QNAP TVS-1672XU-RP User manual

TVS-x72XU
TVS-1672XU-RP
TVS-2472XU-RP
User Guide
Document Version: 1
08/01/2019

Contents
1. Preface
About This Guide.......................................................................................................................................... 3
Audience.......................................................................................................................................................3
Document Conventions................................................................................................................................ 3
2. Product Overview
About the TVS-x72XU.................................................................................................................................. 4
Hardware Specifications............................................................................................................................... 4
Package Contents........................................................................................................................................ 6
Components................................................................................................................................................. 7
Front Panel...............................................................................................................................................7
Rear Panel................................................................................................................................................8
System Board.........................................................................................................................................10
Drive Numbering.....................................................................................................................................12
Installation Requirements........................................................................................................................... 12
Setting up the NAS..................................................................................................................................... 13
3. Installation and Configuration
Hardware Installation.................................................................................................................................. 14
Drive Installation.....................................................................................................................................14
Expansion Unit Installation..................................................................................................................... 19
Hot-swapping Redundant Power Supply Units.......................................................................................20
Removing Expansion Cards...................................................................................................................22
Installing Expansion Cards.....................................................................................................................25
Rail Kits.................................................................................................................................................. 30
Replacing Memory Modules...................................................................................................................31
QTS Installation.......................................................................................................................................... 35
Installing QTS Using Qfinder Pro........................................................................................................... 36
Installing QTS Using the Cloud Key....................................................................................................... 37
4. Basic Operations
Power Button.............................................................................................................................................. 40
Reset Button............................................................................................................................................... 40
LEDs........................................................................................................................................................... 40
Beep Alarm................................................................................................................................................. 42
5. Troubleshooting
Forcing Qfinder Pro or myQNAPcloud to Locate the NAS......................................................................... 43
Hot-swapping Failed Drives........................................................................................................................43
Support and Other Resources.................................................................................................................... 43
6. Glossary
CloudKey.................................................................................................................................................... 45
CloudLink....................................................................................................................................................45
myQNAPcloud............................................................................................................................................ 45
myQNAPcloud ID........................................................................................................................................45
Qfinder Pro................................................................................................................................................. 45
QTS.............................................................................................................................................................45
7. Notices
TVS-x72XU User Guide
1

Limited Warranty.........................................................................................................................................46
Disclaimer................................................................................................................................................... 46
BSMI Notice................................................................................................................................................46
CE Notice....................................................................................................................................................47
FCC Notice................................................................................................................................................. 47
GNU Public License....................................................................................................................................47
SJ/T 11364-2006.........................................................................................................................................55
2

1. Preface
About This Guide
This guide provides information on the QNAP TVS-x72XU NAS and step-by-step instructions on installing
the hardware. It also provides instructions on basic operations and troubleshooting information.
Audience
This document is intended for consumers and storage administrators. This guide assumes that the user has
a basic understanding of storage and backup concepts.
Document Conventions
Symbol Description
Notes provide default configuration settings and other supplementary
information.
Important notes provide information on required configuration settings and other
critical information.
Tips provide recommendations or alternative methods of performing tasks or
configuring settings.
Warnings provide information that, when ignored, may result in potential loss,
injury, or even death.
TVS-x72XU User Guide
Preface 3

