Razor kixi User manual

Owner’s Manual
Read and understand this entire manual before
allowing child to use this product!
For assistance contact Razor. DO NOT RETURN TO STORE.
US_130401
NOTE: Manual illustrations are for demonstration purposes only.
Illustrations may not reflect exact appearance of actual product.
Specifications subject to change without notice.
Please have your 21 character product I.D. code ready before
contacting Razor for warranty assistance and/or replacement parts.
Product I.D. Code: ____________ - ____________ - ____________
Balance Bike

1
AN IMPORTANT MESSAGE TO PARENTS:
Kixi®products are intended to allow younger children to learn and to enjoy their
early experiences using ride-on toys. The Kixi Balance Bike is designed to help
children learn and develop skills of balance and motion by providing supervised,
low speed, foot-operated learning opportunities that a child can use to develop
riding skills that can be built upon in years to come.
Adult supervision is required as children learn and grow because very young
children do not understand the risks of riding in areas with cars and are at a
very high risk of falling and injuring themselves as they first experience the fun
– and the risks – of riding something using their own power and skill. Protecting
children as they learn is an important part of the developmental process.
This manual contains important information. For your child’s safety, it is your
responsibility to review this information and make sure that you instruct your
child to follow all warnings, cautions, instructions and safety topics. Razor USA
recommends that you periodically review and reinforce the information in this
manual with younger riders and that you inspect and maintain your child’s Kixi
Balance Bike to insure their safety.
GENERAL WARNING: Balance bike riding can be a hazardous
activity. Certain conditions may cause the equipment to fail without fault of the
manufacturer. Balance bikes can and are intended to move, and it is therefore
possible to get into dangerous situations and/or lose control and/or fall. If such
things occur you can be seriously injured or die. LIKE ANY OTHER MOVING
PRODUCT, USING A BALANCE BIKE CAN BE A DANGEROUS ACTIVITY AND
MAY RESULT IN INJURY OR DEATH EVEN WHEN USED WITH PROPER SAFETY
PRECAUTIONS. USE AT YOUR OWN RISK AND USE COMMON SENSE.
This manual contains many warnings and cautions concerning the consequences
of failing to maintain, inspect or properly use your Kixi Balance Bike.
Because any incident can result in serious injury or even death, we do not
repeat the warning of potential serious injury or death each time such a
possibility is mentioned.
WARNING:
• Protective equipment should be worn. Not to be used in traffic.
• This toy has no brake.
• Do not allow children under age three (3) to use the balance bike. The
recommended rider age of 3 years is only an estimate, and can be affected
by the rider’s size, weight or skills. A rider must be tall enough to walk the
bicycle while sitting comfortably in the seat, putting both feet flat on the
ground. Any rider unable to fit comfortably on the balance bike should not
attempt to ride it. Close adult supervision is required.
• Always pay attention to where your child is going.
• This toy should be used with caution, since skill is required to avoid falls or
collisions causing injury to the user or third parties.
• Always wear safety equipment, such as helmet, knee pads and elbow pads.
• Always wear a helmet when riding a balance bike and keep the chinstrap
securely buckled.
• Always wear closed toe shoes.
• Do not ride on streets, where cars may be present. Ride on smooth, paved
surfaces without loose debris, such as rocks or gravel, and away from
motor vehicles.
• Avoid sharp bumps, drainage grates, and sudden surface changes as the
balance bike may suddenly stop.
• Avoid surfaces with water, mud, ice, sand, gravel, dirt, leaves and other
debris. Wet weather impairs traction, stopping, and visibility.
• A sudden or sharp turn of the handlebars may cause the balance bike to tip over.
• Do not ride at night or when visibility is impaired.
• Obey all local traffic and bike laws and regulations.
• Watch out for pedestrians.
• Rider should stop the balance bike with their feet on the ground. Never allow
your child to exceed walking pace on the balance bike. Avoid excessive
speed associated with downhill rides.
• Do not exceed 44 lb (20 kg) total weight on the Kixi Balance Bike.
• Rider weight does not necessarily mean a child’s size is appropriate to fit or
maintain control of the balance bike.
• A parent’s decision to allow his or her child to ride this product should be
based on the child’s maturity, skill and ability to follow rules.
ACCEPTABLE RIDING PRACTICES AND CONDITIONS
Direct parental supervision is required at all times. Balance bikes are meant to
be used only in controlled environments, free of potential traffic hazards and
not on public streets. Do not allow your child to ride a balance bike in any areas
where vehicle traffic is present. Child must maintain a hold on the handlebars
with both hands at all times. Never allow more than one child at a time to ride
a balance bike. Never use near steps, sloped driveways, hills, roadways, alleys
or swimming pool areas. Stop the balance bike by placing feet on the ground.
PROPER RIDING ATTIRE
Always ensure child is wearing proper protective equipment, such as an
approved safety helmet. A helmet may be legally required by local law or
regulation in your area. A child should always wear closed toe shoes, never
ride barefooted or in sandals, and keep shoelaces tied and out of the way of the
wheels. Knee pads and elbow pads are recommended.
FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS
FURTHER INCREASES RISK OF SERIOUS INJURY. USE AT YOUR OWN RISK
AND WITH APPROPRIATE AND SERIOUS ATTENTION TO SAFE OPERATION.
USE CAUTION.
WARNING: ALWAYS INSPECT BALANCE BIKE PRIOR TO RIDING.
Properly inspecting and maintaining your balance bike can reduce the risk of
injury. Always inspect your balance bike before riding and regularly maintain it.
Replace worn parts when they occur.
WARNING: CHECK LOCAL LAWS REGARDING BALANCE BIKE USE.
Check local laws and regulations to see where and how you may use your
balance bike legally. In many states and local areas balance bike riders are
required BY LAW to wear a helmet. Check local laws and regulations regarding
laws governing helmet use and balance bike operation in your area.
Safety Warnings .............................................................................................. 1
Before You Begin.............................................................................................. 2
Assembly Instructions...................................................................................3-4
Balance Bike Parts ........................................................................................... 5
How to Ride/Check Before Riding ................................................................... 6
Safety Reminders/Warranty ............................................................................ 7
SAFETY WARNINGS
CONTENTS

