Rail King 0-4-0 Dockside Freight Set User manual

0-4-0 Dockside Freight Set
0-4-0 Dockside Freight Set
Operation Manual
www.railking.com
Thank you for purchasing this RailKing product.
PLEASE READ BEFORE USE AND SAVE

Table of Contents
SetUpChecklist...................................3
GettingStarted....................................4
®...............................................
Assembling RealTrax 4
Plugging in the Transformer . . . . . . . . . . . . . . . . . . . 4
LubricatingtheEngine.......................5
PrimingtheSmokeUnite.....................5
Coupling the Engine and Cars . . . . . . . . . . . . . . . . . 5
BasicOperation...................................6
OperationButtons...........................6
DirectionLock .............................6
Maintenance......................................7
Lubrication and Greasing Instructions . . . . . . . . . . . 7
Cleaning the Wheels, Tires and Track. . . . . . . . . . . . 8
ProtoSmoke® Unit Operation. . . . . . . . . . . . . . . . . . 8
CDROM.....................10
Troubleshooting..................................11
Compatibility....................................12
Transformer Compatibility Chart. . . . . . . . . . . . . . . . . . . 12
ExplodedViewParts..............................13
Service and Warranty Information . . . . . . . . . . . . . . . . . . 16
Authorized Service Centers . . . . . . . . . . . . . . . . . . . . . . . . 17
Locomotive Light Bulb Replacement . . . . . . . . . . . . 9
Caboose Light Bulb Replacement. . . . . . . . . . . . . . . 9
RailWare Interactive
RailKing 0-4-0 Dockside Freight Set
2
CAUTION: ELECTRICALLY OPERATED PRODUCT:
Not recommended for children under 10 years of age. M.T.H. recommends adult supervision with children ages 10 - 16.
As with all electric products, precautions should be observed during handling and use to reduce the risk of electric
shock.
WARNING:When using electrical products, basic safety precautions should be observed, including the following:
Read this manual thoroughly before using this device.
lM.T.H. recommends that all users and persons supervising use examine the hobby transformer and other electronic equipment
periodically for conditions that may result in the risk of fire, electric shock, or injury to persons, such as damage to the primary
cord, plug blades, housing, output jacks or other parts. In the event such conditions exist, the train set should not be used until
properly repaired.
lDo not operate your layout unattended. Obstructed accessories or stalled trains may overheat, resulting in damage to your
layout.
lThis train set is intended for indoor use. Do not use if water is present. Serious injury or fatality may result.
lDo not operate the hobby transformer with damaged cord, plug, switches, buttons or case.
lThe transformer was designed to operate on regular US household current (120 volt, 50-60 Hertz). Do not connect to any other
source of power.
lTo avoid the risk of electrical shock, do not disassemble the transformer unit. There are no user-serviceable parts inside. If the
unit is damaged contact M.T.H. Service for instructions.
lThe transformer is equipped with an internal circuit protector. If the circuit protector trips, unplug the power cord from the
electrical wall outlet, check your layout for any short circuits. The circuit breaker will reset automatically when the short is
removed from the circuit.
lUnplug the transformer from the electrical wall outlet when not in use.
lDo not use this transformer for other than its intended purpose.
Transformer Ratings:
Input: 120 VAC
60 Hz Only
Output: 18VAC, 3A54VA

Set Up Checklist
®
rAssemble RealTrax
rConnect the transformer
rLubricate the engine
rPrime the smoke unit
rPlace the engine and cars on the track and couple them together
rApply power to run as described in the Basic Operation section of
these instructions.
Set Includes
Box Car
Gondola Car 8-Pieces
O-31 Curve RealTrax
Z-500 Transformer
Steam Engine with Whistle
3
Lock-On
CD-Rom
Tools Needed
Cotton Swab or Rag
Scissors
Pliers
RailKing Maintenance Kit or
Light Household Oil and Bearing Grease
Wire Harness Track Clips
You can obtain replacement parts and replacement instructions from the
M.T.H. Parts Department
e-mail: [email protected]
phone: [phone]
mail: 7020 Columbia Gateway Drive, Columbia MD 21046-1532
Philips Screwdriver
Lighted Work Caboose
RailKing 0-4-0 Dockside Freight Set