2. Product Overview
This chapter provides basic information about the QNAP TVS-x72XU NAS.
About the TVS-x72XU
Powered by an Intel® Core™ i3-8100 processor, the TVS-x72XU is an enterprise-class series NAS. The
series supports different disk storage configurations to better meet your virtualization and data storage
needs. It also features four Long-DIMM memory slots, scaling up to 64GB of memory, several expansion
card slots, and various input/output (I/O) ports for better scalability and flexbility.
Hardware Specifications
Warning
If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third-party
invalidates the warranty.
QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Ordering P/N CPU Memory Power supply
TVS-1672XU-RP-I3-8G Intel® Core™ i3-8100 8 GB Redundant
TVS-2472XU-RP-I5-8G Intel® Core™ i5-8500 8 GB Redundant
Component TVS-1672XU-RP TVS-2472XU-RP
Processor
CPU Intel® Core™ i3-8100 Intel® Core™ i5-8500
Frequency 4-core 3.6 GHz 6-core 3.0 GHz
Architecture x86 64-bit
Encryption engine AES-256
Memory
Pre-installed memory 8 GB RAM: 2 x 4 GB DDR4
Memory slots 4 x Long-DIMM DDR4
Important
Use only QNAP memory modules to maintain system
performance and stability. For NAS devices with more
than one memory slot, use QNAP modules with
identical specifications.
Using unsupported modules may degrade
performance, cause errors, or prevent the operating
system from starting.
Maximum memory 64 GB RAM: 4 x 16 GB
Flash memory 4 GB (dual boot OS protection)
Storage
Drive bays 16 x 3.5-inch SATA 6 Gbps bays 24 x 3.5-inch SATA 6 Gbps bays
TVS-x72XU User Guide
Product Overview 4

Component TVS-1672XU-RP TVS-2472XU-RP
Drive compatibility • 3.5-inch SATA hard disk drives
• 2.5-inch SATA hard disk drives
• 2.5-inch SATA solid-state drives
Important
2.5-inch drive trays only support drives with a
maximum height of 9.5 mm.
Network
10 Gigabit Ethernet ports 2 x 10 GbE SFP+ SmartNIC
Gigabit Ethernet ports 4 x GbE RJ45
External I/O Ports & Expansion Slots
PCIe slots • 1 x PCIe 2.0 (x4)
• 1 x PCIe 3.0 (x8)
• 2 x PCIe 3.0 (x4)
Note
A dual-port 10 GbE SFP+
network expansion card
is pre-installed on PCIe
3.0 slot 4.
• 1 x PCIe 3.0 (x8)
• 1 x PCIe 3.0 (x4)
• 3 x PCIe 2.0 (x4)
Note
A dual-port 10 GbE SFP+
network expansion card
is pre-installed on PCIe
2.0 slot 5.
Tip
For the list of compatible expansion cards, go to
https://www.qnap.com/compatibility.
USB ports • 2 x USB 3.1 Gen2 (10Gbps) 5V/3A Type-C
• 4 x USB 3.1 Gen2 (10Gbps) 5V/1A Type-A
HDMI ports 1 x HDMI 2.0 (up to 3840 x 2160 resolution at 60 Hz)
Interface
Buttons • Power
• Reset
Dimensions
Form factor 3U Rackmount 4U Rackmount
Dimensions (H x W x D) 130 x 481 x 573.5 mm
(5.12 x 18.94 x 22.56 in)
176.15 x 481.04 x 672.02 mm
(6.94 x 18.94 x 26.46 in)
Net weight 15.35 kg (33.84 lbs) 20.67 kg (45.57 lbs)
Others
TVS-x72XU User Guide
Product Overview 5

Component TVS-1672XU-RP TVS-2472XU-RP
Rail compatibility RAIL-A03-57 RAIL-A02-90
Note
• Rail kits are not included with the NAS and must
be purchased separately. For details, contact an
authorized reseller or go to http://shop.qnap.com.
• Information on rail kit installation can be found in
the installation guide included in the rail kit
package.
Power supply unit 2 x 500W, 100-240V AC, 50/60Hz 2 x 800W, 100-240V AC, 50/60Hz
System battery CR2032 lithium battery (3V, 225 mAh)
Warning
To avoid potential battery explosion, causing injury or
damage to components, ensure that you replace the
existing battery with a battery of the same type.
Important
Dispose of used batteries according to local
regulations or the instructions of the battery
manufacturer.
Sound level 49.7 db(A) 36.3 db(A)
Note
The sound level was tested at a bystander position,
which is within one meter of the NAS. The test NAS
operated at low speed with the maximum number of
drives installed.
Fans System: 4 x 92 mm, 12V DC
Warning
To avoid potential injury or damage to components, do
not touch the fans while the NAS is connected to a
power source.
Operating temperature 0˚C to 40˚C (32˚F to 104˚F)
Relative humidity • Non-condensing relative humidity: 5% to 95%
• Wet-bulb temperature: 27˚C (80.6˚F)
Tip
Model specifications are subject to change without prior notice. To see the latest
specifications, go to https://www.qnap.com.
Package Contents
Item Quantity
TVS-x72XU NAS 1
Power cord • TVS-1672XU-RP: 2
• TVS-2472XU-RP: 2
TVS-x72XU User Guide
Product Overview 6

