Pyramid TimeTrax Clock User manual

Time and Attendance System
SERIAL / USB QUICK START GUIDE

©2009 Pyramid Technologies, LLC. All rights reserved.
PYRAMID TIMETRAX MOBILE SERIAL QUICK START GUIDE
WHAT’S IN THE BOX?
• Pyramid TimeTrax time recorder
• AC Power supply
• TimeTrax Software CD
• Quick Start Guide
• 7’ communication cable with
RJ45 connectors on both ends
• Diagnostic (loop-back) plug –
DO OT DISCARD –
Save for future u e.
• RJ45 to 9-pin (DB9) serial port
adapter
• USB interface with standard
RS232 adapter
• Employee Swipe Cards
MINIMUM SYSTEM
EQUI EMENTS
• PC with a Pentium® class or
faster processor
• 128 megabytes of RAM
• Either: 9-pin (DB9) serial port or
USB port
• 1 gigabyte of free space on the
system’s hard drive
• Windows® XP, 2000, T or Vista
• Printer (if hard copy reports are
desired)
NEED TO PLACE AN O DE ?
For cable exten ion and other upplie ,
call Pyramid Technologie , LLC at:
[phone]
QUICK STA T GUIDE
Pyramid TimeTrax Mobile
SE IAL / USB MODEL
SOFTWA E MUST BE FULLY INSTALLED P IO
TO CONNECTING ANY TE MINAL CABLES
CUSTOME SE VICE PHONE NUMBE
[phone]

1
PYRAMID TIMETRAX MOBILE SERIAL QUICK START GUIDE
INSTALLING THE SOFTWA E
NOTE: Prior to i stalli g the software, it is recomme ded that you disable
all a ti-virus a d firewall software so it does ot i terfere with the
i stallatio . It ca be tur ed back o immediately after the i stallatio .
Place the Pyramid TimeTrax Software
CD into your PC. The software will
AUTORU . You will then see the below
setup screens. Follow the onscreen
instructions.
Clic NEXT to continue
Clic NEXT to continue
Enter a User Name and
Organization (optional)
and clic NEXT to
continue
Accept licensing
agreement and clic
NEXT to continue
Clic INSTALL to begin
installation

PYRAMID TIMETRAX MOBILE SERIAL QUICK START GUIDE
When installation is
complete, clic FINISH
and Restart your
computer.
CABLE INSTALLATION
PA TS EFE ENCE
Central PC
RJ45 to 9-pin (DB9) Adapter (included)
USB to RS232 Adapter (included)
7’ RJ45 Communication Cable (included)
TWO AVAILABLE OPTIONS FO CONNECTING THE PY AMID
TIMET AX SE IAL/USB TE MINAL TO YOU CENT AL PC
OPTION 1: PC HAS an available open Serial 9-pin (COM)
por . Connect the AC power supply (Fig. F) to a standard wall power
outlet (Fig. G) and to the TimeTrax terminal (Fig. E). Connect the white
RJ45 communication cable (Fig. D) to the RJ45/DB9 adapter (Fig. B).
This will then connect to the back of your PC. (Fig. A)
You are now finished installing the Pyramid TimeTrax software onto your
PC. We highly recommend restarting your computer before you proceed.
NOTE: Do ot co ti ue usi g the software u til the termi al(s) is
completely co ected with all cables a d power supply.
OPTION 1
OPTION 2
A
BD
D
CB
E
FG
1
4
7
2
5
8
0
3
6
9
ENTER
CLEAR
AE
F
G
B
C
D
TimeTrax Terminal (included)
AC Power Supply (included)
Wall Power Outlet
2