Getting Started
®
Assembling RealTrax
The quick connectors and built-in roadbed allow you to set up RealTrax anywhere,
including carpeted surfaces.
Connecting the Transformer
®
The Z-500 transformer included with this set provides an easy-to-use, safe power source
for AC-powered trains and accessories.
To complete the connection between the track and the transformer, simply plug in the
color-coded wire harness that was included in your set and plug the transformer into your
wall outlet.
Gently push together RealTrax
-750
DIRECTION
BELL
HORN
WHISTLE
POWER
AILING
RK
ByMTHElectricT
rains
®
TRANSFORMERCONTROLLER
OFF
FULL
POWER
Also functions as a binding post.
Red Harness
Wire/Plug
Red Harness
Wire/Plug
Black Harness
Wire/Plug Black Harness
Wire/Plug
Insert lock-on into
knock-out tab
(Lock-on is the interface between
the track and transformer)
Make sure the metal
contacts line up. Align Quick
Connect Plugs
4
Knock-out must be removed
before remote lock-on can
be installed
Remove knock-out from
outer edge of track by
holding and twisting up
with a pair of pliers
REMOVE TAB
FROM OUTER EDGE
Line up the track clip Pop track clip in place.
Connecting
Track Clips
If you prefer not to screw
your track to the table for
a permanent layout, use
the enclosed track clips
on adjoining curved
RealTrax sections to
secure them in place.
RailKing 0-4-0 Dockside Freight Set
STEP
11
STEP
11
STEP
22
STEP
22
STEP
33
STEP
44
STEP
55
STEP
66

Lubricating the Engine
Lubricate all exposed moving parts before operating using a multi-purpose,
plastic-compatible oil (available with M.T.H.'s Maintenance Kit, sold
separately) or a light household oil. Follow the lubrication points.
Priming the Smoke Unit
You should prime the smoke unit with smoke fluid before
operating. Add 15-20 drops of smoke fluid from the
included pipette through the smokestack, then gently blow
into the stack to eliminate any air bubbles in the fluid.
If you choose not to prime the unit with fluid, turn the
smoke un to the OFF
position. Running the engine without a primed smoke
unit may cause damage. See the "ProtoSmoke Unit
Operation" section of this book for more information on smoke unit maintenance.
Coupling the Engine and Cars
it switch located under the engine
Place the engine and cars
on the track.
Open couplers by pressing
down on plunger.
Push cars together
to couple.
DO NOT
OVER OIL
DO NOT
OVER OIL
DO NOT
OVER OIL
Lubricate Valve Gear Lubricate Pick-Up Rollers
(Do Not Oil the Flat Part of
Pick-Up Rollers)
Lubricate Side Rods
5
Smoke Unit
ON/OFF Switch
Add 15-20 Drops
Smoke Fluid
Position
armiture
for proper
operation
Incorrect
Position
Running the engine without a primed
smoke unit may cause damage
RailKing 0-4-0 Dockside Freight Set
STEP
11
STEP
22
STEP
33

Basic Operation
The Throttle knob controls how fast your train will travel.
!Turn the throttle knob up ½-way, until the engine and caboose lights shine bright.
!Put the engine into motion by pressing the Direction button on your transformer
once. (hold it for approximately 1 second)
If the engine does not begin to move as soon as you firmly press the Direction button,
you may not have sent enough voltage to the track to make the train move. Turn the
throttle up a bit higher until the train begins to move.
Operation Buttons
Throttle To increase or decrease track
voltage, and therefore train speed, turn the
throttle control knob. Turning it clockwise
will increase voltage and speed, while
turning it counterclockwise will decrease
voltage and speed. The engine will maintain
the speed you set after you release the
throttle until you turn it again to change the
voltage and speed.
Horn/Whistle - To sound the whistle,
firmly press the Horn/Whistle button. The
horn will sound for as long as you continue
to depress the button. It will stop when you release the button.
Direction Your train is programmed to start in neutral.
The train will always cycle neutral-forward-neutral-
reverse with each press and release of the direction
button. The engine is programmed to restart in neutral
each time the track voltage is turned off for 25 seconds
or more.
Direction Lock
You can lock your engine into a direction (forward, neutral, or reverse) so that it will not
change directions. To do this, put the engine into the direction you want, then remove the
engine from the track and slide the ON/OFF switch located on the bottom of the engine
to the OFF position. The engine will not change direction (including going into neutral)
until you flip the switch back to ON to return the engine to its normal condition, even if
the engine is kept without power for extended periods of time.
6
Cycle Phases
Neutral
Neutral
ForwardReverse
RailKing 0-4-0 Dockside Freight Set

