Razor HOVERTRAX 2.0 User manual

15-1291-14
1
1-8
2 3
HOVERTRAX™ 2.0
HOVERTRAX DLX™ 2.0
www.razor.com
EN Read and understand this guide before using product.
FR Lire et assimiler ce manuel avant d’utiliser le produit.
ES Es imprescindible leer y comprender esta guía antes de usar el producto.
DE Lesen Sie diesen Leitfaden vor Benutzung des Produktes aufmerksam.
IT Leggere e comprendere tutti i punti del presente manuale prima di utilizzare questo prodotto.
NL Lees deze instructies goed door voordat je het product gaat gebruiken.
PT Leia e compreenda este guia antes de utilizar o produto.
PL Przed użyciem produktu należy przeczytać ze zrozumieniem niniejszą instrukcję.
HU A termék használata előtt olvasd el és értsd meg ezt a használati útmutatót.
RU Необходимо прочесть и понять эту инструкцию перед использованием продукции.
SV Läs och förstå denna bruksanvisning innan du använder produkten.
NO Les og forstå denne veiledningen før du bruker dette produktet.
DA Læs og forstå hele denne vejledning før du lader nogen bruge produktet.
FI Lue nämä ohjeet huolellisesti ennen tuotteen käyttöönottoa.
RO Consultaţi acest ghid înainte de a utiliza produsul.
SK Pre používaním tohto výrobku si prečítajte a pochopte tento návod.
CS Před použitím tohoto výrobku si řádně prostudujte návod k použití.
BG Прочетете и разберете това ръководство преди да използвате продукта.
TR Ürünü kullanmadan önce kılavuzu okuyup anlayınız.
UK Необхідно прочитати й зрозуміти цю інструкцію перед використанням продукції.
JA 製品をご使用になる前に本説明書をお読みになりよく理解なさってください。
KO 제품을 사용하시기 전에 이 안내서를 읽고 이해하십시오.
ZH 請在使用產品之前細心閱讀和瞭解此使用指南。
ZH 使用产品前请阅读并理解本指南。

1
1-8
2 3

1
1-8
2 3
1

6
8
4 5
7
HOURS
HEURES
MINUTES
2

3

GO
ALLER
EN Training mode HU Gyakorlási üzemmód CS Režim tréninku
FR Mode d’apprentissage RU Режим обучения BG Режим на обучение
ES Modo entrenamiento SV Övningsläge TR Eğitim modu
DE Übungsbetrieb NO Øvelsesmodus UK Режим навчання
IT Modalità esercitazione DA Træningstilstand KO 연습 모드
NL Trainingsmodus FI Harjoitus-tila ZH 訓練模式
PT Modo de treino RO Modul instruire ZH 训练模式
PL Tryb szkolenia SK Výcvikový režim
4

GO
ALLER
EN Normal mode HU Normál üzemmód CS Normální režim
FR Mode normal RU Обычный режим BG Нормален режим
ES Modo normal SV Normalt läge TR Normal mod
DE Normalbetrieb NO Normal modus UK Звичайний режим
IT Modalità normale DA Normal tilstand KO 정상 모드
NL Gangbare modus FI Normaalitila ZH 標準模式
PT Modo normal RO Modul normal ZH 正常模式
PL Tryb normalny SK Štandardný režim
5

1 2
3
2X
HOURS
HEURES
MINUTES SECONDS
SECONDES
EN Changing the mode HU Az üzemmód megváltoztatása CS Změna režimu
FR Changement de mode RU Изменение режима BG Промяна на режима
ES Cambio de modo SV Ändra läge TR Modun değiştirilmesi
DE Betriebsart ändern NO Endre modus UK Перехід між режимами
IT Cambio modalità DA Ændring af tilstand KO 모드 변경
NL Een andere modus kiezen FI Tilan vaihtaminen ZH 變更模式
PT Alteração do modo RO Schimbarea modului ZH 更改模式
PL Zmiana trybu SK Režim nabíjania
6

4 5
2
1
EN Changing the mode HU Az üzemmód megváltoztatása CS Změna režimu
FR Changement de mode RU Изменение режима BG Промяна на режима
ES Cambio de modo SV Ändra läge TR Modun değiştirilmesi
DE Betriebsart ändern NO Endre modus UK Перехід між режимами
IT Cambio modalità DA Ændring af tilstand KO 모드 변경
NL Een andere modus kiezen FI Tilan vaihtaminen ZH 變更模式
PT Alteração do modo RO Schimbarea modului ZH 更改模式
PL Zmiana trybu SK Režim nabíjania
7

