RADICAL R - D111 Owner's manual

MAIN MANUAL
R-D210
MAIN MANUAL
R-D111

23
SAFETY
WARNING
Driver distraction can lead to accidents and injuries.
Operating the RADICAL system may distract the driver’s attention from the prevailing traffic conditions!
Connecting, changing or inserting data carriers may equally distract the driver’s attention from the
prevailing traffic conditions.
WARNING
Always ensure that loudspeaker volume allows sounds from outside the vehicle to be heard at all
times (e.g. signal horns or sirens).
WARNING
Incorrect assembly or installation of the RADICAL system may result in damage to the RADICAL
system or to the vehicle electronics. The device should only be installed by qualified personnel,
authorized by RADICAL.
CAUTION
This RADICAL system is intended solely for operation with an on-board voltage of 12 V DC. Operating
the RADICAL system at any other onboard voltage may result in damage to the RADICAL system or
to the vehicle electrical system.
CAUTION
Dismantling or modifying the RADICAL system may result in damage to the device or the vehicle.
Opening or modifying the device by personnel not authorized by RADICAL will invalidate the warranty.
In the event of a malfunction or fault, please contact an authorized RADICAL dealer.
CAUTION
Charging and connecting cables for mobile devices may cause an obstruction to the driver.
These should be positioned to ensure that the driver’s movement is not impeded.
CAUTION
The driving recommendations and traffic signs displayed on the RADICAL system may differ from the
actual situation. Traffic signposts and traffic regulations take precedence over the driving
recommendations and signs displayed on the RADICAL system.
Adapt your driving behaviour and speed to the prevailing visibility, weather, road and traffic conditions.
TABLE OF CONTENTS
SAFETY
DEVICE ON/OFF
AUTOMATIC ON/OFF
HOME SCREEN
HOME SCREEN NAVIGATION
APPS AND WIDGETS
APPS
WIDGETS
TUNER APP
MEDIA / MUSIC
MEDIA / VIDEO
BLUETOOTH
PAIRING A BLUETOOTH DEVICE
DEVICE MANAGER FUNCTIONS
PHONE BOOK FUNCTIONS
BLUETOOTH MUSIC (A2DP) FUNCTIONS
CALL HISTORY FUNCTIONS
NUMBER PAD FUNCTIONS
EASY CONNECTION
CONNECTION SCREEN
ANDROID USB CONNECTION (INITIAL CONNECTION)
Wi-Fi CONNECTION (INITIAL CONNECTION)
APK INSTALLER
SETTINGS
NETWORK & INTERNET
CAR INFOTAINMENT
COMMON
DISPLAY
VOLUME
AUDIO SETTINGS
VIDEO
NAVIGATION
BLUETOOTH
SWC
ABOUT DEVICE
APPS & NOTIFICATIONS
STORAGE
MEMORY
USERS & ACCOUNTS
SYSTEM
TROUBLESHOOTING
STATUTORY RIGHTS AND WARRANTY
INSTALLATION NOTES
TABLE OF CONTENTS
SAFETY
DEVICE ON/OFF
AUTOMATIC ON/OFF
HOME SCREEN
HOME SCREEN NAVIGATION
APPS AND WIDGETS
APPS
WIDGETS
TUNER APP
MEDIA /MUSIC
MEDIA /VIDEO
BLUETOOTH
PAIRING A BLUETOOTH DEVICE
DEVICE MANAGER FUNCTIONS
PHONE BOOK FUNCTIONS
BLUETOOTH MUSIC (A2DP) FUNCTIONS
CALL HISTORY FUNCTIONS
NUMBER PAD FUNCTIONS
EASY CONNECTION
CONNECTION SCREEN
ANDROID USB CONNECTION (INITIAL CONNECTION)
Wi-Fi CONNECTION (INITIAL CONNECTION)
APK INSTALLER
SETTINGS
NETWORK & INTERNET
CAR INFOTAINMENT
COMMON
DISPLAY
VOLUME
AUDIO SETTINGS
VIDEO
NAVIGATION
BLUETOOTH
SWC
ABOUT DEVICE
APPS & NOTIFICATIONS
STORAGE
MEMORY
USERS & ACCOUNTS
SYSTEM
TROUBLESHOOTING
STATUTORY RIGHTS AND WARRANTY
3
4
4
5 - 8
9 - 12
12
13
14
15
16 - 20
16
16
17
18
19
20
21 - 23
21
22
23
24
25
25
26
26
27
28
29
30
31
32
33
34
35
35
36
36
37
38 - 43
44
45
.................................................................................................
..............................................................................
..................................................................
...................................................................................
....................................................
............................................................................
.........................................................................................
...................................................................................
. ............................................................................................
......................................................................................
......................................................................................
.........................................................................................
................................................
................................................
.........................................................
...................................
.......................................................
.........................................................
...............................................................................
..............................................................
................
...............................
....................................................................................
..............................................................................................
..............................................................
...................................................................
.......................................................................
.........................................................................
.........................................................................
.........................................................
............................................................................
..................................................................
..................................................................
...............................................................................
..............................................................
............................................................
..................................................................................
..................................................................................
...............................................................
....................................................................................
. ............................................................................
..............................................................................
..................................................