Handlebar GripHandlebar
Fork
Front Wheel
Rear Wheel
Seat
Foot Rest
Seat Post Clamp
2
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers at www.razor.com
or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the product I.D. code (located on the frame) available
for better assistance.
Adult assembly required. Remove contents from box. Inspect the contents for scratches in the paint and/or dents that
may have occurred during shipping. Because your balance bike was partially assembled and packed at the factory,
there should not be any problems, even if the box has a few scars or dents.
BEFOREYOU BEGIN
WARNING: DO
NOT USE NON-RAZOR
PRODUCTS WITH YOUR
KIXI BALANCE BIKE.
Kixi Balance Bikes have been
built to certain Razor design
specifications. The original
equipment supplied at the time
of sale was selected on the
basis of its compatibility with
the frame and all other parts.
Certain aftermarket products
may not be compatible and will
void the warranty.
Product I.D. Location:
• Barcode on side of box
(not shown)
• Frame
qRequired Tool
4 mm Allen wrench
(Included)

MAX
MAX
3
ASSEMBLY INSTRUCTIONS
qFront Wheel
WARNING: Failure to
properly install and tighten the
handlebars may cause the rider
to lose control and fall. If you do
not understand these instructions,
contact Razor customer care for
assistance.
WARNING: Check
handlebar grips regularly for wear
or damage, as grips are designed
to aid in gripping handlebars
and to provide some protection
against possible impact. Replace
immediately if worn, torn,
damaged or missing.
WARNING: Failure to
properly install and tighten the seat
may cause the rider to lose control
and fall. If you do not understand
these instructions, contact Razor
customer care for assistance.
qHandlebar
qSeat

4
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers at www.razor.com
or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the product I.D. code (located on the frame) available
for better assistance.
ASSEMBLY INSTRUCTIONS
To adjust the height of the handlebar and seat, loosen the clamp using a 4 mm Allen wrench. Adjust to the desired
height and retighten the lamp to lock into place.
The MAX line indicates the highest point at which the seat and handlebar can be safely secured. To adjust the height
of the seat, loosen the seatpost clamp with a 4 mm Allen wrench, raise seat with seatpost attached to the height
desired, but ensure that the MAX line is no higher than the top edge of the clamp and retighten to secure.
To adjust the height of the handlebar, loosen the handlebar clamp with a 4 mm Allen wrench, raise the handlebar to
the height desired, but ensure the MAX line is no higher than the top edge of the clamp and retighten to secure.
qHandlebar and Seat Height Adjustment

12321
45
5
9
4
87-27
7-28
8
6
10-1
10
7-27
7-28
7-1
7-1
5
BALANCE BIKE PARTS
1. Handlebar End Caps
2. Handlebar Grips
3. Handlebar
4. Collar Clamp
5. Headset
6. Fork
7. Wheel
7-1. Wheel Spacer
7-2. Wheel Bearing
8. Axle Bolt
9. Seat w/ Post
10. Foot Rest
10-1. Foot Rest Screw
Keep your Balance Bike working with genuine Razor parts. Visit our website or e-mail us for more information on spare part availability.
(Specifications subject to change without notice.)

