Queclink GV300TP 4G WW User manual

GV300TP User manual
TRACGV3SUM001 - 1 -
GV300TP 4G WW User Manual
EGPRS/LTE Cat-M1/LTE Cat-NB2/GNSS Tracker
QSZTGV300TPMGUM0100
Revision: 1.00

GV300TP 4G WW User Manual
QSZTGV300TPMGUM0100 - 2 -
Document Title
GV300TP 4G WW User Manual
Version
1.00
Date
2021-12-24
Status
Released
Document Control ID
QSZTGV300TPMGUM0100
General Notes
Queclink offers this information as a service to its customers, to support application and
engineering efforts that use the products designed by Queclink. The information provided is
based upon requirements specifically provided to Queclink by the customers. Queclink has not
undertaken any independent search for additional relevant information, including any
information that may be in the customer’s possession. Furthermore, system validation of this
product designed by Queclink within a larger electronic system remains the responsibility of the
customer or the customer’s system integrator. All specifications supplied herein are subject to
change.
Copyright
This document contains proprietary technical information which is the property of Queclink.
Copying of this document, distribution to others or using or communication of the contents
thereof is forbidden without express authority. Offenders are liable to the payment of damages.
All rights reserved in the event of grant of a patent or the registration of a utility model or design.
All specifications supplied herein are subject to change without notice at any time.
Copyright © Queclink Wireless Solutions Co., Ltd. 2021

GV300TP 4G WW User Manual
QSZTGV300TPMGUM0100 - 3 -
Contents
0. Revision History.............................................................................................................................4
1. Introduction ..................................................................................................................................5
1.1 Reference..............................................................................................................................5
1.2 Terms and Abbreviations......................................................................................................5
2. Product Overview..........................................................................................................................8
2.1. Check Parts List....................................................................................................................8
2.2. Parts List ..............................................................................................................................9
2.3. Interface Definition .............................................................................................................9
3. Getting Started............................................................................................................................12
3.1. Open the Case ...................................................................................................................12
3.2. Installing a SIM Card..........................................................................................................12
3.3. Device Status LED ..............................................................................................................12
4. CE Declaration .............................................................................................................................13

GV300TP 4G WW User Manual
QSZTGV300TPMGUM0100 - 4 -
0. Revision History
Revision
Date
Author
Description of change
1.00
2021-12-24
Eddy Qi
Initial

GV300TP 4G WW User Manual
QSZTGV300TPMGUM0100 - 5 -
1. Introduction
The GV300TP 4G WW is a powerful GPS locator designed for vehicle or asset tracking. It has
superior receiver sensitivity, fast TTFF (Time to First Fix) and supports EGPRS/LTE Cat-M1/LTE
Cat-NB2/GPS tracker. Its location can be monitored in real time or periodically tracked by a
backend server or other specified terminals. It has Bluetooth. The GV300TP 4G WW has multiple
input/output interfaces that can be used for monitoring or controlling external devices. Based on
the integrated @Track protocol, the GV300TP 4G WW can communicate with a backend server
through the network to transfer reports of emergency, geo-fence boundary crossings, low
backup battery and scheduled GPS position as well as many other useful functions. Users can
also use GV300 TP 4G WW to monitor the status of a vehicle and control the vehicle by its
external relay output. System integrators can easily set up their tracking systems based on the
full-featured @Track protocol.
1.1 Reference
Table 1.GV300TP 4G WW Protocol Reference
SN
Document name
Remark
[1]
GV300TPMG @Track Air Interface Protocol
The air protocol interface between
GV300TP 4G WW and backend
server.
1.2 Terms and Abbreviations
Table 2.Terms and Abbreviations
Abbreviation
Description
AIN
Analog Input
DIN
Digital Input
GND
Ground
RXD
Receive Data
TXD
Transmit Data

GV300TP 4G WW User Manual
QSZTGV300TPMGUM0100 - 8 -
2. Product Overview
2.1. Check Parts List
Before starting, check whether the product is intact. If anything is missing, please contact your
supplier.
Figure 1. Appearance of GV300TP 4G WW

GV300TP 4G WW User Manual
QSZTGV300TPMGUM0100 - 9 -
2.2. Parts List
Table 3.Parts List
Name
Picture
GV300TP 4G WW Locator
122*85.2*24.2 mm
Tracker Cable
OBD Cable
GPS Antenna (Optional)
Debug Cable (Optional)
2.3. Interface Definition
16-pin interface

GV300TP 4G WW User Manual
QSZTGV300TPMGUM0100 - 10 -
14-pin interface

GV300TP 4G WW User Manual
QSZTGV300TPMGUM0100 - 11 -

GV300TP 4G WW User Manual
QSZTGV300TPMGUM0100 - 12 -
3. Getting Started
3.1. Open the Case
Figure 2.Open the Case
Loosen the screws at the back of the device.
3.2. Installing a SIM Card
Open the case and ensure the unit is not powered (unplug the cable and unplug the internal
battery). Slide the holder to open the SIM card holder. Insert the SIM card into the slot. Take care
to align the cut mark. Close the SIM card holder. Close the case.
3.3. Device Status LED

GV300TP 4G WW User Manual
QSZTGV300TPMGUM0100 - 13 -
Note:
1. CEL LED cannot be configured.
2. GPS LED and PWR LED can be configured to turn off after a period of time by using the
configuration tool.
3. Fast flashing: for GSM LED is about 60 ms ON/780 ms OFF; for GPS LED and PWR LED is about
100 ms ON/100 ms OFF.
4. Slow flashing: for GSM LED is about 60 ms ON/1940 ms OFF; for GPS LED and PWR LED is
about 600 ms ON/600 ms OFF.
4. CE Declaration
Hereby, Queclink Wireless Solutions Co., Ltd. declares that the radio equipment type GPS tracker
is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
http://www.queclink.com/
LED
Device status
LED status
CEL
(Note 1)
Device is searching network.
Fast flashing
(Note 3)
Device has registered to network.
Slow flashing
(Note 4)
SIM card needs pin code to unlock.
ON
GPS
(Note 2)
GPS chip is powered off.
OFF
GPS sends no data or data format error occurs.
Slow flashing
GPS chip is searching GPS info.
Fast flashing
GPS chip has gotten GPS info.
ON
PWR
(Note 2)
No external power and internal battery voltage is lower
than 3.35V.
OFF
No external power and internal battery voltage is below
3.5V.
Slow flashing
External power in and internal battery is charging.
Fast flashing
External power in and internal battery is fully charged.
ON

GSM900: 32.85 dBm
GSM1800: 30.23 dBm
CATM
Band 1: 23.26 dBm
Band 3: 23.67 dBm
Band 8: 23.79 dBm
Band 20: 23.56 dBm
Band 28: 23.67 dBm
NB
Band 1: 23.55 dBm
Band 3: 23.88 dBm
Band 8: 23.52 dBm
Band 20: 23.99 dBm
Band 28: 23.39 dBm
Bluetooth Low Energy: 0.62 dBm
Tem:-30-80
This equipment complies with FCC and IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum
distance of 20 cm between the radiator and your body. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions:(1) this device may not cause harmful interference,and (2)this device must
accept any interference received,including interference that may cause undesired
operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help
- This device and its antenna(s) must not be co-located or operating in conjunction with
any other antenna or transmitter.