Queclink GB100MG Lite User manual

GB100MG User Manual
GPS Tracker
TRACGB100MGUM001
Version: 1.00

GB100MG User Manual
TRACGB100MGUM001 - 1 -
Document Title GB100MG User Manual
Revision 1.00
Date 2020-03-20
Status Release
Document Control ID TRACGB100MGUM001
General Notes
Queclink offers this information as a service to its customers, to support application and
engineering efforts that use the products designed by Queclink. The information provided is
based upon requirements specifically provided to Queclink by the customers. Queclink has not
undertaken any independent search for additional relevant information, including any
information that may be in the customer’s possession. Furthermore, system validation of this
product designed by Queclink within a larger electronic system remains the responsibility of the
customer or the customer’s system integrator. All specifications supplied herein are subject to
change.
Copyright
This document contains proprietary technical information which is the property of Queclink
Limited. The copying of this document and giving it to others and the using or communication of
the contents thereof, are forbidden without express authority. Offenders are liable to the
payment of damages. All rights are reserved in the event of grant of a patent or the registration
of a utility model or design. All specifications supplied herein are subject to change without
notice at any time.
Queclink
Confidential

GB100MG User Manual
TRACGB100MGUM001 - 2 -
Contents
Contents ............................................................................................................................................ 2
Table Index ........................................................................................................................................ 3
Figure Index....................................................................................................................................... 4
0. Revision History............................................................................................................................. 5
1. Introduction .................................................................................................................................. 6
1.1. Reference............................................................................................................................. 6
2. Product Overview.......................................................................................................................... 7
2.1. Check Parts List.................................................................................................................... 7
2.2. Parts List .............................................................................................................................. 8
2.3. Interface Definition ............................................................................................................. 8
3. Getting Started .............................................................................................................................. 9
3.1. Open the Case ..................................................................................................................... 9
3.2. Close the Case ................................................................................................................... 10
3.3. Install a SIM Card............................................................................................................... 11
3.4. Power Connection ............................................................................................................. 12
3.5. LED Status.......................................................................................................................... 13
3.6. Motion Sensor Direction ...................................................................................................14
5.Certification................................................................................................................................. 15
5.1. FCC Certification ................................................................................................................ 15
Queclink
Confidential
4.Bluetooth................................................................................................................................. 15

GB100MG User Manual
TRACGB100MGUM001 - 3 -
Table Index
Table 1. GB100MG Protocol Reference .............................................................................................6
Table 2. Parts List............................................................................................................................... 8
Table 3. Description of 2-Pin Power Cable ........................................................................................8
Table 4. Definition of Device Status and LED...................................................................................13
Queclink
Confidential

GB100MG User Manual
TRACGB100MGUM001 - 4 -
Figure Index
Figure 1. Appearance of GB100MG ..................................................................................................7
Figure 2. Open the Case .................................................................................................................... 9
Figure 3. Close the Case .................................................................................................................. 10
Figure 4. Install a SIM Card..............................................................................................................11
Figure 5. Typical Power Connection ................................................................................................ 12
Figure 6. GB100MG LED on the Case ..............................................................................................13
Figure 7. Motion Sensor Direction ..................................................................................................14
Queclink
Confidential

GB100MG User Manual
TRACGB100MGUM001 - 5 -
0. Revision History
Version Date Author Description of Change
1.00 2020-03-20 Young Chen Initial
Queclink
Confidential

GB100MG User Manual
TRACGB100MGUM001 - 6 -
1. Introduction
The GB100MG is a device designed for self-installation. It simply mounts directly onto the
vehicle’s battery with only two wires to attach. This approach allows for either a very low cost
installation or for the insurance customer to self-install. It’s built-in GNSS receiver has very high
sensitivity, a fast time to first fix and supports 10Hz location sampling during vehicle motion. It’s
buit-in Bluetooth can be used for data transmission. It’s multiband LTE Cat-M1 and Cat-NB1 allow
the GB100MG location to be monitored in real time or periodically tracked by a backend server
and mobile devices. It’s built-in 3-axis accelerometer allows motion detection, 100Hz pre/post
incident data collection, and extends battery life through sophisticated power management
algorithms. System integration is straightforward as complete documentation is provided for the
full featured @Track protocol. The @Track protocol supports a wide variety of reports including
emergency, geo-fence boundary crossings, low battery, and scheduled and compressed GNSS
position.
1.1. Reference
Table 1. GB100MG Protocol Reference
SN Document Name Remark
[1] GB100MG @Track Air Interface Protocol The air pro
tocol interface between
GB100MG and backend server.
Queclink
Confidential

