Razer HAMMERHEAD PRO HYPERSPEED Use and care manual

.
RAZER HAMMERHEAD PRO HYPERSPEED
MASTER GUIDE

FOR GAMERS. BY GAMERS .™
1
Reforged to revolutionize the soundstage—the Razer Hammerhead Pro
HyperSpeed returns with game-changing versatility and best-in-class
connectivity. Supercharged with Razer™HyperSpeed technology, take the
plunge into unparalleled audio freedom as you dominate in a blaze of RGB
glory.

FOR GAMERS. BY GAMERS .™
2
CONTENTS
1. WHAT'S INSIDE.......................................................................................................................................3
2. WHAT'S NEEDED ....................................................................................................................................4
3. LET'S GET YOU COVERED........................................................................................................................5
4. TECHNICAL SPECIFICATIONS ..................................................................................................................6
5. SETTING UP YOUR RAZER HAMMERHEAD PRO HYPERSPEED ...............................................................7
6. USING YOUR EARBUDS.........................................................................................................................13
7. SAFETY AND MAINTENANCE................................................................................................................19
8. LEGALESE..............................................................................................................................................20

FOR GAMERS. BY GAMERS .™
3
1. WHAT'S INSIDE
▪Razer Hammerhead Pro HyperSpeed
A. Backlit function button Powered by Razer ChromaTM
RGB
▪Wireless charging case
B. Status indicator
C. USB Type C charging port
D. Wireless charging surface
▪USB Type C wireless dongle
▪USB Type A to USB Type C charging cable

FOR GAMERS. BY GAMERS .™
4
▪USB Type A to USB Type C adapter cable
▪Silicon ear-tips in 3 sizes (S, M*, L)
*Pre-installed with the earbuds.
▪Important Product Information Guide
2. WHAT'S NEEDED
PRODUCT REQUIREMENTS
▪Devices with Bluetooth audio capability* / USB Type C or USB Type A port
RAZER AUDIO APP REQUIREMENTS
▪iOS 14 / Android 10 (or higher) device with Bluetooth connectivity
▪Internet connection for app installation
*Compatible with Android, iOS, iPadOS, PC, PlayStation®4, PlayStation®5, and Nintendo Switch.

FOR GAMERS. BY GAMERS .™
5
3. LET'S GET YOU COVERED
Your product’s serial
number can be found here.
Register your product and score exclusive benefits
razerid.razer.com/warranty

FOR GAMERS. BY GAMERS .™
6
4. TECHNICAL SPECIFICATIONS
HEADPHONE
▪Frequency response: 20 Hz –20 kHz
▪Impedance: 16 Ω
▪Sensitivity: 91 db @ 1 mW / 1 kHz
▪Input power: 5 mW (max input)
▪Drivers: 10 mm
MICROPHONE
▪Pickup pattern: Advanced ENC beamforming
▪Signal-to-Noise Ratio: 64 dB
▪Sensitivity (@1KHZ): -26 dBFS
▪Noise cancelling: App adjustable hybrid ANC
▪IPX rating: IPX4
▪Lighting: Razer Chroma™RGB
CHARGING
▪USB Type C
▪Wireless charging case
OTHER CONTROLS
▪Remappable touch controls
▪Auto Pause
CONNECTION TYPE
▪Bluetooth
▪2.4 GHz wireless via USB Type C dongle

FOR GAMERS. BY GAMERS .™
7
5. SETTING UP YOUR RAZER HAMMERHEAD PRO HYPERSPEED
CHARGING YOUR EARBUDS
For first-time use, connect the charging case to a USB port using the charging cable or place it on a
wireless charging pad* without removing the earbuds. The charging case and earbuds can be charged
independently for subsequent use.
*Wireless charging pad not included.
OR
3H
0%
100%
USB
Type C

FOR GAMERS. BY GAMERS .™
8
CONNECTING TO YOUR EARBUDS
A. Via Bluetooth
While inside the charging case, open the lid and wait for the earbuds to enter pairing mode.
When trying to connect your Razer product, remember to keep it within 1 meter of your
mobile device. By default, the earbuds will first search for the USB Type C wireless dongle
before activating pairing mode.
Activate Bluetooth on your device and select "Razer Hammerhead Pro HyperSpeed (BT)" from
the list of devices found.
Razer
Hammerhead Pro
HyperSpeed (BT)
PAIRING
1 M
secs.
10

