Quectel MC60 Guide

MC60
Reference Design
GSM/GPRS/GNSS Module Series
Rev. A
Date: 2016-05-30
www.quectel.com

GSM/GPRS/GNSS Module Series
MC60 Reference Design
MC60_Reference_Design Confidential / Released 1 / 4
Our aim is to provide customers with timely and comprehensive service. For any
assistance, please contact our company headquarters:
Quectel Wireless Solutions Co., Ltd.
Office 501, Building 13, No.99, Tianzhou Road, Shanghai, China, 200233
Tel: [phone]
Email: [email protected]om
Or our local office. For more information, please visit:
http://www.quectel.com/support/salesupport.aspx
For technical support, or to report documentation errors, please visit:
http://www.quectel.com/support/techsupport.aspx
Or email to: [e-mail]
GENERAL NOTES
QUECTEL OFFERS THE INFORMATION AS A SERVICE TO ITS CUSTOMERS. THE INFORMATION
PROVIDED IS BASED UPON CUSTOMERS’ REQUIREMENTS. QUECTEL MAKES EVERY EFFORT
TO ENSURE THE QUALITY OF THE INFORMATION IT MAKES AVAILABLE. QUECTEL DOES NOT
MAKE ANY WARRANTY AS TO THE INFORMATION CONTAINED HEREIN, AND DOES NOT ACCEPT
ANY LIABILITY FOR ANY INJURY, LOSS OR DAMAGE OF ANY KIND INCURRED BY USE OF OR
RELIANCE UPON THE INFORMATION. THE INFORMATION SUPPLIED HEREIN IS SUBJECT TO
CHANGE WITHOUT PRIOR NOTICE.
COPYRIGHT
THE INFORMATION CONTAINED HERE IS PROPRIETARY TECHNICAL INFORMATION OF
QUECTEL CO., LTD. TRANSMITTING, REPRODUCTION, DISSEMINATION AND EDITING OF THIS
DOCUMENT AS WELL AS UTILIZATION OF THE CONTENT ARE FORBIDDEN WITHOUT
PERMISSION. OFFENDERS WILL BE HELD LIABLE FOR PAYMENT OF DAMAGES. ALL RIGHTS
ARE RESERVED IN THE EVENT OF A PATENT GRANT OR REGISTRATION OF A UTILITY MODEL
OR DESIGN.
Copyright © Quectel Wireless Solutions Co., Ltd. 2016. All rights reserved.
Quectel
Preliminary

GSM/GPRS/GNSS Module Series
MC60 Reference Design
MC60_Reference_Design Confidential / Released 2 / 4
About the Document
History
Revision
Date
Author
Description
A
2016-05-30
Tiger CHENG
Initial
Quectel
Preliminary

GSM/GPRS/GNSS Module Series
MC60 Reference Design
MC60_Reference_Design Confidential / Released 3 / 4
Contents
About the Document...................................................................................................................................2
Contents.......................................................................................................................................................3
1Introduction..........................................................................................................................................4
1.1. Introduction................................................................................................................................4
1.2. Schematics................................................................................................................................4
Quectel
Preliminary

GNSS Module Series
MC60 Reference Design
MC60_Reference_Design Confidential / Released 4 / 4
1Introduction
1.1. Introduction
This document is a reference design for MC60 module. The schematics included in this document are
preliminary and are subject to change without prior notice.
1.2. Schematics
Quectel
Preliminary