45
DEVICE ON/OFF
AUTOMATIC ON/OFF
The RADICAL system is switched on with vehicle ignition.
The RADICAL system is switched off when the ignition is turned off or when the ignition key is
removed.
NOTE
Pressing the power button on the front of the device does not switch it off. This only turns the screen
off; the power connection to the device is maintained.
HOME SCREEN
1. Home
2. USB connection status
3. Bluetooth connection status
4. WiFi connection status
5. Time
6. Task manager
7. Back
HOME SCREEN NAVIGATION
You can flick through the pages of the home screen by swiping to the left or right.

67
Tap on the relevant icon on the home screen to access the desired function.
The wallpaper can be changed by pressing and holding on a blank area of the home screen.
You can access the quick menu by swiping downwards.
Many settings can be quickly accessed through the quick menu.

89
The task manager icon opens the task manager. APPS AND WIDGETS
APPS
You can open the apps list page by tapping on the apps icon.
All installed apps are displayed on the apps list page.

10 11
By pressing and holding on an app icon, the app icon can be pinned to the home screen. To remove the app icon from the home screen, press and hold the icon and drag it to the trash.
You can open an app by tapping on it.

12 13
WIDGETS
Tap on the widget tab to open the widget list page.
All installed widgets are displayed on the widget list page.
TUNER APP
Functions
1. Scale Slide to change the frequency
2. RDS Tap to activate/deactivate RDS functions
3. AF Tap to activate alternative frequency
4. Frequency display Shows the current frequency
5. PTY Tap to activate search by program type
6. TA Tap to activate/deactivate traffic announcements
7. PREV Press to search lower FM station frequencies
8. NEXT Press to search higher FM stations frequencies
9. Band display Shows the current band
10. Preset Tap to choose the preset
11. Volume Slide to the left and right to adjust the media volume
12. Stereo Tap to activate/deactivate Stereo
13. FM Tap to switch between the different bands (FM1 > FM2 > FM3)
14. Key pad Tap to invoke key pad
15. Auto scan Tap to start automatic scanning for FM stations
16. EQ Tap to open the equalizer
ABBREVIATIONS
REG Activates search for regional stations with a strong signal
DX Stands for distance or distant exchange: means that stations in the wider vicinity will
be searched for. These stations usually have a weaker signal.
LOC Stands for local: means that stations in the closer proximity will be searched for.
These stations usually have a very strong signal.
TA Stands for traffic announcements.
AF Stands for alternative frequency: means that the same station will be searched for on
another frequency.
PTY Stands for program type: describes the division of stations according to categories.

14 15
MEDIA / MUSIC
Functions
1. Shuffle Tap once: shuffle on, tap again: shuffle off
2. Repeat Tap once: repeat a single track, repeat all tracks, repeat folder
3. EQ Tap to open the equalizer
4. Favourites Tap to add to favourites list
5. Browse Tap to switch to the fi le view
6. Previous track Tap to go back to the previous track.
7. Play/pause Tap to play or pause the current track
8. Next track Tap to go to the next track.
Information fields
9. Album cover
10. ID3 tag
11. Progress bar
12. Time played
13. Entire length
MEDIA / VIDEO
Functions
1. Zoom Tap to switch to full screen display
2. Repeat Tap once: repeat a single track, repeat all tracks, repeat folder
3. Rewind Tap to rewind
4. Play/pause Tap to play or pause the current video
5. Fast forward Tap to fast forward
6. Favourites Tap to add to favourites list
7. Browse Tap to switch to the folder overview
Information fields
8. Time played
9. Entire length