Maintenance
Lubrication Instructions
The engine should be oiled and greased in order to run properly.
Regularly lubricate all side rods and linkage components and pickup rollers
to prevent squeaking. Use light household oil, such as that found in
M.T.H.'s maintenance kit. Do not over oil. Use only a drop or two on each pivot point.
Greasing Instructions
Add grease to the internal drive gears (accessed through the gear box) annually or after
every 50 hours of operation. In order to access and put grease into the gear box:
DO NOT
OVER OIL
DO NOT
OVER OIL
DO NOT
OVER OIL
Remove the boiler by unscrewing the
four chassis screws and lift the boiler
away from the chassis.
Remove the smoke
unit assembly and
light bracket.
Open the gear box. Unscrew the three
screws on the plate located in front of
the motor and lift the motor.
7
Lubricate Valve Gear Lubricate Pick-Up Rollers
(Do Not Oil the Flat Part of
the Pick-Up Rollers)
Lubricate Side Rods
Apply lithium based grease into the gear
box using a grease tube dispenser such
as that provided in the M.T.H.
Maintenance Kit.
Reassemble in reverse order.
RailKing 0-4-0 Dockside Freight Set
STEP
11
STEP
22
STEP
33
STEP
44

Cleaning the Wheels, Tires and Track
Periodically check the locomotive wheels and pickups for dirt and buildup, which can
cause poor electrical contact and traction and prematurely wear out the neoprene traction
tires. Wheels and tires can be cleaned using denatured (not rubbing) alcohol applied with
a cotton swab.
To clean the track, use RailKing Track Cleaning Fluid and
a clean rag or denatured (not rubbing) alcohol. Unplug
the transformer and wipe the rails of the track, turning the
rag frequently to ensure that you are using clean cloth on
the rails. Because the manufacturing process leaves a
coating on RealTrax center rail, you should clean the rails
after the first 30 minutes of use (you may notice an
electrical smell during initial use as the coating wears off;
this is normal). Thereafter, keep an eye on the track and
clean it when it gets dirty to ensure good electrical contact
and to lengthen the life of the tires.
®
ProtoSmoke Unit Operation
This steam locomotive contains a smoke unit that outputs smoke through the smokestack
on the boiler of the engine. The smoke unit is essentially a small heating element and
wick that soaks up and then heats a mineral oil-based fluid that emits a harmless smoke.
The smoke is then forced out of the stack by a small electric fan.
With a few easy maintenance steps, you should enjoy trouble-free smoke unit operation
for years.
!When preparing to run this engine, add 15-20 drops of
smoke fluid through the smokestack. We recommend
M.T.H. ProtoSmoke, Seuthe, LGB, or LVTS fluids (a
small pipette of ProtoSmoke fluid is included). Do
not overfill the unit or the fluid may leak out and coat
the interior engine components.
!If you choose not to add the fluid (or have already
added the fluid but choose to
dy. Failure either to add fluid to
the unit or to turn it off may damage the
smoke unit heating element and/or wicking
material.
!When the smoke output while running the engine begins to diminish, add another
10-15 drops of smoke fluid or turn the smoke unit off.
!When storing the unit for long periods of time, you may want to add about 15 drops
of fluid to prevent the wick from drying out.
run smoke-free),
turn off the smoke unit switch located under the
engine bo
Add 15-20 Drops
Smoke Fluid
8
Smoke Unit
ON/OFF Switch
Add 15-20 Drops
Smoke Fluid
RailKing 0-4-0 Dockside Freight Set
Running the engine without a primed
smoke unit may cause damage

!After removing the engine from storage, add another 25 drops of fluid, letting the
wick soak up the fluid for 15 minutes prior to operation.
If you experience poor or no smoke output when the smoke unit is on and has fluid,
check the wick to see if it has become hard, blackened, and unabsorbent around the
heating element. Remove the boiler as shown on page 7. Remove the smoke unit
inspection cover from the locomotive's
body (see right). After removing the
chassis and inspection cover screws, lift
the inspection plate away and inspect the
wick. If it is darkly discolored and hard, it
should be replaced. When priming new
wick add 40 drops.
Locomotive Light Bulb Replacement
To replace the light bulb in the locomotive, follow the boiler
removal instructions on page 7. (Part #CA-0000051)
Once the locomotive boiler has been removed from its chassis,
locate the bulb bracket as seen in the illustration on the right and
rotate the headlight bulb counter-clockwise to remove.
Caboose Light Bulb Replacement
To replace the interior light bulbs follow these instructions and see the diagrams below:
Remove the four (4) screws located
under the caboose's trucks.
Bayonet Bulb
Replace a Bayonet Bulb by turning and pulling up,
pulling the bulb from its socket.
Smoke Unit Cover
Wick in
Poor
Condition
Wick in
Good
Condition
Replace Headlight Bulb
9
Lower the chassis
from the shell, taking
care not to pull the
wires out.
(Part #CI-0000015)
1
2
RailKing 0-4-0 Dockside Freight Set
STEP
11
STEP
22
STEP
33

