Python 513 User manual

Model 513
 Owner’s Guide

i
© 2009 Directed Electronics. All rights reserved.
Contents
Warning! Safety first ........................................................................................iii
What is included...............................................................................................1
Important information ........................................................................................1
System maintenance..................................................................................1
Your warranty...........................................................................................2
Fcc/id notice............................................................................................2
Caution ...................................................................................................2
Replacement remote controls ......................................................................2
Standard transmitter configuration.......................................................................3
Transmitter functions ..........................................................................................4
Standard configuration..............................................................................4
Using your system ............................................................................................6
Active arming...........................................................................................6
Passive arming .........................................................................................6
Multi-level security arming..........................................................................7
Arming while driving.................................................................................8
Disarming................................................................................................8
High security disarm .................................................................................8
Disarming without a transmitter...................................................................9
Silent mode..............................................................................................9
Panic mode............................................................................................10
Valet mode ............................................................................................10
Remote start ...................................................................................................11
Rear defogger........................................................................................12
Valet take-over........................................................................................13
Timer mode............................................................................................14
Short-run/turbo.......................................................................................14
Safety features................................................................................................15
Starter anti-grind circuitry.........................................................................15
Disabling the remote start system ..............................................................15
Shut down inputs ....................................................................................15
Nuisance prevention®circuitry ..........................................................................16
Diagnostics ....................................................................................................17
Arming diagnostics .................................................................................17
Disarming diagnostics .............................................................................17
System status chirps ................................................................................18
Table of zones ...............................................................................................19
Interpreting zone diagnostics....................................................................19
Code hopping ................................................................................................20
Owner recognition .........................................................................................20
Rapid resume logic..........................................................................................21
Power saver mode ..........................................................................................21

ii ©2009 Directed Electronics. All rights reserved.
Programming options ......................................................................................22
Security & convenience expansions ...................................................................24
Glossary of terms............................................................................................25
Quick reference guide .....................................................................................27
Limited lifetime consumer warranty ....................................................................29
Notes ............................................................................................................31

iii
© 2009 Directed Electronics. All rights reserved.
Warning! Safety first
The following safety warnings must be observed at all times:
Due to the complexity of this system, installation of this product must only be
performed by an authorized Directed dealer.
When properly installed, this system can start the vehicle via a command signal
from the remote control. Therefore, never operate the system in an enclosed area
or partially enclosed area without ventilation (such as a garage). When parking
in an enclosed or partially enclosed area or when having the vehicle serviced,
the remote start system must be disabled using the installed toggle switch. It is
the user’s sole responsibility to properly handle and keep out of reach from chil-
dren all remote control devices to assure that the system does not unintentionally
remote start the vehicle.
THE USER MUST INSTALL A CARBON MONOXIDE DETECTOR IN OR ABOUT
THE LIVING AREA ADJACENT TO THE VEHICLE. ALL DOORS LEADING
FROM ADJACENT LIVING AREAS TO THE ENCLOSED OR PARTIALLY EN-
CLOSED VEHICLE STORAGE AREA MUST AT ALL TIMES REMAIN CLOSED.
These precautions are the sole responsibility of the user.
Use of this product in a manner contrary to its intended mode of operation may
result in property damage, personal injury, or death. (1) Never remotely start the
vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with
the keys in the ignition. The user must also have the neutral safety feature of the
vehicle periodically checked, wherein the vehicle must not remotely start while
the car is in gear. This testing should be performed by an authorized Directed
dealer in accordance with the Safety Check outlined in the product installation
guide. If the vehicle starts in gear, cease remote start operation immediately and
consult with the authorized Directed dealer to fix the problem.
After the remote start module has been installed, contact your authorized dealer
to have him or her test the remote start module by performing the Safety Check
outlined in the product installation guide. If the vehicle starts when performing
the Neutral Safety Shutdown Circuit test, the remote start unit has not been
properly installed. The remote start module must be removed or the installer must

iv ©2009 Directed Electronics. All rights reserved.
properly reinstall the remote start system so that the vehicle does not start in gear.
All installations must be performed by an authorized Directed dealer.
OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN
GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPERAT-
ING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT
IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMMEDIATELY
CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AU-
THORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED
REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR
PAY FOR INSTALLATION OR REINSTALLATION COSTS.
This product is designed for fuel injected, automatic transmission ve-
hicles only. Use of this product in a standard transmission vehicle is
dangerous and contrary to the product's intended use.

