computer monitors are magnetically sensitive devices and as such
are likely to suffer discoloration or picture distortion when conventional speakers are
placed nearby. If discoloration problems persist, try moving the soundbar away from
your TV or monitor.
Placement
• Sensitive to extreme temperatures and humidity. Do not put it in locations subject
to direct sunlight or in humid places, such as near an air conditioner, humidier,
bathroom, or kitchen.
• Do not put water or other liquids close to the soundbar.
If liquid is spilled over the soundbar, it may be damaged.
• The soundbar should be placed on a sturdy, at surface that is free from vibration,
or mounted on a wall. Do not put the soundbar on an uneven or unstable surface,
where it may fall and cause damage.
This user manual explains how to correctly install, operate, and get the best
performance from your Home Theater Wireless BT Soundbar Speaker.
Read this user manual carefully before installing your system, and then keep it
handy for quick reference.
AUX FUNCTION
1. Put the 3.5mm cable into the Aux-in port and the other side into the mobile device.
2. Short press "MODE” into Aux in mode, with indication of Line-in, the green light will
is lit.
3. Hold the VOL-/PREV on the sound bar to decrease the volume.
4. Hold the VOL+/NEXT on the sound bar to increase the volume.
FUNCTION DESCRIPTION
www.PyleUSA.com
2www.PyleUSA.com 3
5678
4
3
1 2

1. Power: Switch on or to standby
2. Mute/Unmute
3. Press to enter USB Mode when USB is Plugged in.
4. Press to enter AUX Mode
5. Press to enter BT Mode
6. Press to enter OPT Mode
7. Press to Next track on USB/BT Mode; Press and
hold to fast forward on USB Mode
8. Press to Previous Track on USB/BT Mode;
Press and hold to fast rewind on USB Mode
9. Press to Play/Pause on USB/BT Mode. In BT,
press and hold to disconnect current connection
and enter pairing mode. Press to mute/unmute
in AUX or Optical mode.
10. Press for Volume +; Press and hold for fast
Volume increase.
11. Press for Volume -; Press and hold for fast
Volume decrease.
12. EQ button
www.PyleUSA.com
4www.PyleUSA.com 5
OPERATION INSTRUCTION
ON/OFF Switch
1. Connect the DC port of adapter to the sound bar then connect the power cord to
a wall socket
2. Press the “POWER” to switch ON the sound bar, and it will enter BT mode
automatically, with both sound alerts blue LED ashes quickly; press and hold the
"POWER" again to switch OFF.
3. The Soundbar automatically turns OFF after 15 minutes idle.
WIRELESS BT CONNECTION
1. Put the soundbar near the BT device.
2. Switch ON the PSBV110B, an alert sound will appear and blue LED ashes quickly,
which means it is ready for pairing.
3. Turn ON the BT function of the mobile device, search for "PYLE" and connect to it
once found. If a Passkey is requested, enter “0000”.
4. An alert will appear when connected, and the blue LED light will be on.
5. The soundbar will reconnect to the last paired device when switched on,
If it doesn't connect, the soundbar will enter pairing mode automatically.
OPTICAL FUNCTION
1. Plug the optical cable into the optical port and the other side to TV or other device
with optical/digital port.
2. Short press "MODE" into optical mode, LED lights (white) will light indicating
"optical", music will start playing.
USB FUNCTION
1. Press “MODE” to USB mode, red LED lights on.
2. Press “POWER” on Soundbar or “PLAY/PAUSE” on remote control to play/pause.
3. Press VOL-/PREV or VOL+/PREV to go to previous/next song.
FUNCTION DESCRIPTION
1. VOL-/PREV: Press and hold to decrease the volume, press to skip to previous track.
2. VOL+/NEXT: Press and hold to increase the volume, press to skip to next track.
3. Mode: Press to change between modes AUX/OPTICAL/USB/BT.
4. Power: Press and hold to switch ON/OFF the sound bar. Press to play/pause music.
5. AUX IN Port.
6. Optical Port.
7. USB Port.
8. DC IN Port.
Note: The RC sensor is at the front of the sound bar.
REMOTE CONTROL FUNCTIONS