RailWare Interactive CD ROM
M.T.H. provides a free RailWare CD ROM in each Ready-To-Run set. It is full of helpful
information on M.T.H. product history, track planning software, a dealer finder, and
information and video clips on Loco-Sound and Proto-Sound 2.0. Follow the directions
below to use the CD ROM.
Minimum System Requirements: Pentium 100, 16MB RAM, Windows 95 or later, CD
ROM drive, Sound Card, display properties set to greater than 256 colors. The CD will not
®
work on a Mac OS unless you run VirtualPC .
Running RR-Track Software
You may run the RR-Track software directly off of the CD ROM or you may install the
software to your hard drive.
1. On the Desktop, click on the icon that says My Computer.
2. Find your CD ROM drive.
3. With the M.T.H. CD ROM in the drive, double click on the icon for the CD ROM
drive.
4. Find the folder on the CD ROM entitled INSTALLATION.
5. Choose the folder inside entitled RRTRAXSETUP.
6. Run the file in that folder called SETUP.EXE and follow the directions it provides.
The program may ask you for a registration code. If it does type in "M.T.H." and it will run
Additional track libraries can be obtained directly from RR-Track. See their website for
more information www.rrtrack.com.
Installing Adobe Acrobat Software
To read some of the electronic documents included on the CD ROM, you will need to
®
install the Adobe Acrobat Reader if it is not already on your computer. To install the
software:
1. On the Desktop, click on the icon that says My Computer.
2. Find your CD ROM drive.
3. With the MTH CD ROM in the drive, double click on the icon for the CD ROM drive.
4. Find the folder on the CD ROM entitled INSTALLATION.
5. Choose the folder inside entitled ACROBAT READER.
*If you are running Windows 95, 98 or NT choose the folder 32 BIT. Run the file
AR32E301.EXE and follow the directions it provides.
If you have problems you cannot resolve by using these directions, contact custserv@mth-
railking.com or call 410-381-2580 for further help.
10 RailKing 0-4-0 Dockside Freight Set

Troubleshooting Problems
Although this engine has been designed and engineered for ease of use, you may have
some questions during initial operation. The following table should answer most
questions. If your problem cannot be resolved with this table, contact M.T.H. for
assistance (e-mail: [email protected]; telephone: [phone];
fax: [phone]; mail: 7020 Columbia Gateway Drive, Columbia MD 21046-1532).
Starting Up
Whistle
Bell
Lock-out
When I first turn the power on,
the engine will not begin to run. I
have to turn the throttle off and
then on again to get the engine to
operate.
The engine will not start after I
press the Direction button.
I can’t get the Whistle to blow
when I press the whistle button.
I can’t get the bell to ring when I
press the bell button.
I can't get the engine to run after I
power up the transformer.
Remedy
Remedy
Remedy
Remedy
This is normal behavior. To prevent accidental
high-speed start-ups, this engine is programmed
to start up in neutral anytime track power has
been turned off for several seconds. See the
“Basic Operation” section for more details.
You may not be sending enough power to the
track to power the engine. Press the throttle up
a bit higher to increase track power.
You may be pressing the button too quickly.
Try pressing the whistle button more slowly,
taking approximately one full second to fully
depress the button.
This engine is not equipped with a complete
sound set, so there is no bell sound. The bell
button will have no effect on your engine.
The engine may be locked into the neutral
position. Follow the procedure in the “Lock
into a Direction” section on page 6 to unlock
the engine’s direction.
11
RailKing 0-4-0 Dockside Freight Set

Compatibility
While this Ready-To-Run set is equipped with everything you need to operate it, the
design allows flexibility. The train will operate on any traditional O-31 or larger O
®
Gauge track system, including the RealTrax included with this set or traditional tubular
track. It is also compatible with most standard AC transformers, including the hobby
transformer packaged with your set.
Transformer Compatibility and Wiring Chart
12 RailKing 0-4-0 Dockside Freight Set