1
© 2009 Directed Electronics. All rights reserved.
What is included
A control module•
An HX transceiver/antenna•
Two four-button transmitters•
A Stinger™ DoubleGuard• ®two-stage shock sensor
A Revenger™ Soft Chirp™ six-tone programmable siren•
A status LED indicator light•
A push-button Valet switch•
Your warranty registration•
A shut-down toggle switch•
Important information
Congratulations on the purchase of your combination remote start alarm system.
Due to the complexity of this system, it must be installed by an authorized dealer
only. Installation of this product by anyone other than an authorized dealer voids
the warranty. All dealers are provided with a preprinted dealer certificate to verify
authorization.
By carefully reading this Owner’s Guide prior to using your system, you will
maximize the use of this system and its features. You can print additional or
replacement copies of this manual by accessing our web site at
www.pythoncarsecurity.com.
➢System maintenance
The system requires no specific maintenance. Your remote is powered by a
small, lightweight 3-volt CR2032 battery that will last approximately one year
under normal use. When the battery begins to weaken, operating range is
reduced and the LED on the remote dims.

©2009 Directed Electronics. All rights reserved.
2
➢Your warranty
Your warranty registration must be completely filled out and returned within 10
days of purchase. Your product warranty will not be validated if your warranty
registration is not completed. Make sure you receive the warranty registration
from your dealer. It is also necessary to keep your proof of purchase, which
reflects that the product was installed by an authorized dealer. You can regis-
ter online at www.prodregister.com/directed or return the completed warranty
registration card.
➢Fcc/id notice
This device complies with Part 15 of FCC rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesirable operation. Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority
to operate this device.
➢Caution
This product is designed for fuel injected, automatic transmission vehicles only.
Use of this product in a standard transmission vehicle is dangerous and contrary
to the product’s intended use.
➢Replacement remote controls
If additional remote controls are desired, please see your authorized dealer or
visit www.directedstore.com to order.

3
© 2009 Directed Electronics. All rights reserved.
Standard transmitter configuration

controls Arm and Panic On/Off function

controls Disarm and Panic Off function
controls Silent Mode™ and Auxiliary trunk output
controls Remote start function

and

pressed together control Timer Mode

and
pressed together control 24 hr.
remote start Timer mode.

and and
pressed together control Temperature
start On/Off mode.
and
pressed together control Turbo/Short
Run

and
pressed together control Auxiliary 2
output

and
pressed together control Auxiliary 3
output.

and
pressed together control Auxiliary 4
output.

and and
pressed together control the Rear
defogger.

©2009 Directed Electronics. All rights reserved.
4
Transmitter functions
The receiver uses a computer-based Learn Routine to learn the transmitter but-
tons. The transmitter is initially programmed with Standard Configuration. The
buttons in all of the instructions in this manual correspond to a Standard Con-
figuration transmitter.
➢Standard configuration

Button
The arming function is controlled by pressing this button for 1 second, if held for
2 seconds Panic is activated.

Button
The disarming function is controlled by pressing this button for 1 second.
Button
Silent Mode™ and an optional auxiliary function are controlled by this button.
Silent Mode works by pressing it for less than one second before arming or dis-
arming. An optional auxiliary function, such as trunk release, can be controlled
by pressing this button for 1.5 seconds.
The auxiliary output controls __________________________.
Button
The remote start function of your system is controlled by pressing this button for
1 second.

and Buttons
An optional auxiliary convenience or expansion function that you have added
to your system can be activated by pressing these buttons simultaneously.
The auxiliary output controls __________________________.