Quoizel RAD8407MBK User manual

1of3
2019 QuoizelInc.
visit us on-line at www.quoizel.com
ReleasedDate:2019-07-08
For Styles RAD8407MBK and RAD8410MBK
Installation Guide
LightSource
ToolsRequired
Warnings and Cautions
Turn off the electricity at the circuit breaker before installation.
Consult a licensed electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs to cool before
replacing.
Crossbar
Assembly
x1
A
Package Contents
PARTS BAG
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Glass Shade
x1
F
Crossbar Assembly Wiring Bulb &
Glass Shade
Table of
Contents
STEP 2 STEP 3 STEP 5
Fixture Body
STEP 4
Caulk
STEP 6
Alternate
Mounting Screw
STEP 1
Alternate
Mounting Screw
x2
B
Outlet Box Screw
x2
C
Wire Connector
x3
D
Fixture Body
x1
E
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
1BULBREQUIRED
BULBNOTINCLUDED
100W
MAX

2of3
2019 QuoizelInc.
visit us on-line at www.quoizel.com
ReleasedDate:2019-07-08
STEP 1
OPTION 1 OPTION 2
Included
(Pre-assembled)
Included
Standard
Mounting
Screw
Alternate
Mounting
Screw
skip to next page
1 2 3
Steps 1-3 to remove standard mounting screws
56
Steps 4-6 to reassemble with alternate mounting screws
4
STEP 2
1 2 3
Step 1
Install crossbar assembly
Step2-3
Test fitting backplate to mounting screws
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 3
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box

3of3
2019 QuoizelInc.
visit us on-line at www.quoizel.com
ReleasedDate:2019-07-08
STEP 4
STEP 5
STEP 6
Exterior Caulk