Pyramid TIMETRAX EZ User manual

TTEZ
Quick Start Guide
User Guide available at pyramidtimesystems.com/resources/user-guides
Guía del usuario disponible en pyramidtimesystems.com/resources/user-guides
Guide de l’utilisateur disponible à pyramidtimesystems.com/resources/user-guides

What you will need.
Tape Measure Pencil Phillips Head
Screw Driver
Power Drill
(Optional)
TTEZ Terminal
TimeTrax™
Swipe Cards (25)
Part #41302 RJ45 Cable
TTEZ Quick
Start Guide
RJ45/USB
Connector
Security Bracket
& Key
Contents
Power
Supply
Mounting
Hardware
6
To mount terminal.
•Install mountingbracketswith tabs. Using
provided mounting screwsand drill template.
Be sure the four metaltabsare facingupward.
•Additionalholes are provided ifmounting onto
an electricalbox.
•Push terminal ontomountingbracket aligning
four tabs on bracket with four matching slots
on back of terminal. Be sure to write down
the terminal serial number before mounting,
slide terminaldownward until lockingtab
clicksintoplace. When properly mounted,
terminalcannot be removed from the bracket
without usingthe included wall bracket release
key todisengage lockingtab.
•Cables may be rooted through channelat base
of terminal or by drillinga hole in the rectan
gular section of the mountingbracket and
through the wall for concealingcables.
To detach terminal.
•Insert key (tab facing outward) intonarrow slot
located on bottom of terminalto right of cable
access cutout.
•Push key all the way up into slot. Key will slide
easily until last ½ inch until some resistance
from lockingtab is felt.
•With key fully pushed into slot, slide the termi-
nalup and off mountingbracket.
Mount Terminal

s
IMPORTANT:
Please write down serial #
located on back of terminal
before mounting.
Write your serial # here:
s
SAMPLE
Software Requirements
Single User installation,
Windows 8 or above
All Windows updates must be installed
prior to software installation
Must be Primary Admin
Regional settings & hardware
input in English
English
TM
TimeTrax™ Time & Attendance software should not
be installed on server PC’s.Pyramid Time Systems
does not support the use of TimeTrax™ software
on a server PC. For Multi User Upgrade, call
888.479.7264 Ext. 1.
Swipe card in the swipe channel from top tobottom.
If employee card numberis successfully read, the time clock terminalwill beep
Employee punches generated from swipe card are stored within the terminal.
The terminal stores the last 6,000 punchesbefore download is required.
Dependingupon usage, punchescan be retrieved on a more or less frequent
basis.
Using Time Clock
Connect Terminal
Connect eitherend of RJ45 cable into “SERIAL USB”port located on
the back of time clock terminal.
Connect free end of RJ45 cable tothe USB Adaptor .
Plug free end of USB Adaptor intoUBS port on PC.
Connect power supply into “POWER”port located in compartment on
back of terminal.
Route the cables through channelat base of terminal.
Mount terminal(see instructions below).
Plug power supply into outlet.
1
2
3
4
5
6
7
37
4
5
2
1

Download TimeTrax™ Software
Go topyramidtimesystems.com/support/videos/timetrax.
1
Click on TimeTrax™ Time & Attendance V5 Software/Start-up video.
2
3
Follow set-up instructions.
SUPPORTFEATURED RESOURCES
User Guides
Product Brochures
Product Catalog
Videos
FAQs
Tutorials
Glossary
Customer Support
Downloads
Upgrades
Product Registration
Warranty & Return
Videos
INDUSTRY APPLICATIONS
Type pyramidtimesystems.com/v5 into your internet browser.
1
Print and follow instructions on the "DESCRIPTION" tab.
2
NOTE: Software installation may take 15 minutes or longer.

Connect Terminal
Connect eitherend of RJ45 cable into “SERIAL USB”port located on
the back of time clock terminal.
Connect free end of RJ45 cable tothe USB Adaptor .
Plug free end of USB Adaptor intoUBS port on PC.
Connect power supply into “POWER”port located in compartment on
back of terminal.
Route the cables through channelat base of terminal.
Mount terminal(see instructions below).
Plug power supply into outlet.
1
2
3
4
5
6
7
37
4
5
2
1

Download TimeTrax™ Software
Go topyramidtimesystems.com/support/videos/timetrax.
1
Click on TimeTrax™ Time & Attendance V5 Software/Start-up video.
2
3
Follow set-up instructions.
SUPPORTFEATURED RESOURCES
User Guides
Product Brochures
Product Catalog
Videos
FAQs
Tutorials
Glossary
Customer Support
Downloads
Upgrades
Product Registration
Warranty & Return
Videos
INDUSTRY APPLICATIONS
Type pyramidtimesystems.com/v5 into your internet browser.
1
Print and follow instructions on the "DESCRIPTION" tab.
2
NOTE: Software installation may take 15 minutes or longer.
6
To mount terminal.
•Install mountingbracketswith tabs. Using
provided mounting screwsand drill template.
Be sure the four metaltabsare facingupward.
•Additionalholes are provided ifmounting onto
an electricalbox.
•Push terminal ontomountingbracket aligning
four tabs on bracket with four matching slots
on back of terminal. Be sure to write down
the terminal serial number before mounting,
slide terminaldownward until lockingtab
clicksintoplace. When properly mounted,
terminalcannot be removed from the bracket
without usingthe included wall bracket release
key todisengage lockingtab.
•Cables may be rooted through channelat base
of terminal or by drillinga hole in the rectan
gular section of the mountingbracket and
through the wall for concealingcables.
To detach terminal.
•Insert key (tab facing outward) intonarrow slot
located on bottom of terminalto right of cable
access cutout.
•Push key all the way up into slot. Key will slide
easily until last ½ inch until some resistance
from lockingtab is felt.
•With key fully pushed into slot, slide the termi-
nalup and off mountingbracket.
Mount Terminal
What you will need.
Tape Measure Pencil Phillips Head
Screw Driver
Power Drill
(Optional)
TTEZ Terminal
TimeTrax™
Swipe Cards (25)
Part #41302 RJ45 Cable
TTEZ Quick
Start Guide
RJ45/USB
Connector
Security Bracket
& Key
Contents
Power
Supply
Mounting
Hardware

Swipe card in the swipe channel from top tobottom.
If employee card numberis successfully read, the time clock terminalwill beep
Employee punches generated from swipe card are stored within the terminal.
The terminal stores the last 6,000 punchesbefore download is required.
Dependingupon usage, punchescan be retrieved on a more or less frequent
basis.
Using Time Clock
s
IMPORTANT:
Please write down serial #
located on back of terminal
before mounting.
Write your serial # here:
s
SAMPLE
Software Requirements
Windows 8 or above
All Windows updates must be installed
prior to software installation
Must be Primary Admin
Regional settings & hardware
input in English
English
TM
Operating System & Single User installation
TimeTrax™ Time & Attendance software should not
be installed on server PC’s.Pyramid Time Systems
does not support the use of TimeTrax™ software
on a server PC. For Multi User Upgrade, call
888.479.7264 Ext. 1.
RAM: 8GB or higher
Processor: 1.7 GHz minimum

Copyright © 2018 Pyramid Time Systems. All rights reserved.
I2206 Rev. M
Chat online
pyramidtimesystems.com
Call us
888.479.7264 EXT 1
Send us an email
[e-mail]