NameandNumber Part#
1.) Shell ( black )( NYC )( # 9998 ) FB-1200240
Shell ( yellow, red ) FB-1200241
( I Love Toy Trains )( # 1 )
2.) Lens ( clear ) FA-1230022
( headlight/reverse light )
3.) Handrail ( nickel ) FB-1200103
4.) Stanchion ( black ) FB-1200242
( plastic )( 3.0mm long )( NYC )( # 9998 )
Stanchion ( yellow ) FB-1200243
( plastic )( 3.0mm long )( I Love Toy Trains )( # 1 )
5.) Bell ( nickel ) FB-1200101
6.) Name plate ( black )( blank ) FB-1200244
( NYC )( # 9998 )
Name plate ( red )( # 1 ) FB-1200245
( I Love Toy Trains )( # 1 )
7.) Screw IA-0000050
( 6/32x8.0mm )( roundhead )
8.) Bolt ( nickel ) IA-0000265
( M3x10.0mm )( w/ 3.5x4.0mm oversized shank )
9.) Bolt ( nickel ) IA-0000266
( M3x10.0mm )( w/ 2.0x4.0mm oversized shank )
10.) Drive rod ( nickel ) EC-1250018
( 56.3mm long )
11.) Side rod ( nickel ) EC-1250019
( 55.0mm long )
12.) Crosshead ( nickel ) EC-1250016
13.) Drive rod guide ( nickel )( right ) EA-1210007
14.) Drive rod guide ( nickel )( left ) EA-1220007
15.) Screw IA-0000021
( 4/40x4.0mm )( roundhead )
16.) Bulb ( clear )( headlight ) CA-0000051
( 18v )( long bulb )( small screw base )
17.) Bracket ( black )( metal ) IH-0000088
( for smoke unit/headlight )
18.) Screw IA-0000003
( 4/40x6.0mm )( roundhead )
19.) Smoke unit AA-1200013
20.) Motor mount ( black ) BI-0000034
21.) Screw ( yellow Zink ) IA-0000089
( M2.5x6.0mm )( roundhead w/ lock washer )
22.) Screw IA-0000058
( M2x4.0mm )( roundhead )
23.) Switch ( small ) BB-0000009
Dockside Engine Parts
13
RailKing 0-4-0 Dockside Freight Set

24.) Drive block ( black ) DF-1200035
( 2 axle )( has screw holes added for part # 43 )
( NYC )( # 9998 )
Drive block ( 2 axle ) DF-1200036
( light blue drive block w/ red wheels )
( has screw holes added for part # 43 )
( I Love Toy Trains )( # 1 )
25.) Insulator ( black ) BD-0000026
( top )( square )( pick-up )
26.) Screw IA-0000015
( M3x6.0mm )( roundhead )
27.) Motor ( RS-365SH ) BE-0000045
( 8.0x21.0mm worm gear w/ 13.0mm long threads )
( 9.0x30.0mm flywheel )
28.) Board ( reverse unit ) AC-0000007
29.) Nut ( nickel )( 2.2x6.4x2.4mm ) IC-0000010
30.) Screw IA-0000264
( 4/40x12.0mm )( roundhead )
31.) Bracket ( Aluminum ) IH-0000089
( reverse unit board mounting bracket )
32.) Insulator ( clear )( plastic ) BD-0000072
( box shaped )( 17.6x39.8x16.8mm )( 0.5mm thick )
33.) T-bar ( black )( plastic ) IG-0000001
34.) Coupler DD-0000011
35.) Armature DD-0000012
36.) Spring IE-0000022
( 6.5x14.0mm )( w/ 0.5mm thick wire )
37.) Washer ( plastic )( black ) ID-0000060
( cup shaped for spring to fit in )( 4.6x8.6x2.0mm )
( inside 7.0x1.1mm )
38.) E-clip ( 3.0x8.0x0.5mm ) IF-0000002
39.) Nut ( 2.5x5.0x7.0mm ) IC-0000008
40.) Insulator ( black ) BD-0000024
( pick-up )( bottom )( flat )( square )
41.) Pick-up BD-0000048
( 8.0x11.0mm roller )( 28.0mm long )
42.) Pick-up BD-0000050
( 8.0x11.0mm roller )( 24.0mm long )
43.) Bracket ( black )( metal ) IH-0000209
(14.0x42.7x0.5mm)(2.0x21.0mm notch on one side)
14 RailKing 0-4-0 Dockside Freight Set