Tiger CHENG MC60
2016/5/30
CHECKED BY
DRAWN BY
OF
A
65432
1
SHEET
A
B
C
D
123456
D
C
B
Quectel Wireless Solutions
PROJECT
SIZE
TITLE
VER
61
A
DATE
Reference Design
A2
Charge golden capacitor or battery when VBAT is applied.
3. The width of VBAT trace is recommeded to be more than 2mm.
2. Module drains the maximum current around 1.6A in burst time (577us).
If unused, keep VRTC open.
1. VBAT ranges from 3.3V to 4.6V.
Reference Circuit of ADC
Close to the VBAT pins
Capacitance of C102 should
is recommended here.
be chosen by debugging to ensure A 5.1V/1W zener diode
Module Design
As only powering the VRTC pin to keep the RTC will lead
an error for about 5 minutes a day, it is recommended
to power VBAT and VRTC pin at the same time when
RTC function is needed.
the max voltage drop during
the burst transmission
does not exceed 400mV.
The voltage range of ADC input channel is from 0 to 2.8V.
Please select a high-precision divider resistance.
4. Capacitance is arranged in ascending order, with the smallest one closing to the VBAT pins,
and all capacitance as close to the VBAT pins as possible.
A Pi match circuit is recommended to be added.
For RF layout, please refer to
RF_Layout_Application_Note.
Don't change those interface for other uses.
Active Antenna Power Supply Circuit
Active Antenna Power Supply CircuitAntennaType
Active
Passive
Need
No need
MC60 module does not support PCM / BT/SD card function
NOTE
B101 XH414
+
C101
NM_Golden capacitor
R104
R106
C103
1uF
C105
33pF
+
C102
470uF
C106
10pF
D101
1MICP
2MICN
3SPKP
4SPKN
5PWRKEY
6ADC
7SD_CMD
8SD_CLK
9SD_DATA
10 SIM2_CLK
11 SIM2_DATA
12 SIM2_RST
13 SIM2_VDD
14 GND
15 GNSS_ANT
16 SIM_GND 17 RESERVED 18 SIM1_VDD 19 SIM1_CLK 20 SIM1_RST 21 SIM1_DATA 22 GNSS_TXD 23 GNSS_RXD 24 RXD_AUX 25 TXD_AUX 26 GNSS_VCC 27 GND
28
GNSS_VCC_EN
29
DBG_TXD
30
DBG_RXD
31
GND
32
BT_ANT
33
TXD
34
RXD
35
RI
36
DCD
37
DTR
38
CTS
39
RTS
40
GND
41
RF_ANT
42
GND
43
VDD_EXT
44
GND
45
GND
46
RESERVED
47
NETLIGHT
48
GND
49
GND
50
VBAT
51
VBAT
52
VRTC
53
LOUDSPKN
54
LOUDSPKP
U101-A
MC60
55 RESERVED
56 RESERVED
57 RESERVED
58 RESERVED
59 PCM_CLK
60 PCM_OUT
61 PCM_SYNC 62
PCM_IN
63
RESERVED
64
RESERVED
65
RESERVED
66
RESERVED
67
RESERVED
68
RESERVED
U101-B
MC60
C107
NM
C108
NM
R101
0R
J101
RF_ANT
C111
NM
C112
NM
R103
0R
J103
GNSS_ANT
C115
100nF
C104
100nF
R107 0R
R108 0R
R109
10R
L1
47nH
[1]
VRTC
[1]ADC
VBAT
VOLTAGE_INPUT
[6]
DBG_RXD
[6]
DBG_TXD
[3] MICP
[3] MICN
[3] SPKP
[3] SPKN
[5,6] PWRKEY
[1] ADC
[4] SIM2_CLK
[4] SIM2_DATA
[4] SIM2_RST
[4] SIM2_VDD
[4] SIM1_VDD [4] SIM1_CLK [4] SIM1_RST
[4] SIM1_DATA
[2]
GNSS_VCC_EN
VCC_3V3
[3]
LOUDSPKP
[3]
LOUDSPKN
[1]
VRTC
VBAT
VDD_EXT
[1] GNSS_TXD [1] GNSS_RXD [5]
NETLIGHT
[6]
CTS
[6]
RTS
[1] RXD_AUX [1] TXD_AUX
[6]
DTR
[6]
TXD
[6]
RXD
[6]
RI
[6]
DCD
[4] SIM_GND
[1] GNSS_TXD [1]
RXD_AUX
[1] TXD_AUX [1]
GNSS_RXD
[1,2,6] VCC_3V3
Quectel
Preliminary

Tiger CHENG
CHECKED BY
DRAWN BY
OF
A
65432
1
SHEET
A
B
C
D
123456
D
C
B
Quectel Wireless Solutions
PROJECT
SIZE
TITLE
VER
62
A
DATE 2016/5/30
Reference DesignMC60
A2
LDO Application
DC-DC Application
The voltage converter should provide a minimum current of 2.0A.
It is used when the DC input voltage is below 7V.
1. It can be used when the input voltage is above 7V in vehicle application.
eg. DC12V IN DCDC DC 5V OUT LDO
DC 4V OUT FOR
2. Use DCDC to convert high input voltage to 5V and LDO will generate
4V & 3.3V typical voltage for the module.
DC input
Power Supply
NOTE
LDO DC 3.3V OUT FOR
GSM PART GNSS PART
+
C201
470uF
+
C203
470uF
R202
124K
R204
56K
C202
100nF
C204
100nF
R201
51K
Q201
DTC143ZETL
R203
470R
1
EN
2IN
3
GND
4
OUT
5
ADJ
U201 MIC29302/SPX29302
1VIN
2GND
3EN
5
VOUT
4
FB
U202
SGM2019-ADJYN5G/TR
+
C205
100uF
C208
100nF
C206
100nF
C207
4.7uF
R205
75K
R206
47K
R207
47K
VBAT
+5V
[5] POWER_ON/OFF
VCC_3V3
[1] GNSS_VCC_EN
Quectel
Preliminary

