Product Diagrams and Contents of Product Package
Precautions Before Application
After you open the outer package, make sure that the following items are contained
in the package:
A
B
C
D
E
F
G
Quick Guide x1
Hardware Installation
We suggest you using 2 brand new 2.5-inch SATA hard drives with the same brand
and model number for the best performance. When any one of the hard drives is
failed, please ensure that the capacity of the new hard drive is the same or bigger
than the original one.
Please ensure that the hard drives are free of bad tracks before using, otherwise, it
may cause system crash in turn resulting in data loss.
We strongly suggest you that the RAID mode should be decided before starting
use iR2774-S3. If you need to reset the RAID mode after using iR2774-S3, please
remember to backup your data on the other hard drives or the data may lose.
A reboot is required after adding or changing RAID mode to ensure that the update
is completed to the new RAID mode.
We strongly recommend you to keep an extra copy at your important personal data
other than stored in your iR2774-S3 product. RAIDON will not be responsible of
your data loss problem.
1.
2.
3.
4
5.
Raidon
LED Instruction
Contents of Product Package
RAIDON is one brand under RAIDON TECHNOLOGY, INC.
Thank you for choosing RAIDON’s product.
The information provided in this manual was checked before publication, but the actual product
specications may have changed before shipping; Latest product specications and updates can be
found at www.RAIDON.com.tw or through your sales representative. No separate notications will be
provided by our company.
If you have any questions about RAIDON products or would like to receive the latest product information,
All product-related content in this manual are copyrighted by RAIDON TECHNOLOGY, INC.
v1.0 (Oct. 2021)
Screw positions to
mount like a
3.5" hard drive
Screw positions to mount
like a floppy drive
C
B
A
B
D
E
FG
Lock Unlock
RAID Mode
Buzzer
1. If you want to change the RAID mode, change to JBOD mode first then change to the
RAID mode you want to use.
2.How to change the RAID mode:
Turn the power off and then press the RESET button when power on. After about 5
seconds, when the Buzzer beeps and the HDD LED flash, you can release the button
and the RAID mode changed complete.
