Racelogic RLVBDSP04 User manual

- 1 -
12/06/09
OLED Display Manual
RLVBDSP04
RLVBDSP05
OLED DISPLAY INSTRUCTION MANUAL
(RLVBDSP04, RLVBDSP05–F, RLVBDSP05–L, RLVBDSP05-M and RLVBDSP05–H)

- 2 -
12/06/09
OLED Display Manual
Contents
OLED Setup ............................................................................................................................4
Video VBOX Pro / LITE / Waterproof ..................................................................................4
VBOX Micro/ Performance Box Sport .................................................................................4
VBOX3i/ VBOX3/ VBSX/SL...................................................................................................4
Display Modes .......................................................................................................................5
Speed .................................................................................................................................5
Logging Status..................................................................................................................5
Max Speed..........................................................................................................................5
Max Speed Reset .............................................................................................................5
Lap timing...........................................................................................................................5
Split line display ...............................................................................................................6
Setting a Start/finish line .................................................................................................6
Predictive Lap Timing .........................................................................................................7
Lap Count Display ...............................................................................................................7
Setup Menu Options - MENU.................................................................................................8
Multiple Scene Selection ....................................................................................................8
Auto Track Map Selection...................................................................................................8
About .................................................................................................................................9
Predictive Lap Timing Settings ............................................................................................9
Bar Range ........................................................................................................................9
Transfer Ref. Lap to VVB ..................................................................................................9
Speed Units ......................................................................................................................10
Rolling Lap Time ...............................................................................................................10
Split to Split time ..............................................................................................................10
Split Time Display Period ..................................................................................................10
One Shot Mode ................................................................................................................11

- 3 -
12/06/09
OLED Display Manual
Set Start & Splits...............................................................................................................11
Reset Laptiming Data........................................................................................................12
Clear Start & Splits............................................................................................................12
Brightness.........................................................................................................................12
Invert Screen Colour.........................................................................................................12
Use Outline Font...............................................................................................................12
Memory usage..................................................................................................................... 12
Power Supply.......................................................................................................................12
Upgrading the OLED Display firmware................................................................................. 13
Upgrade OLED through Video VBOX.................................................................................13
Performing the Upgrade using a PC..................................................................................13
Troubleshooting ..................................................................................................................14
Connector Assignments & Specifications .............................................................................15
Contact Details ....................................................................................................................17
Document Updates.............................................................................................................. 17

- 4 -
12/06/09
OLED Display Manual
OLED Setup
Video VBOX Pro / LITE / Waterproof
When setting up the DSP04 OLED display with a Video VBOX, it is
important to connect to the correct port of the OLED display. The OLED
display only has a serial connection on the lower connector, with the
buttons on the right hand side - as shown in this picture.
The configuration is indicated on a label on the rear of the OLED display.
To connect to a Video VBOX Lite, you should connect the cable into the
‘AUX’ port.
To connect to a Video VBOX Pro, you should connect the cable into the ‘SER’ port.
Note: For older 2CAM Video VBOX units –use the ‘DATA’ port.
To connect to a Video VBOX Waterproof, you should connect the cable into the ‘SER’ port.
VBOX Micro/ Performance Box Sport
As with the Video VBOX, the serial connector must be used when connecting to these units.
VBOX3i/ VBOX3/ VBSX/SL
Connection to the OLED display from any of these units can be made to either port on the OLED.

- 5 -
12/06/09
OLED Display Manual
Display Modes
The OLED display has different display modes that are accessed using the up and down buttons. The data displayed
on each screen is calculated at all times, even if it is not currently displayed.
Speed
In this mode the screen will display a large clear speed value to 2 decimal
places, including the units, mph or km/h. The number of decimal places
displayed can be adjusted through the OLED menu.
Logging control
To start or stop the VVB logging data, press the button when in Speed Display mode.
Logging Status
If the VBOX is logging, the OLED display will indicate this by scrolling a bar across the bottom of the screen.
Max Speed
In this mode the screen will show the highest achieved speed value to 0, 1 or 2 decimal places.
Max Speed Reset
If the button is pressed then the unit will reset the displayed maximum speed value.
Lap timing
All lap times and split times are interpolated to 0.01 second resolution. If start/finish and splits have been setup in
the Video VBOX scene, they will be automatically transferred to the OLED display when connected. Check the OLED
shows a message confirming successful transfer of start/finish and split information.
In this mode the screen can display
either a live rolling lap time or a
static last lap time and the lap
count. This is set from within the
menu screen.