16 17
BLUETOOTH
PAIRING A BLUETOOTH DEVICE
1. Tap on the Bluetooth icon to start the Bluetooth function.
2. Activate Bluetooth on your mobile phone and check that your device is set to visible.
3. Tap the search icon to look for Bluetooth devices in your vicinity.
4. The name of your mobile device should now be shown in the list. Tap on the name of your
device to start the pairing process. If your device is not listed, try searching again for Bluetooth
devices in your vicinity.
5. You should now see a pairing message on your mobile phone. Enter the password for
Bluetooth pairing into your mobile phone.
6. When your mobile phone has been paired, tap on the phone book icon and then on the import
icon to import your contacts. (N.B. Android users will see a message on their mobile phone
requesting authorization. Confirm with ‘authorize’) (N.B. iOS users must manually activate
synchronization in the connection menu of their mobile phone)
DEVICE MANAGER FUNCTIONS
1. Device manager Tap to open the device manager
2. Number pad Tap to call up the number pad
3. Phone book Tap to open the phone book
4. Call history Tap to open call history
5. BT music Tap to open BT music
6. Search Tap to start the search for Bluetooth devices in the vicinity
7. Delete Tap to delete the paired device
8. Connect Tap to connect the device
9. Disconnect Tap to disconnect the device
Device Manager Information Fields
10. Paired devices
11. Connection symbol
12. Device name
PHONE BOOK FUNCTIONS
1. Search Tap to search the contact
2. Import Tap to manually update the phone book
3. Delete Tap to delete the phone book (only from the RADICAL device)
4. Sort by Tap to sort by first / last name
Phone book Information Fields
5. Phone book entries

18 19
BLUETOOTH MUSIC (A2DP) FUNCTIONS
1. Previous track Tap to go back to the previous track
2. Play/pause Tap to play or pause the current track
3. Next track Tap to go to the next track
Bluetooth Music Information Fields
4. Artist and track details
CALL HISTORY FUNCTIONS
1. Received calls Tap to see received calls
2. Outgoing calls Tap to see outgoing calls
3. Missed calls Tap to see missed calls
4. Delete Tap to delete the entries (only from the RADICAL device)
Call History Information Fields
5. Entries

20 21
NUMBER PAD FUNCTIONS
1. Numbers Tap to enter a number
2. Delete Tap to delete the last entry
3. Mute conversation Voice output muted / unmuted
4. Volume Tap to adjust the media volume
5. Switch output Tap during call to switch output between mobile phone and vehicle
6. Dial Tap to make a call
7. Hang up Tap to end a call
Call History Information Fields
8. Display
EASY CONNECTION
CONNECTION SCREEN
This is where you can choose the type of connection.

22 23
ANDROID USB CONNECTION (INITIAL CONNECTION)
1. Go to settings on your smartphone.
2. Activate the developer options on your Android smartphone.
3. Activate USB debugging.
4. Open the Easy Connection function.
5. Select Android USB.
6. Connect your smartphone to your RADICAL device via USB. (For first-time connections, your
smartphone must be connected to the internet.)
7. Download and install the Easy Connection App from the Google Play Store.
8. The Easy Connection App is automatically started after connection with Radical device is
established. The setup is completed.
Wi-Fi CONNECTION (INITIAL CONNECTION)
1. Go to the connection settings on your smartphone.
2. Activate mobile hotspot.
3. Open the Easy Connection function.
4. Select Android WiFi if you use an Android smartphone, or iPhone WiFi if you use an iOS
smartphone.
5. Connect your RADICAL device to your smartphone’s WiFi hotspot.
6. Activate the Airplay function on your iPhone. This will enable mirroring and the device can be
operated through your smartphone. For Android devices, connect your smartphone to the RADICAL
device via USB, maintain the USB connection until the Easy Connection APP has started on your
smartphone and can be seen on your RADICAL device. You can now disconnect the USB; the
smartphone is mirrored, and the device can be operated through the RADICAL device, or if preferred,
through your smartphone.

24 25
APK INSTALLER
1. Download the desired APK and copy into an external medium of your choise.
2. Connect the external medium to your RADICAL device.
3. Open the APK installer.
4. Select the install tab.
5. Tap on the APK that you wish to install.
6. Then press install.
7. After the APK has been installed, you can either open the APK directly, or complete the
process by pressing DONE.
SETTINGS
Network & Internet
WIFI FUNCTIONS
1. Available WiFi networks Tap on the appropriate network to establish a connection
2. Add network Tap to manually add a network
3. Settings Tap to open the WiFi settings
4. Additional options Tap to open the WiFi additional options
5. ON/OFF Tap to turn WiFi on/off
WiFi Information Fields
6. Menu display Indicates which menu you are in
7. Connection status

26 27
Car Infotainment
Common
1. The shutdown delay is 0 minute, 10 minutes, 20 minutes, 30 minutes, 60 minutes respectively.
Shutdown delay can be adjusted in accordance to preference.
2. Additional touch panel. User can choose to on or off the touch assist. The touch assist has 7
most commonly used options and is displayed on top of the screen at the interface where it
provides the user easy maneuver of the machine.
3. Reverse Volume Suppression. To adjust the volume while at the reverse position, select
Reverse Volume Suppression. There are four options available namely None, Weak, Medium
and Strong. Selecting None means there will not be any changes to the current defaulted
volume. Selecting Strong means lowering down the reverse volume at most.
4. Reset All Settings. Touch Reset All Settings, at the popup dialog, select confirm. When the
device restarts, the system will restore to factory settings. All your settings will be removed.
Display
Adjust the display brightness of the background for different timing of daytime and nighttime.