3
2X
4
5
HOURS
HEURES
MINUTES SECONDS
SECONDES
8

2
1
EN How to ride the Hovertrax HU Hogyan vezesd a Hovertrax? CS Jak jezdit na čtyřkolce Hovertrax
FR Comment conduire le Hovertrax RU Как кататься на Hovertrax BG Как да се кара Hovertrax
ES Cómo conducir el Hovertrax SV Hur man kör med ett Hovertrax TR Hovertrax’a nasıl binilir
DE So fährt man das Hovertrax NO Hvordan Hovertrax skal kjøres UK Як кататися на Hovertrax
IT Come guidare il Hovertrax DA Sådan kører du Hovertrax KO Hovertrax 의 사용법
NL Hoe er op de Hovertrax kan worden gereden. FI Miten Hovertrax voi ajaa ZH 如何使用 Hovertrax
PT Como andar com a Hovertrax RO Cum să utilizaţi produsul Hovertrax ZH 怎样骑乘 Hovertrax
PL Jak jeździć produktem Hovertrax SK Ako jazdiť na štvorkolke Hovertrax
9

3 4
GO
ALLER
10

11

21
12

1
32
3 4
21
EN Battery Pack Replacement HU Az akkumulátor cseréje CS Výměna baterie
FR Battery Pack Replacement RU Замена блока аккумуляторов BG Смяна на батерия
ES Reemplazo de la batería SV Byte av batteripaket TR PilTakımı Değiştirme
DE Austausch des Akkupacks NO Bytte av batteripakke UK Заміна блока акумуляторів
IT Sostituzione batterie DA Udskiftning af batteripakke KO 배터리 팩 교체
NL Batterijpakket vervangen FI Akkupakkauksen vaihtaminen ZH 更換電池組
PT Substituição da bateria RO Înlocuirea setului de baterii ZH 电池组更换
PL Wymiana zestawu baterii SK Výmena batérie
13