Item Quantity
Ethernet cable 2
Screws for 2.5-inch drives TVS-1672XU-RP: 64
TVS-2472XU-RP: 96
Screws for 3.5-inch drives TVS-1672XU-RP: 64
TVS-2472XU-RP: 96
Quick Installation Guide (QIG) 1
Components
Front Panel
TVS-1672XU-RP, TVS-2472XU-RP
No. Component No. Component
1 Power button 4 Expansion unit LED
2 Status LED 5 Drive LEDs
3 LAN LED - -
TVS-x72XU User Guide
Product Overview 7

Rear Panel
TVS-1672XU-RP
No. Component No. Component
1 Ethernet port 4 (GbE RJ45) 9 PCIe 2.0 slot 1 (x4)
2 Ethernet port 3 (GbE RJ45) 10 Power supply unit 1
3 Ethernet port 1 (GbE RJ45) 11 Power supply unit 2
4 Ethernet port 2 (GbE RJ45) 12 HDMI port
5 Ethernet port 6 (10 GbE SFP+) 13 USB 3.1 Gen 2 Type-C ports
6 Ethernet port 5 (10 GbE SFP+) 14 USB 3.1 Gen 2 Type-A ports
7 PCIe 3.0 slot 3 (x4) 15 Reset button
8 PCIe 3.0 slot 2 (x8) - -
TVS-x72XU User Guide
Product Overview 8

TVS-2472XU-RP
No. Component No. Component
1 Ethernet port 6 (10 GbE SFP+) 9 HDMI port
2 Ethernet port 5 (10 GbE SFP+) 10 Reset button
3 PCIe 3.0 slot 4 (x8) 11 USB 3.1 Gen 2 Type-C ports
4 PCIe 2.0 slot 3 (x4) 12 USB 3.1 Gen 2 Type-A ports
5 PCIe 3.0 slot 2 (x4) 13 Ethernet port 2 (GbE RJ45)
6 PCIe 2.0 slot 1 (x4) 14 Ethernet port 4 (GbE RJ45)
7 Power supply unit 1 15 Ethernet port 3 (GbE RJ45)
8 Power supply unit 2 16 Ethernet port 1 (GbE RJ45)
TVS-x72XU User Guide
Product Overview 9

System Board
TVS-1672XU-RP
No. Component No. Component
1 PCIe 2.0 slot 1 (x4) 5 Memory slot 1
2 PCIe 3.0 slot 2 (x8) 6 Memory slot 2
3 PCIe 3.0 slot 3 (x4) 7 Memory slot 3
4 PCIe 3.0 slot 4 (x4)
Note
A dual-port 10 GbE SFP+ network
expansion card is pre-installed on
this PCIe slot.
8 Memory slot 4
TVS-x72XU User Guide
Product Overview 10

TVS-2472XU-RP
No. Component No. Component
1 PCIe 2.0 slot 1 (x4) 6 Memory slot 1
2 PCIe 3.0 slot 2 (x4) 7 Memory slot 2
3 PCIe 2.0 slot 3 (x4) 8 Memory slot 3
4 PCIe 3.0 slot 4 (x8) 9 Memory slot 4
5 PCIe 2.0 slot 5 (x4)
Note
A dual-port 10 GbE SFP+ network
expansion card is pre-installed on
this PCIe slot.
- -
TVS-x72XU User Guide
Product Overview 11

