Rapidline MOD 1 NW User manual

Assembly Instructions:
Tools Required:
Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler
*Tools are not included.
Skill Required:
The Assembly Skill Rating is a 5-point system that shows the degree of eort needed in assembling
a specic product. With 1 being easy for the average person and 5 requiring an expert.
For most products, two persons are recommended.
Time Required:
40 minutes
Easy Hard
Product Code : MOD 1 NW & MOD2 NW
Product Name: Modular Reception
NOTE
• As this is a commercial product, some intermediate skills may be required.
• No pre-drill holes or markings are provided on our table or desk tops.
• Please check you have all hardware before assembling.
• If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item,
required hardware part and quantity.
• Please retain your receipt as proof of purchase to validate your warranty.
• Assemble on a clean, at, smooth surface such as a rug or carpet to avoid parts from being scratched.
• Remove all wrapping materials, including staples and packing straps before you start to assemble
• Keep all hardware parts out of reach of children.
CAUTION
• Heavy product. Do not attempt to lift or move without help
• Do not tighten screws and bolts until completely assembled.
• Do not use this product unless all bolts and screws are rmly secured and tightened.
WARNING
• If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
• Failure to follow these warnings could result in serious injury.

STEP1
D1*2
D*2 z
E y X*2
IMPORTANT NOTE:
Assembly Instructions
MODEL NO:MOD1
AU
 
 


 
 

 

 







 
 
1/2 [•�+ l

STEP2
D
X
STEP3 STEP4
Z1
X and Z can be changed freely
IMPORTANT NOTE:



 
 
2/2 [•�+ l


  
D*2 z
y X*2
IMPORTANT NOTE:
STEP1

MODEL NO.:MOD2

AU
6X35
.FE X 1
S 12

� *50:193H
u 2



 
 
1/2 [•�+ l

STEP2
D
y
X
STEP3 STEP4
X and Z can be changed freely
IMPORTANT NOTE:



 
 
2/2 [•�+ l