GB100MG User Manual
TRACGB100MGUM001 - 7 -
2. Product Overview
2.1. Check Parts List
Before starting, check all the following items have been included with your GB100MG. If anything
is missing, please contact your supplier.
Figure 1. Appearance of GB100MG
Queclink
Confidential

GB100MG User Manual
TRACGB100MGUM001 - 8 -
2.2. Parts List
Table 2. Parts List
Name Picture
GB100MG Locator
2.3. Interface Definition
The GB100MG has a 2-pin power cable. The definition of the 2-pin power cable is shown below.
Table 3. Description of 2-Pin Power Cable
Index Colour Definition Description
1 Red VIN External DC power input, 8-32V
2 Black GND Ground
Queclink
Confidential

GB100MG User Manual
TRACGB100MGUM001 - 9 -
3. Getting Started
3.1. Open the Case
Remove 6pcs screws from the device, insert the triangular-pry-opener into the gap of the case
and push the opener up until the case is unsnapped.
Figure 2. Open the Case
Queclink
Confidential

GB100MG User Manual
TRACGB100MGUM001 - 10 -
3.2. Close the Case
Step_1: Put the motherboard into the front case, and make sure the silicon rubber seal ring is in
the gap of the front case and the power cable wire holder in the rubber groove of the rear case..
Step_2: Insert the battery connector into the socket.
Step_3: Place the cover on the bottom.
Step_4: Press the cover until it snaps into place and tighten the screws.
Figure 3. Close the Case
Queclink
Confidential

GB100MG User Manual
TRACGB100MGUM001 - 11 -
3.3. Install a SIM Card
Step_1: Open the case and pull out the battery connector from the socket to ensure the device is
not powered.
Step_2: Slide the holder to the left to open the SIM card holder.
Step_3: Put the SIM card on the holder with the gold-colour contact area facing down. Take care
to align the cut mark.
Step_4: Slide the holder to the right to close the SIM card holder.
Step_5: Close the case.
Figure 4. Install a SIM Card
Queclink
Confidential

GB100MG User Manual
TRACGB100MGUM001 - 12 -
3.4. Power Connection
VIN(PIN1) / GND (PIN2) are the power input pins. The input voltage range for this device is 8V to
32V. The device is designed to be installed in vehicles that operate on 12V/24V vehicle without
the need for external transformers.
Figure 5. Typical Power Connection
Note:
1. Do not connect any external cable on the GB100MG device.
2. The GB100MG simply mounts directly onto the vehicle’s battery with only two wires to attach.
It should be installed and operated with a minimum distance of 20cm from human body.
Queclink
Confidential

GB100MG User Manual
TRACGB100MGUM001 - 13 -
3.5. LED Status
Table 4. Definition of Device Status and LED
Device Status LED Status
Working normally Continuous on
PDP context not activated
Flashing pattern 1: 100ms On, 2s Off
Network not registered or SIM card
not inserted
Flashing pattern 2: 100ms On, 500ms Off, 100ms On, 2s
Off
GNSS location not fixed Flashing pattern 3
: 100ms On, 500ms off, 100ms On,
500ms Off, 100ms On, 2s off
PDP context not activated and GNSS
location not fixed
Flashing pattern 4: 100ms On, 2s Off, 100ms On, 500ms
Off, 100ms On, 500ms Off, 100ms On, 2s Off
Network not registered or SIM card
not inserted and GNSS location not
fixed
Flashing pattern 5: 100ms On, 500ms Off, 100ms On, 2s
Off, 100ms On, 500ms Off, 100ms On, 500ms Off, 100ms
On, 2s Off
Device power off or sleep mode Off
Figure 6. GB100MG LED on the Case
Queclink
Confidential

GB100MG User Manual
TRACGB100MGUM001 - 14 -
3.6. Motion Sensor Direction
GB100MG has an internal 3-axis accelerometer supporting driving behaviour monitoring and
motion detection. The following shows the directions of the motion sensor. The Z axis faces
outwards vertically.
Figure 7. Motion Sensor Direction
Queclink
Confidential
4. Bluetooth
The device role of Bluetooth could be Master and Slave.
When the device role is Slave, the device will provide below services: device information
service, battery information service, virtual serial port service. Other devices can read or
use these services after connecting devices.
When the device role is Master, the device will provide below services: the others devices
can read or use the above services after connecting devices, connect the designated
device to read the data or related information of the designated Bluetooth devices. After
reading the data, the server can be reported to the server by the corresponding message.

GB100MG User Manual
TRACGB100MGUM001 - 15 -
5.Certification
5.1. FCC Certification
The product contains a LTE module FCC ID: XMR201707BG96
FCC Compliance Statement
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This device complies with Part 15 of
the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:cor
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Queclink
Confidential