6
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers at www.razor.com
or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the product I.D. code (located on the frame) available
for better assistance.
HOW TO RIDE
CHECK BEFORE RIDING
A rider must be tall enough to walk the bicycle while sitting comfortably in the seat, putting both feet flat on the ground.
The rider first walks the bicycle while standing over the seat, then while sitting in the seat. Eventually, the rider feels
comfortable enough to increase speed and “scoot” while riding the bicycle and, lastly, to lift both feet off the ground
and cruise while balancing on the two wheels. Once balance is achieved, the rider may feel comfortable enough to use
the foot rest, bringing one or both feet completely off the ground while coasting. The rider stops the balance bike by
placing both feet on the ground. This process is learned over time and can take a day or two or a few months depending
on the age and readiness of the child.
When your child is starting out, do not hold the bike, but lightly support your child (only if needed) by holding on to the
back of their jacket or shirt. This will give them a sense of control and the feel of the bike in order to learn what they
need to do to balance it. It is helpful for new, younger riders to start on open grassy areas or dirt paths if available while
first getting used to their balance bike and gaining some confidence and building their skills.
qLoose Parts
Check and secure all fasteners before every ride. Check that the handlebars and seat are tightened securely to the
frame. There should not be any unusual rattles or sounds from loose parts or broken components.
qWheels
Under normal circumstances and conditions, Razor wheels are maintenance free. Nonetheless, it is the responsibility
of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for proper tightness, and for
loose parts. When a wheel develops play, this is an indication of excess wear and replacement is necessary. Replace
immediately with only genuine Razor wheels. Worn wheels are considered normal wear-and-tear and are not covered
by the Razor Warranty. Wheels other than genuine Razor wheels may not be compatible with your Kixi Balance Bike.
The use of anything other than genuine Razor replacement parts may affect your safety and will void your warranty.
qCleaningYour Bike
Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents, as they may damage the
surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners, as they may damage or dissolve the plastic
components or soften the decals or decal adhesive.

7
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers at www.razor.com
or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the product I.D. code (located on the bottom of the
deck) available for better assistance.
Razor Limited Warranty
The manufacturer warranties this product to be free of manufacturing defects
for a period of 6 months from date of purchase. This Limited Warranty does
not cover normal wear and tear, or any damage, failure or loss caused by
improper assembly, maintenance, or storage.
This Limited Warranty will be void if the product is ever:
• used in a manner other than for recreation;
• modified in any way;
• rented.
The manufacturer is not liable for incidental or consequential loss or damage
due directly or indirectly to the use of this product.
WARRANTY
Razor does not offer an extended warranty. If you have purchased an extended
warranty, it must be honored by the store at which it was purchased.
For your records, save your original sales receipt with this manual.
US_130401
SAFETY REMINDERS
q q
q
PRE-RIDE CHECKLIST
DO NOT RETURNTO STORE
Failure to follow these instructions may damage
your product and void your warranty.
q
Printed in China for:
Razor USA LLC
Copyright © 2003-2013 Razor USA, LLC. All rights reserved. Kixi, RAZOR and the Razor Logo
Design are among the registered trademarks of Razor USA LLC in the United States and/
or select foreign countries. The Trikke technology is patented in the United States and select
foreign countries by Trikke Tech, Inc. and licensed to Razor USA LLC for this product. Trikke is a
registered trademark of the Trikke Tech, Inc. in the United States and select foreign countries,
and is licensed to Razor USA LLC for this product.
Be Careful!
This product is not for aggressive or trick riding. Avoid steep
inclines and don’t ride too fast — you can lose control and fall.
Skateboard parks are not designed for young riders. Never ride
in traffic or on the street and watch your surroundings for cars,
pedestrians, bikers, boarders and skaters.
Maintain a hold on the handlebars at all times.
Loose Parts
Check and secure all fasteners before every ride. Check that the
handlebars and seat are tightened securely to the frame. There
should not be any unusual rattles or sounds from loose parts or
broken components.
Replacement Parts
Replace worn or broken parts immediately. Visit www.razor.com
or contact Razor customer care for replacement parts.
Safety Gear
Always wear proper protective equipment, such as an approved
safety helmet, elbow pads and kneepads. Always wear closed toe
shoes (lace-up with rubber soles) and keep shoelaces tied and out
of the way of the wheels. Never ride barefooted or in sandals.