Pyle PWMA850UFM User manual

PortablePASpeakerSystem
withFlashingDJLights
PWMA850UFM
Questions? Issues?
We are here to help!
Phone: [phone]
Email: suppor[email protected]om
Built-in Rechargeable Battery, MP3/USB/SD Readers,
FM Radio, 400 Watt

We recommend that you read this manual carefully so that you can fully take
advantage of the advanced and convenient functions of the Portable PA Speaker
and Microphone System. We also recommend that you keep this manual in a
safe and handy place for future reference.
CAUTION
WARNING! DON'T OPEN THE MACHINE TO AVOID ELECTRIC SHOCK, PLEASE ASK
HELP FROM PROFESSIONAL TECHNICIANS.
SAFETY INSTRUCTION
1. Read this manual carefully before using. Retain for future reference.
2. All warnings on the speaker and in the operating instructions should be adhered to.
3. Do not use this apparatus near water.
4. Do not block any of the ventilation openings. Install in accordance with the
manufacturers instructions. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including ampliers) that produce heat.
Do not install the speaker in an airtight location.
5. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
6. Switch OFF and unplug then use a soft cloth to clean the exterior of the unit if it
becomes dirty. If necessary, use a damp cloth that has been wrung out well to
wipe it.
7. Unplug this apparatus during lightning storms or when unused for long periods of
time.
8. Keep foreign objects and liquid from entering the unit to avoid a short circuit, re
and electrical accidents.
9. Place the speaker in a dry location.
10. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture , does not operate normally, or
has been dropped.
SYSTEM FUNCTION FIGURE
1. Wireless Mic/FM Receiving antenna
2. Power Switch
3. DC 12V PowerSwitch
4. Voltage Selector Switch
5. The function switch indicator
6. Work display window
7. AC Power Socket
8. DC 12V input Power Socket
9. USB/SD/MMC function control,
function from left to right are:
Input/prev(CH-)
P/P(scan)/next (CH+)/VOL-/VOL+
www.PyleUSA.com2www.PyleUSA.com 3
10. USB Socket
11. SD/MMC Socket
12. MIC Volume Control
13. MIC 1 and MIC 2 Input Jack
14. Echo Control
15. Drum Input Jack
16. Guitar Input Jack
17. GuitarVolume Control
18. Drum Volume Control
19. Tweeter

www.PyleUSA.com4www.PyleUSA.com 5
SYSTEM FUNCTION FIGURE
20. Bass Control
21. Volume Control
22. AUX Input Jack
23. FM radio telescopic antenna
24. Trailer Handle
25. The control panel
26. Racing lights
27. Tweeter
28. Woofer Speaker
29. Metal Corner
30. Vent Hole
INSTRUCTIONS
1. Conrm the power
AC Power: Before operation, please conrm the voltage is same as the specied
marked on the label. If not, the unit will be damaged.
Built-in Rechargeable Battery: Plug-in the AC power when the rechargeable
battery voltage is enough but use the battery directly. When the Low Voltage
indicator turns yellow, it indicates the low battery, please charge it in time. When
the Low Voltage indicator turns OFF, it indicates the voltage is standard now.
If the unit will not be used for a long time, please charge the rechargeable battery
every 2 months, 8-10 hours for each time.
2. Operation Instructions
• Plug the power cable into the socket and connect it with this amplier system.
• Switch ON the amplier the red Power Indicator will be lit.
• During charging, RECHARGE indicator turns red, when the indicator is ashing,
that means battery is almost full and turns OFF when fully charged.
• During charging, you can play music at the same time, the RECHARGE indicator
will ash with the current comsuption indicating the speed of charge. Charge time
is in direct proportion to the volume of music. When the battery is full, RECHARGE
indicator will stop ashing and turns o.
• Put two AA 1.5V battery into handheld microphone (bodypack transmitter), push
the Power Switch to the middle, the Power Indicator will ash once, RF Indicator
turns green.
• Push the handheld microphone Power Switch (bodypack transmitter) to ON position,
your sound can be heard from amplier when speaking.
Adjust the Volume Control/Echo Control/Treble Control/Bass Control to proper
position to avoid feedback.
• If the microphone Power Indicator (bodypack transmitter) turns on at all times,
it indicates the low battery, please replace the battery.
• Connect relative guitar cable with Guitar Input Jack on this system to play music.
31. Article package
32. Fixed Stand For The Unit
33. Truckle OfTrailer
34. Trailer Handle
35. Racing lights power
36. Fixed Stand For The Trailer
37. Trailer wheel
38. Mic Head
39. Handheld Mic RF Indicator
40. Handheld Mic Power Switch
41. Handheld Mic Battery Housing

www.PyleUSA.com6www.PyleUSA.com 7
3. Wired Microphone
• Two way wired microphone input jacks are supplied for two people to use
simultaneously.
• Plug Wired microphones into the jacks separately. Adjust Echo Control to get
better sound.
• Adjust the volume of each microphone to make sure the sound is satisfactory.
When you turn on the unit, be sure ECHO control is set to low or there will cause
sound distortion.
System Features:
• Compact, Portable & Powerful PA Speaker System
• Flashing DJ Lights Display Panel
• Built-in Rechargeable Battery
• Sound System: 8'' Extended Bass Subwoofer
• Full Range Stereo Sound Reproduction
• FM Radio with Frequency Display Screen
• Top Panel Button Control Center
• (2) 1/4'' Microphone Inputs
• 1/4'' Lo-Z Guitar Input With Volume Control
• 1/4'' Drum Input For Other Instruments
• USB Flash & SD Memory Card Readers
• USB Port Doubles as Smartphone Charge Port
• Aux (3.5mm) Audio Input Jack
• Connect & Stream Music from External Devices
• Includes Wireless Handheld Microphone
• DC 12V Power Input (External Power)
• Built-in Crossover Network
• Convenient Handle & Rolling Wheels for Portability
• 35mm Speaker Stand
Technical Specs:
• MAX Power: 400 Watt Peak Power
• RMS Power: 200 Watt @4 Ohm
• Sensitivity (1W/1M): 90dB
• 1/4" TS/unbalanced with 3.5mm TRS Stereo
• T.H.D.: 10%
• Flashing Light Control, ON/OFF Switch
• Power: 110/220V, Switchable
• Dimensions: 20.5'' (H) x 10.2'' (W) x 8.4'' (D)