Racelogic VBOX LapTimer User manual

VBOX Laptimer - Quick Start
Connect a 12 V power source and GPS antenna to the
VBOX LapTimer.
Place the GPS antenna in the middle of the vehicles
roof.
When satellites have been acquired, the VBOX
LapTimer will check the GPS location against
Racelogic’s track map database and load the layouts
available.
https://en.racelogic.support//Product_Info/Lap_Timing_and_Pit_Timing/VBOX_LapTimer/Quick_Start_Guide/VBOX_Laptimer_-
_Quick_Start
1

The user must select the layout they are driving through
the main menu.
When the correct layout is selected, exit the menu and
move to the ‘Predictive Lap Timing’ screen using the
arrow keys.
Start driving! When the start line is crossed for the first
time, a reference lap will be created.
When the start line is crossed again, a live delta-T
display will be shown, comparing the current lap time to
the reference lap time.
The two front LEDs will indicate if the vehicles speed is
currently faster (green) or slower (red) in comparison to
reference lap speed.
If a faster lap time is achieved, this will automatically
replace the reference lap, so VBOX LapTimer is always
comparing to the best time.
https://en.racelogic.support//Product_Info/Lap_Timing_and_Pit_Timing/VBOX_LapTimer/Quick_Start_Guide/VBOX_Laptimer_-
_Quick_Start
2