Q-See QPD308 User manual

A. OPERATION NOTICES ：
（ 1 ） Keep away from water;
（ 2 ） Don't touch CCD with fingers,if necessary clean
and remove dust with soft cloth dipped in alcohol;
（ 3 ） If you have questions or problems,please contact Q-see.
C. INSTALLATION
：
IR DOME SERIES
COLOR CCD CAMERA
CCTV SYSTEM
D. DRAFT
：
F
、
SPECIFICATIONS
：
P1 P2 P2P2 P3
B. OPERATION PROCEDURES:
（ 1 ） Remove the cap cover from top of camera.
（ 2 ） Remove C converter when using CS lens.
（ 3 ） Screw on the lens.
（ 4 ） Connect the camera to a monitor or recording
device with a 75Ωcoaxial cable.
（ 5 ） Connect the camera to 12V DC power transformer.
（ 6 ） Modify the focus of lens to get an excellent image
when image appears on the screen.
（ 7 ） If object does not focus properly,when modifying focal length, please
try the following ：
a Set the lens focal ring at unfixed.
b Focus on an object which is far
away from the camera.
c Adjust the lens and focal ring to focus the
object until you get a clear image.
d Tighten the lens fix screw.
INSTALLATION PRECAUTIONS ：
（ 1 ） Do not install the camera where it is aimed at a strong light.
（ 2 ） Do not install the camera in a place where temperature
goes above 60℃(140°F),or there is high humidity or rain
（ 3 ） Do not install the camera in a place where it is subjected to vibration
or impact from other devices
（ 4 ） Cover the CCD if the camera will not be in use for a long time.
Digital Color CCD Camera
MANUAL
This camera uses a highly sensitive CCD
and full solid-state circuitry. It offers long
life, high reliablity and excellent image with
anti-burn ability. It is not subject to distortion
caused by magnetic fields. Easy to install, it
is an excellent choice for CCTV.
www.q-see.com
A. OPERATION NOTICES ：
（ 1 ） Keep away from water;
（ 2 ） Don't touch CCD with fingers,if necessary clean
and remove dust with soft cloth dipped in alcohol;
（ 3 ） If you have questions or problems,please contact Q-see.
（ b ） One monitor system with two or more cameras ：
（ a ） One monitor system with one camera ：
C. INSTALLATION ：
CAMERA
DVR
IR DOME SERIES
COLOR CCD CAMERA
CCTV SYSTEM
D. DRAFT ：
F 、 SPECIFICATIONS ：
Design and specifications are subject
to change without prior notice.
Printed in April 2009
P1 P2 P2P2 P3
P5 P6P4
扫描系统
同 步系统
视频输出
白平衡
成像系 统
像素
水平解析度
红外波长
红外距离
红外数量
信噪比
珈 玛
电子快门
最低照度
电源
镜头
功耗
操作温度
增益控制
红外灯自动开关
背光 补
镜头接口
NTSC:512(H) 492(V)
420TVL
Internal
Interlance2:1
NTSC: 1/50s~1/100000s
ON/OFF
0.45
1.0Vp-p 75ΩBNC
0.5Lux/0Lux (When IR LEDs On)
850nM
14m (45ft)
Day/Night
23PCS
On/Off
On/Off
C/CS
3.6mm
4W
200g (7oz)
-10
℃
～ +60
℃
(14°F to +140°F )
≥48dB
DC12V
B. OPERATION PROCEDURES:
（ 1 ） Remove the cap cover from top of camera.
（ 2 ） Remove C converter when using CS lens.
（ 3 ） Screw on the lens.
（ 4 ） Connect the camera to a monitor or recording
device with a 75Ωcoaxial cable.
（ 5 ） Connect the camera to 12V DC power transformer.
（ 6 ） Modify the focus of lens to get an excellent image
when image appears on the screen.
（ 7 ） If object does not focus properly,when modifying focal length, please
try the following ：
a Set the lens focal ring at unfixed.
b Focus on an object which is far
away from the camera.
c Adjust the lens and focal ring to focus the
object until you get a clear image.
d Tighten the lens fix screw.
INSTALLATION PRECAUTIONS ：
（ 1 ） Do not install the camera where it is aimed at a strong light.
（ 2 ） Do not install the camera in a place where temperature
goes above 60℃(140°F),or there is high humidity or rain
（ 3 ） Do not install the camera in a place where it is subjected to vibration
or impact from other devices
（ 4 ） Cover the CCD if the camera will not be in use for a long time.