3
PYRAMID TIMETRAX MOBILE SERIAL QUICK START GUIDE
OPTION 2: PC DOES NOT HAVE an available open Serial 9-pin
(COM) por -or- only equipped wi h a USB por . Connect the AC
power supply (Fig. F) to a standard wall power outlet (Fig. G) and to the
TimeTrax terminal (Fig. E). Connect the white RJ45 communication cable
(Fig. D) to the RJ45/DB9 adapter (Fig. B) and then connect the RS232/USB
adapter (Fig. C) to the back of your PC. (Fig. A)
Please restart/reboot your PC before continuing
with the instructions.
CHA GING THE BATTE Y
Note: The TimeTrax Battery must be charged for 4 hours before
first time use.
Connect the AC Power to a 115-volt electrical outlet and the other end to
the TimeTrax Mobile charge port. During the charging process, the charge
light displays a constant green. Fully charged, the TimeTrax Mobile battery
life is 50 hours. The Sleep Mode offers battery conservation by automatically
shutting off after 15-minutes of non-use allowing longer periods between
recharges. Pyramid recommends frequent recharging.
When the TimeTrax Mobile is in Sleep Mode and an employee needs to
swipe, the On/Off switch needs to be turned off and then back on to bring
the unit back into ready mode. Sleep Mode does not move the switch to the
OFF position but it shuts dow the power as if it did.
If the battery runs low, the TimeTrax display will indicate LOW BATTERY.
If operation of the time recorder continues and the battery continues to
drain, the display will flash CHARGE BATTERY and will shut off after 10
seconds of flashing. However, punches/data will not be lost.
USING THE CA CHA GE
The Pyramid TimeTrax Mobile offers an Automotive Adapter/Car Charger
(Pyramid Part umber 42180) as an optional accessory to charge your bat-
tery on the go. Simply plug one end of the car charger into the TimeTrax
Mobile charge port and the other end into the car’s 12-volt accessory power
outlet/cigarette lighter for an instant charge. As with a 115-volt electrical
outlet charge, Pyramid recommends frequent recharging.
LOGGING INTO THE SOFTWA E FO THE FI ST TIME
Double clic the
Pyramid TimeTrax
ICON placed on your
des top to begin

4
PYRAMID TIMETRAX MOBILE SERIAL QUICK START GUIDE
LOGGING INTO THE SOFTWA E FO THE FI ST TIME
At this point, the Reference Guide and
online software wizards will walk you
through steps to get you up and running.
They will also teach you how to set the
time and date on the terminal, create
your employee database, print reports
and manage your time and attendance.
USING THE SOFTWA E AND EFE ENCE GUIDE
The “Reference Guide” can be accessed and printed from the Log In
screen as well as the software toolbar by selecting the ICO below.
You may also locate the Reference Guide from the software by selecting
Help and Reference Guide or by accessing our website
http://pyramidtechnologies.com/ProductManuals/default.asp.
Click the “Reference Guide” ICO to open the electronic PDF file of
the Software Users Guide. You will see complete steps and full directions
on how to use the Pyramid TimeTrax Software. The guide is always available
on the software screen toolbar. In addition, you can print this file out or
save it to your PCs hard drive. Note: Adobe PDF Reader is required to view
the refere ce guide a d ca be dow loaded from http://www.adobe.com.
If the recorder is connected correctly, the
Initial Communication Form will appear
with the message “Recorder Found”. If not,
check your cable connections as per the
installation diagram and click the
ReConnect button.
When the program is launched, you are
presented with the LOGIN screen shown.
The temporary User Name is “Admin”
The temporary Password is “PTI”.
PTI is case sensitive and must be
entered as directed.
Enter this information and clic the
LOGIN button in the center of the screen.

5
PYRAMID TIMETRAX MOBILE SERIAL QUICK START GUIDE
USING THE TIME ECO DE
The Pyramid TimeTrax M bile Time Rec rder is p wered by battery
and can easily be m ved fr m j b site t j b site s y ur Time Rec rder
is where y ur empl yees are! For employees traveling between multiple
job sites, employees can swipe in at one location and swipe out at an
entirely different one using the same card! Punches from each clock can be
downloaded into the software one at a time or simultaneously using the
Pyramid Multiplexer ( old eparately).
USING EMPLOYEE SWIPE CA DS
1. Insert the employee card at the top of the
slot on the right side of the time recorder.
The card must be held with the magnetic
stripe to the right and the card firmly in the
slot.
2. Rapidly pull the card down through the slot.
If the employee number is successfully read,
the time recorder will beep and the card
number will be displayed briefly on the
screen.
3. Keypad entry of employee numbers can be
done in lieu of employee cards.
DOWNLOADING PUNCHES
Single TimeTrax
M bile Unit:
Connect the hardware
as shown in the Cable
Installation Instructions.
Once connected, open
software and from the
Initial Communications
Form, verify that the
recorders are found and
select the Download
Punches box. If you have
multiple terminals, each
terminal will have to be
connected, one-at-a-time
to download the punches.
Successful
Connection
Select
Download
Punches
Need color
screen
Did not receive

45 Grace Ave., Meriden, CT 06451
www.ptitime.com I2208