FOR GAMERS. BY GAMERS .™
9
Wait until both devices are connected. You will hear an audio prompt when the earbuds have
successfully paired and connected to your device.
If the earbuds fail to connect to your device, the earbuds will stay in search mode and power
off after 3 minutes. If this happens, place the earbuds back inside the charging case and repeat
the steps above.
Once the earbuds have been paired, they will automatically try to connect to that
paired mobile device every time the charging case's lid is opened or the earbuds are
powered on. Your earbuds can only connect to one mobile device at a time.
BLUETOOTH CONNECTED

FOR GAMERS. BY GAMERS .™
10
B. Via USB Type C wireless dongle (2.4 GHz)
Plug the USB Type C wireless dongle into your device.
If your earbuds use Bluetooth as the audio source, tap the function button thrice on any
earbud to set the USB Type C wireless dongle as the audio source.
USB
Type A
USB
Type C
OR
OR
3X
TAP
3X
TAP

FOR GAMERS. BY GAMERS .™
11
This step is only applicable if the earbuds are connected to your device via Bluetooth.
On your device (if applicable), set the Razer Hammerhead Pro HyperSpeed as the default Input
and Output Device.
When using the earbuds with compatible devices, set the Razer Hammerhead Pro
HyperSpeed 2.4 as the default input and output device (if applicable).
Wait until your earbuds are connected to the USB Type C wireless dongle.
Razer Hammerhead Pro
HyperSpeed 2.4
Razer Hammerhead Pro
HyperSpeed 2.4
HYPERSPEED WIRELESS
USB
Type A
USB
Type C
OR

FOR GAMERS. BY GAMERS .™
12
PERSONALIZE YOUR MOBILE EXPERIENCE
RAZER AUDIO APP (MOBILE)
Remap touch gestures, toggle Do Not Disturb to block incoming calls while gaming, customize EQ
settings, and even experience full RGB lighting customization from your mobile device.
Only available on iOS 14 / Android 10 (or higher) devices with Bluetooth connectivity
Razer Audio
RZR.TO/AUDAPP
(For China Only)
OR

FOR GAMERS. BY GAMERS .™
13
6. USING YOUR EARBUDS
SWITCHING BETWEEN AUDIO SOURCES
When connected to any audio source, tap the function button thrice to switch between the USB Type
C wireless dongle and Bluetooth audio source or vice versa.
POWER ON/OFF
Place the earbuds inside the charging case and close the lid to power off the device. Opening the lid if
they are in the charging case will power them on.
If the earbuds are left idle outside the charging case for a few minutes, you will hear an audio prompt,
and then the earbuds will power off. Simply wear the earbuds properly to power them on again.
3X
TAP
3X
TAP
OR
USB Type C
wireless dongle
(2.4 GHz)
Bluetooth

FOR GAMERS. BY GAMERS .™
14
Alternatively, you can tap and hold the function button on each earbud for at least 2 seconds to
power them on. You will hear an audio prompt from each earbud once powered on.
BATTERY LEVEL
When unplugged and opened, the charging case will show the battery status of the charging case.
Indicator
Status
Static green
Battery full
Static orange
Battery low
Blinking red
Battery critical
POWER ON
secs.
2
secs.
2
POWER OFF
OR
POWER ON

FOR GAMERS. BY GAMERS .™
15
UNDERSTANDING RAZER SMARTSWITCH
With the Razer Hammerhead Pro HyperSpeed simultaneously connected to a PC or gaming console
(via USB Type C wireless dongle) and a mobile device (via Bluetooth), you'll be able to use the earbuds
for incoming/outgoing/conference calls from a connected Bluetooth device and switch back to the
game audio without removing the earbuds.
The following behaviors below will help you understand how your earbuds respond to audio source
switching and incoming/outgoing/conference calls when your earbuds are connected to a Bluetooth
device and the USB Type C wireless dongle:
Activity
Razer SmartSwitch behavior
Streaming via USB
Type C wireless
dongle
▪The earbuds will automatically switch to Bluetooth audio source for
incoming/outgoing/conference calls from your mobile device and resume
using the USB Type C wireless dongle after each call.
You can deactivate automatic source switching for incoming calls by
enabling your earbud's Do Not Disturb feature on the Razer Audio app.
▪Audio from the connected mobile device will ONLY automatically stream on
the earbuds if no audio is present or streaming on the USB Type C wireless
dongle.
▪Auto-pause on streamed audio when switching audio sources depends on
the app you're using (e.g., Spotify, Apple Music).

