Rata LGF04S User manual
NZ: 0800 802 478 AU: 1800 962 022
LGF04S
LOG FORK
LOG FORK
USER MANUAL
NZ: 0800 802 478 AU: 1800 962 022
NZ: 0800 802 478 AU: 1800 962 022
2 3
CONTENTS:
3 Acquistion
4 Warranty
5 Maintenance & Safety
6 Safety Instructions
7 Safety Precautions
9 Setting up the Machine
11 Parts Diagram
Warranty Registration:
Scan this QR code to ll out the Warranty Registration Form:
Or type this URL into your browser: hubs.la/Q012gg540
Delivery
Upon delivery of the machine, carefully check for transit damage and report
any defects to both the transport company & Rata immediately. Immediately
reporting transport damage is essential in getting remediation from the freight
provider.
Take the time to go over your new machine and ensure that all nuts & bolts are
appropriately tightened before using. Damage caused by xtures or fasteners
loosened in transit is not covered by warranty.
Please then visit our website and complete the warranty registration form
above. The commencement of warranty is based on the purchase date of your
machine, provided the product register form is received at Rata Equipment
within 14 days of the purchase date. Warranty claims will only be processed
upon receipt of proof of purchase and submission of the warranty registration
form within 14 days of purchase.
Welcome
Rata Equipment would like to take this opportunity to welcome you as the new
owner of a Rata machine. We want your investment to be the most efcient and
reliable piece of equipment it can be. This manual has been produced to assist
in the correct operation, maintenance and care of your machine.
The safe operation and maintenance of your machine is very important
to prevent any personal injury and/or damage. Read and fully understand
the following instructions before using your machine or carrying out any
maintenance.
Machine Identication
The machine serial number is engraved into an information plate. Please
record the machine serial number in the warranty registration form on the Rata
website.
Ensure you have the machine serial number to hand when contacting us about
your machine for any reason, or ordering parts.
ACQUISITION
NZ: 0800 802 478 AU: 1800 962 022
NZ: 0800 802 478 AU: 1800 962 022
4 5
WARRANTY MAINTENANCE & SAFTEY
Rata Equipment warrants new products sold by it, to be free from defects in
material and workmanship for a period of 12 months after the date of purchase
to the initial user. This warranty is for the replacement or repair of any part
found to be defective during the warranty period. This warranty only applies to
new Rata products.
Should the product fail as a result of a fault in material or sub-standard
workmanship by the manufacturer within the warranty period then Rata
Equipment will agree to repair this product subject to the conditions of this
warranty.
This warranty excludes any transport costs or damage and excludes all normal
maintenance costs.
Rata Equipment will not pay for mileage, freight, courier costs, oil, grease or
any other expendable materials.
As the use of the Rata product is outside our control, Rata Equipment accepts
no liability for lost earnings or down time directly or indirectly caused by the
machines performance.
Replacement parts provided under the terms of this warranty are covered for
the remainder of the warranty period applicable to the product in which they
were installed as if such parts were original components of that product.
No warranty work is to be started without rst getting approval and following
the correct warranty procedures as set out by Rata Equipment. Rata Equipment
will not under any circumstances pay for or repair any damage caused by
misuse or neglect of any machine.
All warranty issues and claims are totally at the discretion of Rata Equipment.
Warranty Exclusions: loose bolts and screws including worn holes for the same,
belts, tyres, blades, tines, PTO shafts, disc bearings and hydraulic hoses, these
parts are generally not covered by this warranty.
Delivery
The machine is delivered fully assembled, however, before use carefully check
the entire machine for transit damage and report any problems immediately.
Maintenance and Lubrication
Take care to keep the oor area clean when performing maintenance
to the machine. Help protect our environment and prevent injuries
from falls by cleaning up any spilled or leaking uids with absorbent
products. Take care to dispose of contaminated rags or absorbents
in accordance with your local environmental regulations. Put away
tools and roll up any air lines or electrical cords that were used when
making repairs to the equipment and dispose of scrap materials or
worn out parts in an appropriate manner.
Never crawl under the machine to make repairs or adjustments or
replace parts, unless you have properly blocked and supported the
frame. The frame must be secured in a xed position in order to
prevent it from moving or falling before making any attempt to work
underneath. Use suitable shop stands or lifting devices that can
support the entire weight of the machine. Never use cement blocks,
bricks, hollow tiles or other props that may crumble or collapse
under continuous load.
Wear gloves when changing points and/or tines as the edges can
become extremely sharp when worn.
Regularly check all nuts and bolts for tightness and secure if loose.
Replace worn out or damaged machine components.
Establish a good routine for regular inspection, lubrication and
maintenance in order to keep the machine in good operating
condition.
Use extreme caution around suspected hydraulic leaks or damaged
hose lines. Hy¬draulic uid under pressure can be extremely
dangerous. Always wear hand and eye protection. Always lower
the machine to the ground and release hydraulic pressure before
performing maintenance to the hydraulic system.
NZ: 0800 802 478 AU: 1800 962 022
NZ: 0800 802 478 AU: 1800 962 022
6 7
SAFTEY INSTRUCTIONS SAFETY PRECAUTIONS
WARNINGS
1. Rata Industries Group Ltd takes no responsibility for damage/s to people
or property caused by the inappropriate or abnormal use of any of its
products.
2. Carefully read and take note of the following warnings before attempting
to operate the Equipment.
Warning: Ensure the implement is securely connected to the loader or
Telehandler.