Dockside 0-4-0 Engine Parts
9
8
38
42
41
37
36
15
14
20
27
31
3
7
19
24
16
10
8
43
17
34
35
33
12
10
11
35
38
36
37
34
33
32
28
25
18
26
15
6
2
1
2
5
3
26
40
39
22
23
18
21
7
15
30
29
4
7
4
11
9
12
13
15
15
RailKing 0-4-0 Dockside Freight Set

www.railking.com
© 2001 M.T.H. Electric Trains, 7020 Columbia Gateway Drive, Columbia Maryland 21046-1532.
Service & Warranty Information
How to Get Service Under the Terms of the Limited One-Year
Warranty
For warranty repair, follow the instructions below to obtain warranty service.
First, e-mail, write, call or fax an Authorized M.T.H. Service Center in your area or M.T.H. Electric Trains to
obtain Repair Authorization. You can find the list of Authorized Service Centers on the M.T.H. website,
www.mth-railking.com. Authorized Service Centers are required only to make warranty repairs on items sold from
that store; all other repairs may or may not be done at the store's own discretion. Otherwise, contact M.T.H. (fill
out the Service Contact form in the Service Section of www.mth-railking.com; send US mail to the address listed
below; tel: [phone]; fax: [phone]), stating when the item was purchased and describing the problem.
If you contact M.T.H., you will be given a return authorization number to assure that your merchandise will be
properly handled upon its receipt.
CAUTION: Make sure the product is packed in its original factory packaging including its foam and plastic
wrapping material so as to prevent damage to the merchandise. The shipment must be prepaid and we recommend
that it be insured. A cover letter including your name, address, daytime phone number, e-mail address (if
available), Return Authorization number, a copy of your sales receipt and a full description of the problem must
be included to facilitate the repairs. Please include the description regardless of whether you discussed the
problem with a service technician when contacting the Service Center or M.T.H. for your ReturnAuthorization.
Please make sure you have followed the instructions carefully before returning any merchandise for service.
Limited One-Year Warranty
All M.T.H. products purchased from anAuthorized M.T.H. Train Merchant are covered by this warranty.
See our website at or call 1-888-640-3700 to identify an Authorized M.T.H.Train
Merchant near you.
M.T.H. products are warrantied for one year from the date of purchase against defects in material or workmanship,
excluding wear items such as light bulbs, pick-up rollers, batteries, smoke unit wicks, and traction tires. We will
repair or replace (at our option) the defective part without charge for the parts or labor, if the item is returned to an
Authorized M.T.H. Service Center or M.T.H. Electric Trains within one year of the original date of purchase. This
warranty does not cover damages caused by improper care, handling, or use. Transportation costs incurred by the
customer are not covered under this warranty.
Items sent for repair must be accompanied by a return authorization number, a description of the problem, and a
copy of the original sales receipt from an Authorized M.T.H. Train Merchant, which gives the date of
purchase. If you are sending the item to M.T.H., fill out the Service Contact form in the Service Section of
www.mth-railking.com; send US mail to the address listed below; call 410-381-2580, or fax [phone] to
obtain a return authorization number. If you are sending this product to an Authorized Service Center, contact that
Center for their return authorization.
This warranty gives you specific legal rights, and you may have other rights that vary from state to state.
www.mth-railking.com