- 6 -
12/06/09
OLED Display Manual
Fastest Lap
The difference between the new lap time and the best lap time will be shown with a + or –sign. A ‘–’ is shown when
a faster than best is achieved and a ‘+’ is shown for a slower than best.
Split line display
If split lines have been set inside the OLED display then it will display the split time for between 2 and 20 seconds (as
configured) when the split line is crossed.
Setting a Start/finish line
In the lap timing screen a new start/finish line can be set by pressing the button. If split lines or a separate finish
are also required, then use the ‘set start finish and splits’ option in the main menu (see ‘Set Start and Splits’ section
for more information).
To cancel, press the ▼button within 5 seconds.
Note: You must be moving >0.5km/h for this function.

- 7 -
12/06/09
OLED Display Manual
Predictive Lap Timing
To use this, the OLED must have start/finish information set, or an Auto Track-Map element in the VVB scene.
Until the start line is crossed, the screen will show ‘Waiting For Start Line’.
On the first lap, the OLED will create a reference lap.
The reference lap will be replaced with any subsequent quicker lap time. If you wish to fix this comparison lap time
at any point, then this can be done by pressing the button.
If you wish to save or load a reference lap file, please see the ‘Predictive Lap Timing Settings’ section of this manual.
Reference laps will be reset when either a new Start/Finish is set, or if the ‘Reset Laptiming Data’ option is selected
in the main menu.
The main predictive screen shows a continuously updated bar graph with the +/ - to previous. When a lap is
completed, it will give a final lap time and total time difference to reference lap.
If you achieve a faster time than your reference, a negative time will be shown.
The amount of time shown on the bar graph can be altered in the main menu to 2, 5, 10 or 30 seconds.
Lap Count Display
The lap count screen will display two lap counts. On the left hand side of the screen the total lap count is displayed –
this counter will only be reset by a power cycle of the OLED display. The right hand side of the screen displays the
current laps and will be reset by removal of the logging media from the VBOX unit –SD card or USB stick.

- 8 -
12/06/09
OLED Display Manual
Setup Menu Options - MENU
The OLED display menu is accessed by pressing the button when the ‘Menu’ screen is shown. The menu can be
navigated with the▲and▼buttons.
Multiple Scene Selection
The Video VBOX can store up to 8 user defined scenes. They are loaded by placing them in the root folder of an SD
card and inserting them into a VVB. The user can select the scene using an
OLED display.
Once selections of scene files have been loaded onto a Video VBOX, when the OLED is first powered up a screen will
display prompting to select a scene.
If the ▼ button is pressed at this point, the OLED will show a list of scenes
available for selection.
Once the OLED is powered and in use, scene selection can always be accessed
through the main menu.
Auto Track Map Selection
If an Auto Track Map element has been added to the scene currently loaded in the Video VBOX, the OLED can be
used to specify which track layout to display.
Once a GPS location is detected, the VideoVBOX will display a circuit layout for that location –
e.g. If Silverstone location detected, Silverstone GP, National and International layouts will be displayed.
The layout, can be chosen through the main menu of the OLED as shown below.
For more information on how automatic track map elements work, and loading them into a Video VBOX, see the
Video VBOX Setup software manual.
Load Ref lap from
VVB

- 9 -
12/06/09
OLED Display Manual
About
In this section you can find serial numbers and firmware versions installed in the
OLED and connected VVB unit.
Predictive Lap Timing Settings
Bar Range
This setting alters the amount of +/- time shown on the bar graph during lap prediction. Either 2, 5, 10 or 30 seconds
can be chosen. Press to when bar range is highlighted to scroll through different time options.
Transfer Ref. Lap to VVB
This feature allows the user to save a reference lap for future use, insert an SD card into the connected VVB unit and
use the menu options shown below. Note that the vehicle must be stationary to make this transfer.
Once this is selected, the following messages show saving has been successful.
There will now be a file named OLED.REF on the SD card which you can save to your PC.
Load Ref.Lap from VVB
To load a reference lap file stored from a previous session, put the desired file onto an SD card and load the card into
VVB. The file must be named OLED.REF and placed in the root directory of the SD card.
Select the menu options as shown below. Note that the vehicle must be stationary to make this transfer.
The messages below indicate that the reference file has loaded correctly.

- 10 -
12/06/09
OLED Display Manual
Speed Units
If the button is pressed the OLED display allows the user the ability to select the units of the displayed speed.
Highlight the desired measurement type and press to select.
Speed Decimal Places
Pressing the button will cycle through 0, 1, and 2 decimal places.
Rolling Lap Time
This function shows a continuously counting lap time which briefly freezes as the start/finish line is crossed.
Split to Split time
When this option is selected then the calculated split times will be split to split and not accumulative from the start
of the lap.
Split Time Display Period
This function allows you to set how long the split time is shown for on the OLED display when a split line or the
start/finish line is crossed. There is a choice of: 2s, 5s, 10s, 15s or 20s.
Press
Select
Exit
and
Press
Press