A
MC60
Tiger CHENG
CHECKED BY
DRAWN BY
OF
A
65432
1
SHEET
A
B
C
D
123456
D
C
B
Quectel Wireless Solutions
PROJECT
SIZE
TITLE
VER
63 DATE 2016/5/30
Reference Design
A2
Close to handset connector
Hands-free Application of AIN/AOUT2
NOTES
1. AGND is reommended to be routed separately.
2.10p&33p capacitors are used for filtering TDD noise.
Note 2
Close to MIC
Handsets Application of AIN/AOUT1
3. AIN has bias voltage of microphone.
Close to Socket
Close to Socket
Close to Socket
+
Earphone Application of AIN/AOUT2
Note 6
Note 6
6. These components are used to enhance the ESD performance of MIC lines,
and thus it is strongly recommended to reserve them.
Audio Design
Close to Speaker
4. AOUT1 is capable of driving 32ohm load.
5. AOUT2 is capable of driving 8ohm load and Earphone.
Note 1
4
1
3
2
J303
HANDSETCON
C322
33pF
C327
10pF
C328
33pF
C329
10pF
C330
33pF
C314
33pF
C316
33pF
C317
10pF
C315
10pF
C318
33pF
C313
10pF
C321
10pF
J301
MIC
C301
10pF
C302
33pF
C303
10pF
C305
10pF
C304
33pF
C306
33pF
1
2
3
4
J304
Earphone
C323
10pF
C324
33pF
C319
4.7uF
C325
10pF
C326
33pF
R303
0R
D307
ESD9B5.0ST5G
D308
ESD9B5.0ST5G
D309
ESD9B5.0ST5G
C320
22uF
D305
ESD9B5.0ST5G
D306
ESD9B5.0ST5G
D310
ESD9B5.0ST5G
D301
ESD9B5.0ST5G
D302
ESD9B5.0ST5G
1
2
J302
FB301
FBMH1608HM601-T
FB302
FBMH1608HM601-T
C309
10pF
C311
10pF
C307
10pF
C310
33pF
C308
33pF
C312
33pF
R301
0R
R302
0R
D303
ESD9B5.0ST5G
D304
ESD9B5.0ST5G
[1] SPKN
[1,3] MICP
AGND
AGND
[1] SPKP
[1,3] MICP
[1,3] MICN
[1,3] MICP
[1,3] MICN
[1,3] LOUDSPKP
[1,3] MICN
[1] LOUDSPKN
[1,3] LOUDSPKP
Quectel
Preliminary

Tiger CHENG
CHECKED BY
DRAWN BY
OF
A
65432
1
SHEET
A
B
C
D
123456
D
C
B
Quectel Wireless Solutions
PROJECT
SIZE
TITLE
VER
64
A
DATE 2016/5/30
Reference DesignMC60
A2
SIM Card Interface
NOTES
1. The value of C401 and C402 should be less than 1uF.
2. U401 and U402 is used for protecting SIM card against ESD, and the junction capacitance should be less than 50pF.
3. For MC60 module, ground of SIM card is recommended to be routed to the Pin 16("SIM_GND") of the module separately.
It should be placed nearby SIM card holder.
Note1
Note2
Note3
SIM Card
Note1
Note2
Note3
R403 22R
R405 22R
R407 22R
C401 100nF
1
2
3
4 5
6
U401
NUP5150MUTBG
1
GND
2
VPP
3
I/O
4CLK
5RST
6VCC
J401
C403
33pF
C405
33pF
C406
33pF
C404
33pF
R401
NM
R404 22R
R406 22R
R408 22R
C402 100nF
1
2
3
4 5
6
U402
NUP5150MUTBG
1
GND
2
VPP
3
I/O
4CLK
5RST
6VCC
J402
C407
33pF
C409
33pF
C410
33pF
C408
33pF
R402
NM
[1,4] SIM1_VDD
[1,4]
SIM_GND
[1] SIM1_RST
[1] SIM1_CLK
[1] SIM1_DATA
SIM1_VDD
[1,4]
SIM_GND
[1] SIM2_RST
[1] SIM2_CLK
[1] SIM2_DATA
SIM2_VDD
[1,4] SIM2_VDD
Quectel
Preliminary

Tiger CHENG
CHECKED BY
DRAWN BY
OF
A
65432
1
SHEET
A
B
C
D
123456
D
C
B
Quectel Wireless Solutions
PROJECT
SIZE
TITLE
VER
65
A
DATE 2016/5/30
Reference DesignMC60
A2
LED Indication
Pin "NETLIGHT" indicates the network status.
Driver
Recommended circuit for turning on/off the module.
Turn on/off
MCU
MCU GPIO
R501
1K
D501
1
GPIO
2
GPIO
3
GPIO
Q503
DTC143ZETL
Q501
DTC143ZETL
[1] NETLIGHT
VBAT
[1,6]
PWRKEY
[5]PWRKEY_CONTROL
[2]
POWER_ON/OFF
[5] PWRKEY_CONTROL
Quectel
Preliminary