Raptor Series MAGNUM RT GTS10FD User manual

Your satisfaction is important to us, please let us help!
If you have any questions or concerns during the installation, our support representa-
tives are available to assist you.
Please call: 1-877-769-3765 or Live Chat at www.raptorseries.com
If you have damaged or missing parts please contact the company you purchased the
product from and notify them of the issue right away.
CAUTION: Do not install damaged parts!!!
Raptor Series Truck Accessories | P:877.769.3765 | F: 877.875.7446 | E: [e-mail]

Easy Return/Easy Exchange
Want to return an item or exchange? Not satisfied with purchase?
No problem. We strongly believe in service after the sale and we stand behind our products
and our service to you, our valued customer. There is no problem we can’t solve for you!
Items that have been installed and/or damaged after receipt, are no longer in new and
ready-to-sell condition and cannot be refunded, replaced or exchanged unless it has a man-
ufacturer defect or was damaged in shipping. In addition, we cannot accept return on items
that are not in the original packaging. Items returned in poor condition or having parts
missing will not be credited.
Please note: Your request for return or replacement must be initiated within 30 days of
delivery of your merchandise.
Did your order arrive damaged?
Please do not install damaged products. Contact the company you purchased your product
from as soon as possible and notify them of the damages. They will make arrangements
with you to assist with the problem.
Did you order the wrong part or receive the wrong item?
Don’t worry. From time to time human error can result in problems with ordering or ship-
ping. Contact the company you purchased your product from as soon as you notice the
error. Every company has their own policy on returning parts that have been ordered incor-
rectly or shipped incorrectly.
In the event that you need to ship your part back to return/exchange, please ship to the
warehouse below:
CYC Returns Warehouse
2415 Cathy Lane
Jasper, IN 47546
Raptor Series Truck Accessories | P:877.769.3765 | F: 877.875.7446 | E: [e-mail]

For Powder Coated Steel Products
CYC Engineering, Inc. guarantees the original purchaser of our products
a limited ten (10) year warranty from the date of original purchase
against manufacturer defects in materials, workmanship and finish under
normal use. The step pads are covered under warranty for 1 year. This
warranty does not include damage resulting from road hazards such as
gravel or other debris, product misuse, improper installation, impair-
ments from accidents, product modifications, product neglect or
scratches during the life of the product. This limited ten year warranty
applies only to new products and is limited to the repair or replacement
of company’s products. Warranty does not include costs of removal,
installation, labor, inconvenience or consequential damages. Original
purchaser must return defective merchandise along with the purchase
receipt, to the original place of purchase.
For Stainless Steel Products
CYC Engineering, Inc. guarantees the original purchaser of our products
a limited lifetime warranty from the date of original purchase against
manufacturer defects in materials, workmanship and finish under normal
use. The step pads are covered under warranty for 1 year. This warranty
does not include damage resulting from road hazards such as gravel or
other debris, product misuse, improper installation, impairments from
accidents, product modifications, product neglect or scratches during
the life of the product. This limited lifetime warranty applies only to new
products and is limited to the repair or replacement of company’s prod-
ucts. Warranty does not include costs of removal, installation, labor,
inconvenience or consequential damages. Original purchaser must return
defective merchandise along with the purchase receipt, to the original
place of purchase.
LIMITED TEN (10) YEAR WARRANTY
LIMITED LIFETIME WARRANTY
Raptor Series Warranty

1
Driver & Passenger
Front Bracket
Qty 6
Driver & Passenger
Center and Rear Bracket
Qty 2
Hardware:Components:
Torque Specifications:
For Rocker Panel Mount Installations
M8 through M12 bolts and nuts are set to 15-20 ft lbs.
Tools Required:
13MM SOCKET
RATCHET TORQUE
WRENCH
Rev 1
GTS10FD
GTS10FD
MAGNUM RT STEPS
Driver Side
Step Bar
Qty 1
Passenger
Side Step Bar
Qty 1
M8 x 25 mm
Hex Head Bolts
Qty 18
M8 Hex Head
Nuts
Qty 6
M8 Flat
Washers
Qty 24
M8 Lock
Washers
Qty 24
RTSPN175
Bolt/Nut Plates
Qty 6
M8 Plastic
Push Nuts
Qty 6
Armor Plates
Qty 4

1. Remove all contents from the
package and check stainless steel
tubes for any damage. Also, verify
that all components and hardware
listed above are included before
you begin installation.
2. Read installation manual and
installation drawing completely.
Understand all brackets and bolts
before installation.
3. Begin installation on the
drivers’s side. Front and Center
Bracket Cradle face to the rear of
truck and Rear Bracket Cradle
faces to front of truck.
2
Note: When installing the brackets and bars, all hardware must be left loose until all the items are attached.
3
Rev 1
GTS10FD
4a
Front
4. Fasten each bracket using two (2) M10 x 30MM Hex Head Bolts,
two (2) M10 Flat Washers, two (2) M10 Lock Washers.
FRONT
BRACKET
M10 FLAT
WASHER
M10 LOCK WASHER
M10 X 30 MM
HEX HEAD BOLT
M10 FLAT
WASHER
M10 LOCK
WASHER
M10 X 30 MM
HEX HEAD BOLT
4b

3
Rev 1
GTS10FD
M10 FLAT
WASHER
M10 LOCK WASHER
M10 X 30 MM
HEX HEAD BOLT
5a
Front
CENTER AND
REAR BRACKET
5. Fasten each bracket using two (2) M10 x 30MM Hex Head Bolts, two (2) M10 Flat Washers, two (2) M10
Lock Washers.
M10 X 30 MM
HEX HEAD BOLT
M10 FLAT WASHER
M10 LOCK WASHER
5b

4
Rev 1
GTS10FD
Installing the Step Bar
6. Line up mounting points on
the step bar with the
mounting holes in each
bracket.
7. Fasten the step bar to each
bracket using one (1)
RTSPN175 Bolt/Nut Plate,
one (1) Plastic Push Nut,
one (1) M8 Hex Head Nut,
two (2) M8 Lock Washers, two
(2) M8 Flat Washers and one
(1) M8 x 25MM Hex Head Bolt.
8. Adjust the bars front/back
and up/down to desired
placement. Once you have the
step positioned, tighten until
the split lock washer is flat
between the bolt head and flat
washer. Do not over tighten.
9. When all hardware is in
place, everything must be
tightened. See page 1 for
torque specifications. Repeat
these steps for opposite side
installation.
OPTIONAL:
If you wish to install the Front
Armor Plates, begin by
thoroughly cleaning the front
side of the front step where
the Front Armor Plate will
attach.
1. Remove adhesive
protection from the Front
Armor Plate.
2. Carefully line up with the
front side of the front step. Be
careful not to let the side
overhang as they could peel
o over time.
Once lined up, firmly press the
Front Armor Plate on the step
to ensure complete adhesion.
Repeat these steps for
opposite side.
1
Driver Side
2
MOUNTING POINTS
ON INSIDE OF
STEP BAR
7
RTSPN175
BOLT/NUT PLATE
M8 PLASTIC
PUSH NUT
M8 FLAT
WASHER
M8 LOCK
WASHER
M8 HEX
HEAD NUT
MOUNTING
BRACKET
M8 FLAT
WASHER
M8 LOCK
WASHER
M8 x 25MM
HEX HEAD
BOLT