Warning: Check that all moving parts are in good repair and that all the
fasteners are correctly tightened.
Warning: Never allow any person to ride on the Implement.
Warning: Do not exceed the maximum weight/capacity specied by the
manufacturer of the implement.
Warning: Foreign objects can cause extensive damage to the machine and
result in injury to the operator. Make sure there are no foreign
objects in your path of travel.
Warning: Before using the implement the operator should ensure that this
manual is read and fully understood.
Warning: Obey all road rules and regulations while using the implement on
the road.
Warning: The implement may fall rapidly causing injury. Always stay clear of
implement when being lowered or raised.
Warning: Never touch hydraulic hoses without protective clothing. An
almost invisible leak can penetrate the skin.
Product Safety Precautions
Make certain all safety decals and reectors are applied to your machine.
Refer to your local governmental regulations for more information on proper
procedures and markings for safe road transport in your area.
Do not travel over 40 km/h. Reduce speed in adverse weather, when turning or
travelling on inclines or uneven ground. Always start and stop slowly.
DANGER! Watch for wires.
Take care when transporting equipment around power lines. Serious injury or
death to the operator or bystanders will result through direct or indirect contact
with power lines.
The operator is responsible at all times to comply with the local government
regulations and ensure the safe transport of the implement when transporting
large or oversized implements on public or private roadways. Careful
consideration must be given in order to prevent accidents with other vehicles
and avoid coming in contact with obstacles such as: bridges, tunnels,
overpasses, guard rails, road signs, trafc lights, power lines, public utilities,
and other structures that may be encountered along the chosen route. In some
jurisdictions the operator may be required to obtain special permits or arrange
for escorts before transporting oversized equipment. Rata Equipment is not
liable for personal or property damage caused by inappropriate, unauthorized
or unsafe transport or operation of equipment.
Never use the hydraulic grab when there are bystanders in the area of the
implement movement zone. Be certain all persons are clear of working area in
and around the machine whenever using the machinary, raising or lowing the
grab or in any way using the hydraulic system.
Be alert when walking around the machinery to avoid tripping over or colliding
with the tines or grab. Severe head or body injury could result.
NZ: 0800 802 478 AU: 1800 962 022
NZ: 0800 802 478 AU: 1800 962 022
8 9
PRELIMINARY STEPS:
1. Use the parts diagram to ensure that all components of the machine are
present and correct.
2. Inspect for freight damages and factory defects. If the product passes
inspection, proceed with using the attachment. If it does not pass, contact
the place of purchase or Rata Equipment directly to resolve the issue.
SETTING UP THE MACHINE
1.
Line up implement with the hitch on
your machine.
2.
Ensure hooks are completely attached
to the machine hitch.
2.
And/or ensure pins are lined up. 3.
Ensure levers for pins are pushed over
all the way so that the pins are fully
engaged, if applicable.
Make sure that the tractor is shifted into park before getting out to remove lock
pins. Never remove lock pins when the implement is sitting on uneven ground
where tipping could occur.
Never remove transport lockout devices or raise/lower the grab unless cylinders
are completely full of oil. Failure to properly charge the grab hydraulics with
oil could allow free fall of the grab, causing damage to the equipment and
possible injury to the operator or bystanders.
Never use the grab or forks by any mechanical method! Always charge the
hydraulic system rst and use it to raise and lower the grab. Stand clear of the
machine and watch for overhead hazards or objects in the possible fall zone
when in action.
Thank you for taking the time to read this.
MODEL WIDTH (M) FORK LENGTH (M) WEIGHT (KG)
LGF01 1.2 1.2 100
LGF04S 1.2 1.2 250
LGF04T 1.5 1.2 360
SPECIFICATIONS
CAPACITY (KG) MINIMUM HP HYDRAULIC GRAB
2,000 80 NA
2,000 95 1
2,000 120 2
NZ: 0800 802 478 AU: 1800 962 022
NZ: 0800 802 478 AU: 1800 962 022
10 11
3. 4.
Cut cable tie holding the hydraulic
hoses, taking care not to cut the hoses
themselves.
5.
Connect hydraulic hose couplings from
the implement to the corresponding
couplings on your machine.
You are now
ready to use your
Log Fork.
PARTS DIAGRAM
Below is a detailed parts diagram for your reference when purchasing spare parts.
CODE DESCRIPTION QUANTITY NOTES
1. LGFTRS Log Fork Trunk - Single 1
2. 26541 Ram Twin ram log fork 1
3. LG02 LGF04 pivot pin 1Not including nut and washer
4. P25-190 Machine Pins Versatile
Grapple
1Base of ram
5. P25-110 Machine Pins 1Top of ram spear
6. Hoses and Fittings 0800 802 478 ext. 1 (Spare Parts)
1.
2.
4.
6.
5. 3.
Your Accredited Dealer is:
NZ: 0800 802 478 AU: 1800 962 022
Log Fork User Manual 2022
Other Rata Farm Equipment manuals
Popular Farm Equipment manuals by other brands
Schaffert
Schaffert Rebounder Mounting instructions
Stocks AG
Stocks AG Fan Jet Pro Plus 65 Original Operating Manual and parts list
Cumberland
Cumberland Integra Feed-Link Installation and operation manual
BROWN
BROWN BDHP-1250 Owner's/operator's manual
Molon
Molon BCS operating instructions
Vaderstad
Vaderstad Rapid Series instructions