Digital Color CCD Camera
MANUAL
This camera uses a highly sensitive CCD
and full solid-state circuitry. It offers long
life, high reliablity and excellent image with
anti-burn ability. It is not subject to distortion
caused by magnetic fields. Easy to install, it
is an excellent choice for CCTV.
1/4" Sony CCD
Scanning system
Sync System
Electronic Shutter time
White Balance
Image Sensor
Picture Elements
Horizontal Resolution
IR LEDs Wavelength
IR LDEs Distance
IR LEDs Amount
S/N Ratio
Gamma
Video Output
Usable Illumination
Power Supply
Lens
Power Consumption
Operating Temperature
AGC
IR LEDs Auto ON/OFF
BLC
Mount Lens
Weight
Video monitor
AC ADAPTOR
CAMERA
Video monitor
AC ADAPTOR
QPD308Model
www.q-see.com
*When IR LEDs on
A. OPERATION NOTICES ：
（ 1 ） Keep away from water;
（ 2 ） Don't touch CCD with fingers,if necessary clean
and remove dust with soft cloth dipped in alcohol;
（ 3 ） If you have questions or problems,please contact Q-see.
（ b ） One monitor system with two or more cameras ：
（ a ） One monitor system with one camera ：
C. INSTALLATION ：
CAMERA
DVR
IR DOME SERIES
COLOR CCD CAMERA
CCTV SYSTEM
D. DRAFT ：
F 、 SPECIFICATIONS ：
Design and specifications are subject
to change without prior notice.
Printed in April 2009
P1 P2 P2P2 P3
P5 P6P4
扫描系统
同 步系统
视频输出
白平衡
成像系 统
像素
水平解析度
红外波长
红外距离
红外数量
信噪比
珈 玛
电子快门
最低照度
电源
镜头
功耗
操作温度
增益控制
红外灯自动开关
背光 补
镜头接口
NTSC:512(H) 492(V)
420TVL
Internal
Interlance2:1
NTSC: 1/50s~1/100000s
ON/OFF
0.45
1.0Vp-p 75ΩBNC
0.5Lux/0Lux (When IR LEDs On)
850nM
14m (45ft)
Day/Night
23PCS
On/Off
On/Off
C/CS
3.6mm
4W
200g (7oz)
-10
℃
～ +60
℃
(14°F to +140°F )
≥48dB
DC12V
B. OPERATION PROCEDURES:
（ 1 ） Remove the cap cover from top of camera.
（ 2 ） Remove C converter when using CS lens.
（ 3 ） Screw on the lens.
（ 4 ） Connect the camera to a monitor or recording
device with a 75Ωcoaxial cable.
（ 5 ） Connect the camera to 12V DC power transformer.
（ 6 ） Modify the focus of lens to get an excellent image
when image appears on the screen.
（ 7 ） If object does not focus properly,when modifying focal length, please
try the following ：
a Set the lens focal ring at unfixed.
b Focus on an object which is far
away from the camera.
c Adjust the lens and focal ring to focus the
object until you get a clear image.
d Tighten the lens fix screw.
INSTALLATION PRECAUTIONS ：
（ 1 ） Do not install the camera where it is aimed at a strong light.
（ 2 ） Do not install the camera in a place where temperature
goes above 60℃(140°F),or there is high humidity or rain
（ 3 ） Do not install the camera in a place where it is subjected to vibration
or impact from other devices
（ 4 ） Cover the CCD if the camera will not be in use for a long time.
Digital Color CCD Camera
MANUAL
This camera uses a highly sensitive CCD
and full solid-state circuitry. It offers long
life, high reliablity and excellent image with
anti-burn ability. It is not subject to distortion
caused by magnetic fields. Easy to install, it
is an excellent choice for CCTV.
1/4" Sony CCD
Scanning system
Sync System
Electronic Shutter time
White Balance
Image Sensor
Picture Elements
Horizontal Resolution
IR LEDs Wavelength
IR LDEs Distance
IR LEDs Amount
S/N Ratio
Gamma
Video Output
Usable Illumination
Power Supply
Lens
Power Consumption
Operating Temperature
AGC
IR LEDs Auto ON/OFF
BLC
Mount Lens
Weight
Video monitor
AC ADAPTOR
CAMERA
Video monitor
AC ADAPTOR
QPD308Model
www.q-see.com
*When IR LEDs on