Rapidline GSC9422 User manual

Assembly Instructions:
Tools Required:
Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler
*Tools are not included.
Skill Required:
The Assembly Skill Rating is a 5-point system that shows the degree of eort needed in assembling a specic product.
With 1 being easy for the average person and 5 requiring an expert. For most products, two persons are recommended.
Time Required:
30 minutes
Easy Hard
Product Code : GSC9422
Product Name: Rapidline Shelving Unit
NOTE
• As this is a commercial product, some intermediate skills may be required.
• No pre-drill holes or markings are provided on our table or desk tops.
• Please check you have all hardware before assembling.
• If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item,
required hardware part and quantity.
• Please retain your receipt as proof of purchase to validate your warranty.
• Assemble on a clean, at, smooth surface such as a rug or carpet to avoid parts from being scratched.
• Remove all wrapping materials, including staples and packing straps before you start to assemble
• Keep all hardware parts out of reach of children.
CAUTION
• Heavy product. Do not attempt to lift or move without help
• Do not tighten screws and bolts until completely assembled.
• Do not use this product unless all bolts and screws are rmly secured and tightened.
WARNING
• If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
• Failure to follow these warnings could result in serious injury.

PART LIST
No. COMPONENT QUANTITY
01 LH BACK 01
02 RH BACK 01
03 TOP 01
04 LH SIDE 01
05 RH SIDE 01
06 'U' FRAME 01
07 KICK PLATE 01
08 BOTTOM 01
09 SHELF 02/03/05
10 SHELF SUPPORTS 08/12/20
BOOKCASE- Parts list & Assembly instructions
12
4
5
8
7
printed on 06th Jun 2019
page 1 of 2
36
9
9
10
9
Assembly Instructions : GSC9422

1
2
STEP-1
STEP-2
AB
A
B
STEP-3
STEP-4
STEP-5 STEP-6 STEP-7
1
2
3
2
3
4
3
1
4
5
6
7
8
7
8
printed on 06th Jun 2019 page 2 of 2
10
9
4
48mm 26mm
UP
1
4
8
A
B
8
1