
© May 2006, ADIC 3
37231 CFL was not using the type field to determine if the log entry was owned by SOIP2.
36626 If there was no memory for a playback copy buffer, CFL was not printing an error
message.
36615 The setTimeHost command does not clear input string prior to new input
39587 SCSI Over IP: “No Device 6.14.21” message is displayed on SNC when an inquiry
command is send to an invalid device.
39534 Need to properly show serial numbers of targets in the mapShowDatabase output
39388 SNC 4000 not properly logging in to McData switch, which prevents the host from
discovering the Scalar 24 .
38542 uaQueue sending old UAs to host after PLOGI event.
38186 Drive dump was failing on the SNC 5101 and SNC 4000.
37913 CFL was throwing an exception when the log wrapped.
37811 mkRelease doesn’t stop if build component is unsuccessful.
37359 Add paCommandFlowLogEnabled variable to SANMgr MIB.
37237 When testing Enhanced Data Streaming, memory that was allocated by dsStart was
not released after dsStop.
37231 CFL was not using the type field to determine if the log entry was owned by SOIP2.
36626 If there was no memory for a playback copy buffer, CFL was not printing an error
message.
36615 The setTimeHost command does not clear input string prior to new input
36295 snmpSet error on AMC View Event Log with viewing level =0 (All Events).
36216 Command Flow Logging: Events for failed medium changer are not available if
changer doesn’t respond when SCSI Channel is rescanned.
36157 When testing Enhanced Data Streaming, the test report was displaying MBPS
instead of the number of Tape Writes completed.
36156 When testing Enhanced Data Streaming using two Fibre Channel ports concurrently
and with the SNC in Target mode, tape test errors were recorded.
36085 When the copy test tool or serverless backup sends an XCOPY command, the
Command Flow Logging (CFL) feature was not displaying a completion status.
36075 Request to pull SNC command logs using AMC interface.
35664 Want ability to reset a specified SCSI bus from the CLI and SNMP.
Change
Request
Number
Description