ALABAMA FLORIDA LOUISIANA
SOUTHERLAND STATION DEPOT HOBBY SHOP AMERICA'S TRAIN YARD
HUNTSVILLE LAKE WORTH BATON ROUGE
256-533-4720 561-585-1982 225-926-5592
[email protected] [email protected]
www.depothobbies.com MAINE
ARIZONA WHEELS, WINGS & THINGS
ARIZONA TRAIN DEPOT COLONIAL PHOTO & HOBBY LUDLOW
MESA ORLANDO 207-532-6277
480-833-9486 407-841-1485 [email protected]
[email protected] [email protected]
www.arizonatraindepot.com/ MARYLAND
WARRICK CUSTOM HOBBIES ENGINE HOUSE HOBBIES
CALIFORNIA PLANTATION GAITHERSBURG
DOLLHOUSES, TRAINS & MORE 954-370-0708 301-590-0816
NOVATO [email protected] [email protected]
415-883-0388 www.warrickcustomhobbies.com
[email protected] J & B TRAINS
FRANK'S TRAINS & HOBBIES INC. HAGERSTOWN
TIN PLATE JUNCTION OLDSMAR 240-420-4930
OAKLAND 813-855-1041
510-444-4780 [email protected] HOBBYTOWN U S A
[email protected] www.allhobbies.com FREDERICK
301-694-7395
COLORADO READY TO ROLL
MIZELL TRAINS Inc MIAMI PURKEY'S TOY TRAINS
WESTMINSTER 305-688-8868 SYKESVILLE
303-429-4811 [email protected] 410-549-6061
[email protected] www.readytorolltrains.com [email protected]
www.mizelltrains.com
ILLINOIS THE TRAIN ROOM
CONNECTICUT BIKE & CHOO CHOO CONNECTION HAGERSTOWN
SHELTON RAILROAD SYSTEMS SCHAUMBURG 301-745-6681
SHELTON 847-882-7728
203-924-8761 [email protected] MASSACHUSETTS
[email protected] NORTHEAST TRAINS
NEW ENGLAND HOBBY SUPPLY INDIANA PEABODY
MANCHESTER Y. O. R. K. TRAINS 978-532-1615
860-646-0610 MUNSTER www.netrains.com
[email protected] 219-838-9999
[email protected] MICHIGAN
DELAWARE BRASSEUR ELECTRIC TRAINS INC.
K R R B MODEL TRAINS INC. SAMUELSON'S TRAIN SHOP SAGINAW
NEWARK VALPARAISO 517-793-4753
302-292-2779 219-462-2708 [email protected]
[email protected] www.traindoctor.com
www.krrb.com
PARTICIPATING RETAILER LIST
AUTHORIZED SERVICE CENTER
www.mth-railking.com
AUTHORIZED SERVICE CENTERAUTHORIZED SERVICE CENTER
7020 Columbia Gateway Dr. - Columbia, MD 21046
Information: 410-381-2580 Fax: [phone]

MISSOURI COUNTRY AND STUFF RICK'S TOY TRAINS
SWITCH STAND ANDOVER TOLEDO
SAINT LOUIS 973-786-7086 419-478-0171
314-781-4458 [email protected]
[email protected] T & K HOBBY SHOP
RIDGEFIELD HOBBY BRIDGEPORT
MARK TWAIN HOBBY CENTER RIDGEFIELD 740-633-6607
ST. CHARLES 201-943-2636 [email protected]
636-946-2816 www.tkhobbies.com
[email protected] COLUMBUS TRAIN STATION
www.hobby1.com COLUMBUS TRAINS-N- THINGS
609-518-1800 CANTON
NEW HAMPSHIRE 330-499-1666
TREASURED TOYS NEW YORK [email protected]
SALEM AURORA RAILS & HOBBIES
603-898-7224 EAST AURORA PARMA HOBBY
[email protected] 716-652-5718 CLEVELAND
www.treasured-toys.com [email protected] 216-741-6440
[email protected]
RAILROAD SPECIALTIES AMERICANA STORE
HUDSON TIVOLI GLEN'S TRAIN SHOP
603-882-5566 845-757-4246 AKRON
[email protected] [email protected] 330-253-6527
www.electric-trains.com
NASSAU HOBBY CENTER, INC. E & S TRAINS
NEW JERSEY FREEPORT AKRON
TRAINS & THINGS 516-378-9594 330-745-0785
TRENTON [email protected]
609-883-8790 GRAND PACIFIC JUNCTION
[email protected] KROSS HARDWARE OLMSTEAD FALLS
WEST BABYLON 440-235-4777
GRAND CENTRAL STATION 631-669-3069 [email protected]
KEARNY [email protected] HUDSON TOY, TRAIN & HOBBY
201-955-6200 HUDSON
[email protected] CITY DEPOT, INC. 330-653-2997
NEW HAMPTON [email protected]
HOBBYMASTERS, INC 845-374-3010
RED BANK [email protected] DAVIS ELECTRONICS
732-842-6020 www.citydepot.com MILFORD
[email protected] 513-831-6425
NORTH CAROLINA [email protected]
HOLLY BEACH TRAIN DEPOT DRY BRIDGE STATION www.davistrains.com
WILDWOOD MOUNT AIRY
609-522-2379 336-786-9811 SANDY'S HOBBY'S & COLLECTIBLES
[email protected] [email protected] ELYRIA
www.drybridgestation.com 440-365-9999
COAST TRAINS AND COLLECTIBLES [email protected]
WALL THE FREIGHT YARD
732-556-9005 SMITHFIELD ERIE RAILWAY DEPOT
[email protected] 919-934-6229 TROY
www.coasttrains.com [email protected] 937-440-9972
[email protected]
J & B TRAINS, INC. TRAINS LTD.
MAPLE SHADE CHARLOTTE CLEARVIEW TRAIN & HOBBY
856-414-0092 704-566-9070 LORAIN
[email protected] [email protected] 440-277-4488
www.trainsltd.com [email protected]
HOBBY SHOP www.clearviewtrainandhobby.com
MATAWAN THE ROUNDHOUSE & BACKSHOP
732-583-0505 CARY PENNSYLVANIA
hobbyshopnj.com 919-465-0810 FAIRCHANCE PHARMACY
FAIRCHANCE
ATLANTIC RAILS OHIO 724-564-7817
HAMMONTON DIXIE UNION STATION [email protected]
609-567-8490 MASON www.hhs.net/fairchance
[email protected] 513-459-0460
www.atlanticrails.com [email protected]
www.dixieunionstation.com