FOR GAMERS. BY GAMERS .™
16
Streaming via
Bluetooth
▪When you switch to the USB Type C wireless dongle audio source, your
earbuds will remain connected to your mobile device via Bluetooth.
However, the Razer Audio app will disconnect from your mobile device.
▪Auto-pause on streamed audio when switching audio sources depends on
the app you're using (e.g., Spotify, Apple Music).
Not streaming on
any audio source
Audio will play on the first audio source that streams audio.
GAMING MODE
When using Bluetooth as the audio source, triple tap, then hold the last tap for at least 2 seconds on
any earbud to activate gaming mode. Once enabled, your earbuds will function at a lower latency,
giving you real-time audio feedback while gaming. Repeat the same gesture to deactivate this feature.
For best performance, keeping your earbuds within a very close distance of the audio source is
recommended.
secs.
2
3X
TAP

FOR GAMERS. BY GAMERS .™
17
ACTIVE NOISE CANCELLATION (ANC) / QUICK ATTENTION MODE
Active Noise Cancellation (ANC) helps eliminate background noise for enhanced immersion, while
Quick Attention Mode improves awareness by feed-forwarding your surroundings into the earbuds.
While connected to any audio source, tap and hold on any earbud for at least 2 seconds to activate or
deactivate ANC and repeat to activate Quick Attention Mode.
An audio prompt will notify you when ANC and Quick Attention Mode have been enabled.
Complete customization of these functions can be made using the Razer Audio app. Setting the
ANC level appropriate to the noise level of your surroundings or your preference from the Razer
Audio app is recommended.
FUNCTION BUTTON QUICK REFERENCE
The following default gestures are only available when the earbuds are powered on with Bluetooth as
the audio source. These gestures can be remapped using the Razer Audio App.
Action
Effect
Tap
Play/pause*
Accept incoming call or end current call
Tap and hold for 2 seconds
Reject incoming call or end current call
Power on the corresponding earbud
Cycle between Enable ANC, Disable ANC and Enable Quick Attention
Mode*
Tap and hold for 4 seconds
Activate Bluetooth pairing mode*
Double tap
Accept incoming call or switch calls
NOISE CANCELLATION (ANC)
QUICK ATTENTION MODE
ANC ON /
ANC OFF
AMBIENT
ON
secs.
2

FOR GAMERS. BY GAMERS .™
18
Skip to the next track when playing media
Double tap, then hold the last
tap for 2 seconds
Decrease volume (on the left earbud)*
Increase volume (on the right earbud)*
Triple tap
Switch between Bluetooth and USB Type C dongle audio source*
Triple tap, then hold the last
tap for 2 seconds
Enable/disable Gaming Mode
While in pairing mode, clear paired devices
*You can also use these functions when using the USB Type C wireless dongle as the audio source.
USING THE SILICONE EAR-TIPS
The silicone ear-tips offer increased comfort, sound isolation, and security. Various size options let
you achieve a comfortable, secure fit that reduces unwanted noise.
Removal Replacement
Due to individuals' different ear canal sizes, it's recommended to interchange the ear-tips to a
larger or smaller size to improve comfort and sound quality and achieve a proper seal.

FOR GAMERS. BY GAMERS .™
19
7. SAFETY AND MAINTENANCE
SAFETY GUIDELINES
To achieve maximum safety while using your Razer Hammerhead Pro HyperSpeed, we suggest that
you adopt the following guidelines:
If you have trouble operating the device properly and troubleshooting does not work, unplug the
device and contact the Razer hotline or contact support.razer.com for assistance.
Do not take apart the device, and do not attempt to operate it under abnormal current loads. Doing
so will void your warranty.
Keep the wireless charging case away from liquid, humidity, or moisture. Before charging your
earbuds, make sure they are completely dry before placing them inside the wireless charging case.