Quoizel MOI8408EK User manual

Mounting Screw
x 2
DD
SAFETY INFORMATION
Fixture Body
x 1
INSTALLATION GUIDE FOR MOI8408EK and MOI8409EK
Released Date: 2021-01-28
CARE AND MAINTENANCE
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am – 5:00pm EST), or visit us on-line at www.quoizel.com.
PACKAGE CONTENTS MOUNTING HARDWARE
AInner Backplate
x 1
AA
Outlet Box Screw
x 2
CC
Wire Connector
x 3
BB
- 1 -
1
INSTALLATION
Remove paper
32
Install Inner Backplate

INSTALLATION
REPLACE GLASS PANEL
Rectangle/Square Backplate Round Backplate
5
Your installation is now complete! Restore electricity and save this sheet for future reference.
Apply Caulking (Backplate shape is varies depends on items
purchased)
*Note: Do NOT caulk the bottom of the backplate to allow
moisture to escape.
4
Green ground screw
Black (or red) wire from supply
Ground wire from supply
White from fixture
Black from fixture
Ground wire
from fixture
White wire from supply
3
Wiring
Exterior Caulk Exterior Caulk
Exterior Caulk
Exterior Caulk
Exterior Caulk
Exterior Caulk
- 2 -
Install one correct bulb referring to fixture markings and/or
labels for maximum wattage.
Recommended Bulb type (not included):
6
Install Bulb
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
Install Fixture Body
1
Remove the damaged Glass Panel Reverse above steps to reinstall the
replacement Glass Panels onto fixture.