THE STATION TENNESSEE WISCONSIN
NEW CUMBERLAND MODEL RAILROAD & HOBBY SHOP SOMMERFELD'S TRAINS
717-774-7096 MEMPHIS BUTLER
[email protected] 901-384-6500 262-783-7797
BUSSINGER TRAINS [email protected] [email protected]
AMBLER www.modelrailroadandhobby.com www.sommerfelds.com
215-628-2366
[email protected] TEXAS G B T V & TRAINS
www.icdc.com/~btrains HOBBY TIME GREEN BAY
AMARILLO 920-496-9697
CHARLEROI SWEEPER CENTER 806.352.9660 [email protected]
CHARLEROI [email protected]
724-483-3397 GRAMPA'S TRAIN SHOP
VIRGINIA RICE LAKE
AMERICAN HOBBY CENTER TRAIN DEPOT 715-234-2996
ALIQUIPPA MANASSAS [email protected]
724-378-3930 703-335-2216
[email protected] THE TRAIN STORE
NORGE STATION WAUKESHA
CRANBERRY HOBBY DEPOT WILLIAMSBURG 262-650-6675
CRANBERRY TWP 757-564-7623
724-776-3640 [email protected] HOBBY OUTLET
[email protected] FOND DU LAC
NUTBUSH EXPRESS 920-924-3770
ALLENTOWN TOY TRAIN SERVICE VICTORIA [email protected]
ALLENTOWN 804-696-1902
610-821-0740 [email protected]
CANADA
ON THE RIGHT TRACK TOY TRAIN CENTER ONTARIO
ALTOONA RICHMOND CREDIT VALLEY RAILWAY COMPANY
814-942-4345 804-288-4475 STREETSVILLE
905-826-1306
JIM'S TRAIN SHOP T S G HOBBIES [email protected]
HOMER CITY WARRENTON www.cvrco.com
724-479-2026 540-347-9212
[email protected] [email protected] TOY TRAIN WORKSHOP
www.mnsinc.com/tripi/tsg.htm CUMBERLAND
YE OLDE TRAIN & CHRISTMAS 613-833-3125
SHOPPE CHESTERFIELD HOBBIES [email protected]
BOYERTOWN MIDLOTHIAN www.toytrainworkshop.com
610-369-0755 804-379-9091
www.yeoldetrain.com [email protected] THE TRAIN ROOM
www.chesterfieldhobbies.com FERGUS
TOBY TYLER'S HOBBY CENTER 519-787-3280
PITTSBURGH DAVIS HOBBY SUPPLIES
412-653-5030 PORTSMOUTH
[email protected] 757-397-1983
[email protected]
BUSTLETON TRAIN SHOP www.davishobby.com
PHILADELPHIA
215-698-7266 LOCUST GROVE TRAINS
LOCUST GROVE
CHESTNUT TOYBOX 540-854-8955
PHILADELPHIA [email protected]
215-545-0455 www.locustgrovetrains.com
[email protected]
WEST VIRGINIA
THE CABOOSE PATRICK'S TRAINS
LEHIGHTON WHEELING
570-386-5352 304-232-0714
www.thecaboosehobbies.com [email protected]
[email protected] www.patstrains.com
SOUTH CAROLINA
EMERALD TRAIN & HOBBY
GREENWOOD
864-223-2247