Drive Numbering
TVS-1672XU-RP
TVS-2472XU-RP
Installation Requirements
Category Item
Environment • Room temperature: 0˚C to 40˚C (32˚F to 104˚F)
• Non-condensing relative humidity: 5% to 95%
• Wet-bulb temperature: 27˚C (80.6˚F)
• Flat, anti-static surface without exposure to direct sunlight, liquids,
or chemicals
TVS-x72XU User Guide
Product Overview 12

Category Item
Hardware and peripherals • Storage drives
For details on compatible drives, go to https://www.qnap.com/
compatibility/.
• Network cable
Tools • Phillips #1 or #2 screwdriver
• Anti-static wrist strap
Setting up the NAS
1. Place your NAS device in an environment that meets the requirements.
For details, see Installation Requirements.
2. Install the drives.
For details, see the following topics:
•Installing 3.5-inch Hard Drives on 3.5-inch Trays
•Installing 2.5-inch Hard Drives or Solid State Drives on 3.5-inch Trays
3. Connect the power cord and all applicable cables.
4. Power on the NAS.
5. Install QTS.
For details, see QTS Installation.
6. Log on to QTS.
TVS-x72XU User Guide
Product Overview 13

3. Installation and Configuration
This chapter provides specific hardware and firmware installation and configuration steps.
Hardware Installation
This section provides information on installing drives, memory modules, and expansion cards.
Drive Installation
The TVS-x72XU is compatible with 3.5-inch and 2.5-inch hard drives, and 2.5-inch solid state drives.
Installing 3.5-inch Hard Drives on 3.5-inch Trays
Warning
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1. Power off the NAS.
2. Remove the drive tray.
a. Locate the lock.
b. Slide the lock to the left.
c. Push the gray button to release the handle.
d. Pull the tray out.
TVS-x72XU User Guide
Installation and Configuration 14

3. Install a drive on the tray.
a. Place the drive on the tray so that the holes on the side of the drive are aligned with the holes on
the side of the tray.
b. Attach the screws to lock the drive to the tray.
4. Load the tray into the bay.
a. Insert the tray into the drive bay.
b. Push the handle.
TVS-x72XU User Guide
Installation and Configuration 15

c. Slide the lock to the right.
5. Power on the NAS.
Installing 2.5-inch Hard Drives or Solid State Drives on 3.5-inch Trays
Warning
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1. Power off the NAS.
2. Remove the drive tray.
TVS-x72XU User Guide
Installation and Configuration 16

a. Locate the lock.
b. Slide the lock to the left.
c. Push the gray button to release the handle.
d. Pull the tray out.
3. Install a drive on the tray.
a. Place the drive on the tray so that the holes on the side of the drive are aligned with the holes on
the side of the tray.
b. Attach the screws to lock the drive to the tray.
TVS-x72XU User Guide
Installation and Configuration 17

4. Load the tray into the bay.
a. Insert the tray into the drive bay.
b. Push the handle.
c. Slide the lock to the right.
TVS-x72XU User Guide
Installation and Configuration 18

5. Power on the NAS.
Expansion Unit Installation
The TVS-x72XU supports SAS expansion units.
Type Description Required Accessories
SAS • Uses a SAS 12 Gbps interface
• Supports a maximum of eight
expansion units
• Supports SAS/SATA HDD/SSD
• SAS-12G2E storage expansion card
• mini-SAS SFF-8644 cable
• RAIL-A03-57 rail kit
Connecting SAS Expansion Units
The TVS-x72XU supports a maximum of eight SAS expansion units and is compatible with the following
models:
• REXP-1210U-RP
• REXP-1220U-RP
• REXP-1610U-RP
• REXP-1620U-RP
To use SAS expansion units, an SAS-12G2E storage expansion card must be installed on the NAS and
connected to the expansion units using mini-SAS SFF-8644 cables. You can purchase storage expansion
accessories from QNAP or an authorized reseller.
For details, go to https://shop.qnap.com/.
1. Install a storage expansion card on the PCIe slot.
For details, see Installing Expansion Cards
TVS-x72XU User Guide
Installation and Configuration 19