28 29
Volume
Volume options for respective systems can be adjusted in accordance to desire.
Audio Settings
Enter sound effect interface by touching "Sound Effect" to access different sound effect modes.

30 31
Video
Functions
1. Reversing Assistant Line. Tap to activate/deactivate Reversing Assistant Line.
2. Reversing Warning Line. Tap to activate/deactivate Reversing Warning Line.
3. Air Conditioner. Tap to activate/deactivate Air Conditioner.
4. Front Cam. Tap to activate/deactivate Front Cam.
Navigation
1. Autostart Navigation. User can set autostart of navigation upon booting.
2. File Path. User may insert pre-installed navigation application to pair with the navigation
button. The system will automatically display all installed applications and you may touch to
select the application of your choice.
3. Navi Mixed Volume. Slide to the left or right to adjust the Navi mixed volume.

32 33
Bluetooth
Functions
1. Auto Connect. By enabling this option, the machine will auto search and auto connect to the
last connected device.
2. Auto Answer. By enabling this option, the machine will auto answer all incoming calls using
Bluetooth.
SWC
You can configure the steering wheel remote control buttons with the steering wheel app.
1. Open the steering wheel app.
2. Now select the function that you wish to configure (the function will light up in blue).
3. Press the corresponding steering wheel remote control button.
4. Repeat step 2 - 3 to complete all the control button settings.

34 35
About Device
Here you can see the software status of the hardware modules of the device.
Apps & notifications
You can select which apps may send notifications on the app notifications page.
You can manage your installed apps on this page. Here you can also uninstall apps that have been
installed.
Storage
Here you can see information about the internal memory and any external memory device connected.

36 37
Memory
Here you can see information about the internal RAM memory.
Users & accounts
User accounts can be managed here.
System
Change or add language
Press on language to open the language list. You can add a new language to the list by selecting ‘add
language’. Select the language that you wish to add to the list. The position of the languages shows
the order in which the languages are placed: The primary language which is also the display language
is placed first. To use a different language as the display language, press on the desired language and
drag it into the first place.

38 39
INSTALLATION NOTES
CAUTION:
-The installation of the RADICAL system should be carried out by an authorized installer.
Specific knowledge and tools are required to do the installation. Incorrect installation can
cause damage to the vehicle and the RADICAL system.
-Correct functioning can only be guaranteed when you use the RADICAL original accessories
included in the kit or those optionally available. The RADICAL system and the original
accessories must under no circumstances be modified or altered in any way. Inappropriate
actions can cause damage to the vehicle and the RADICAL system.
NOTE:
-The RADICAL system is not compatible with vehicles, which are equipped with a hybrid or
electro drive ex factory.
-The RADICAL R-D111 is equipped with an integrated DAB+ receiver. To make use of this you
will need a suitable DAB antenna (included in kit) that must be connected to the
RADICALsystem.
REMOVAL WORK AND PREPARATION
NOTE:
-Remove the ignition key and keep it outside the car until the installation is finished.
-Please wait for ca. 10 minutes until the CAN bus system is completely shut down, before you
start with the deinstallation of the original device.
-Start with the deinstallation of the original device.
NOTE:
-Make sure that all connectors at the rear of the ZENEC system have sufficient room and are
not bent.
-Connectors without a retaining mechanism must be additionally secured with insulating tape.
OVERVIEW INCLUDED ACCESSORIES
No.
Article
Qty
1
GPS antenna with metal mounting plate and double sided adhesive pad
1
2
6 Pin connection cable (Aux-Video In, Aux L IN, Aux R IN, F-Camera, R-CAM
Power +12V, F-CAM Power +12V)
1
3
10 Pin connection cable (Subwoof 2x, FL-Out, FR-Out, RL-Out, RR-Out, AV1-
Out, CAM +6.8V)
1
4
Wi-Fi antenna
1
5
Removal tool
2
6
USB extension cable
3
7
ISO-DIN main harness
1
8
Microphone with mounting clip
1
9
DAB antenna
1
1
2
3
4
5
6
7
8
9