Quoizel BURD8415AC User manual

- of 2 -1
INSTALLATION GUIDE FOR BURD8415AC
CARE AND MAINTENANCE
SAFETY INFORMATION Released Date: 2021-10-29
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage
the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at
www.quoizel.com.
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED
PACKAGE CONTENTS
MOUNTING HARDWARE
AA Inner Backplate
x 1 BB Mounting Screw x2 CC Wire Connector x 3 DD Outlet Box Screw x2
AFixture Body
x 1

- of 2 -2
INSTALLATION
1
Install Inner Backplate
Option 1
2
Install Lanyard
Lanyard
Button Stop
3
Wiring
White wire from supply White from fixture
Black (or red) wire from supply Black from fixture
Ground wire from supply
Ground wire
from fixture
Green ground screw
4
Install Fixture Body
5
Remove Papers inside of the Cage
6
Install Bulbs
Install correct bulbs referringthree
to fixture markings and/or labels for
maximum wattage.
Recommended Bulb Type (not
included):
Paper (Remove)
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
Remove door bolt
from bolt holder
Open the door and
remove paper inside

- of 2 -3
INSTALLATION
7
Close the Door
Close the door
Place door bolt back
onto bolt holder
8
Apply Caulking
ECxterior aulk
* Note: Do NOT caulk the bottom of the backplate to
allow moisture to escape.
ECxterior aulk
ECxterior aulk
Option 2
1
Remove Backplate from Fixture Body
2
Reinstall Backplate to Fixture Body
Go to step 1 - step 8 of option 1 to complete the rest installations.
Your installation is now complete! Restore electricity and save this sheet for future reference.