4 5
6 7
8 9
14

15
EN
A NEW TECHNOLOGY, WITH NEW CONCEPTS FOR CONTROL AND SAFETY
As is obvious the first time you see it, the Razor Hovertrax 2.0 is different from things you may have ridden before. No handlebars. No front or
rear wheel. No brake. It is new and it moves, which means if you are interested in riding it you should be interested in learning how to do that
properly – and if you are interested in minimizing the risk of falling off or being injured, you should be very interested in focusing on how to
ride this new product as safely as possible. Helping you do that is the goal of this Manual and other warnings.THIS PRODUCT IS NEW, IT IS
DIFFERENT, BUT IT MOVES AND YOU MUST UNDERSTAND AND FOLLOW THE INSTRUCTIONS IN ORDER TO MAXIMIZEYOUR FUN AND
MINIMIZE RISKS OF INJURY PRESENTED BY RIDING THIS NEW MOVING PRODUCT.
MOVEMENT OF THE RAZOR HOVERTRAX 2.0 IS CONTROLLED BYTHE ANGLE OF THE FOOT PLATFORMS, WHICH IS DETERMINED BY
PRESSURE APPLIED BYTHE RIDER’S FEET ONTHE PLATFORMS.
Different? Well, yes, the Hovertrax 2.0 is“different.” It is an electrically motorized, computerized, gyroscopically-balance-assisted, independently
articulated, dual-platform two-wheeled personal mobility system. If that sounds unlike any bicycle, scooter, RipStik, roller skate or water ski you
have ever used, you’re on the right track.
However, the Razor Hovertrax 2.0 does not operate “magically”, and it does not fly, float or disappear. Its movements are not controlled
remotely, or by the rider’s brainwaves or earnest good wishes, and it has neither a steering wheel, nor a brake, nor external stabilizers of any
kind. Yet it can go, stop, turn and back up – and all of this is controlled solely by the rider’s feet moving at angles relative to the ground. THIS
IS CRUCIAL TO RECOGNIZE ANDTO REMEMBER AT ALL TIMES. The angle of your feet – forward, level or rearward – on each foot
platform is how Hovertrax 2.0 receives, processes and executes instructions from the rider. This will affect the operation of the Razor
Hovertrax 2.0 far more than leaning or“shifting body weight”alone.
WARNING: Read this manual – including both“Safety Warnings”and“How to Operate”and learn to ride safely!
WARNING: Riding any electric product can be a hazardous
activity. Certain conditions may cause the equipment to fail without
fault of the manufacturer. Like other electric ride-on products, the
Razor Hovertrax 2.0 can and is intended to move, and it is therefore
possible to lose control, fall off and/or get into dangerous situations
that no amount of care, instruction or expertise can eliminate. If such
things occur you can be seriously injured or die, even when using
safety equipment and other precautions. RIDE AT YOUR OWN RISK
AND USE COMMON SENSE.
WARNING: Failure to read and understand“How to Operate”
section of this manual increases risk of injury due to falls or other
incidents.
WARNING: NOT FOR RIDERS UNDER AGE 8 OR HEAVIER THAN
100 KG (220 LB). DO NOT EXCEED THEWEIGHT LIMIT OF 100 kg
(220 lb) – including backpacks and other items that might be carried.
Exceeding the weight limit could injure the rider and damage the
Razor Hovertrax 2.0. Rider weight alone also does not necessarily
mean a person’s size is appropriate to fit or maintain control of the
Razor Hovertrax 2.0. Keep this product away from small children and
remember that this product is intended for use only by persons who
are, at a minimum, completely comfortable and competent while
operating the product.
Razor recommends that children under the age of 8 not be permitted
to use this product. This recommendation is based not just on age or
weight or height – it reflects consideration of expected maturity and
skills as well as physical size. The recommended rider age of 8 years
or older is only an estimate and can be affected by the rider’s size,
weight, or skills – not every rider 8 years old or older will be suited to
the product. Certainly, any rider unable to fit comfortably on the Razor
Hovertrax 2.0 should not attempt to ride it, but a parent’s decision
to allow his or her child to ride this product should be based
on the child’s maturity, skill, and ability to follow rules. Razor
emphasizes that adults are strongly advised not to disregard
Razor’s recommendations or permit younger children to ride the
Razor Hovertrax 2.0.
Because products, like the Razor Hovertrax 2.0, can and do present
potential hazards plainly associated with their use, it is well recognized
THE NEED FOR EXERCISE OF PARENTAL RESPONSIBILITY IN SELECTING
RIDING PRODUCTS APPROPRIATE TO THE AGE OF A RIDER, OR
PARENTAL SUPERVISION IN SITUATIONS IN WHICH CHILDREN OF
VARIOUS AGES MAY HAVE ACCESS TO THE SAME RIDING PRODUCTS, IS
IMPORTANT. Not every product is appropriate for every age or size of
rider, and recommendations are intended to reflect the nature of the
hazards and the expected mental or physical ability, or both, of a rider
to cope with the hazards.
Persons with any mental or physical conditions that may make
them susceptible to injury, impair their physical dexterity or mental
capabilities to recognize, understand, and follow safety instructions,
and to be able to understand the hazards inherent in a product’s use,
should not use or be permitted to use products inappropriate for their
abilities. Persons with heart conditions, head, back or neck ailments (or
prior surgeries to these areas of the body), or pregnant women, should
be cautioned not to operate this product.
CHECK AND MAINTAIN RAZOR HOVERTRAX 2.0
WARNING: Always inspect the Razor Hovertrax 2.0 prior to use.
Properly inspecting and maintaining your product can reduce the
risk of injury. Before use, check to confirm that any and all guards
or covers are in place and in serviceable condition. Check that the
parts are functioning properly, that the tires are not damaged or
worn excessively. The Razor Hovertrax 2.0 should be maintained
and repaired in accordance with the manufacturer’s specifications,
using only the manufacturer’s authorized replacement parts, and
should not be modified from the manufacturer’s original design and
configuration. Replace worn or broken parts immediately.
Always check the battery charge before using the Razor Hovertrax 2.0.
Do not ride the Razor Hovertrax 2.0 when its battery is low, as
indicated by a solid red indicator light or unintended shaking of the
wheels during operation. The Razor Hovertrax 2.0 may stop operating
and cause you to fall. Use only Razor Hovertrax 2.0 charger.
SAFETY WARNINGS
WARNING: Whenever you ride the Hovertrax 2.0 you risk serious injury or death from collisions, falls or loss of control. To ride safely, YOU
MUST READ AND FOLLOWTHE INSTRUCTIONS AND WARNINGS IN THIS MANUAL.

16
EN
NOTICE: This manual contains many warnings and cautions concerning the consequences of failing to maintain, inspect or properly use your
Razor Hovertrax 2.0 product. Because any incident can result in serious injury or even death, we do not repeat the warning of possible serious
injury or death each time such a possibility is mentioned.
WARNING: Check local laws and regulations to see where and
how you may use your Razor Hovertrax 2.0 legally. Follow all appli-
cable laws for vehicles and pedestrians.
SAFETY GUIDELINES FOR CONTINUED USE:
An important message to all users
Periodically review this information and make sure that you
understand all warnings, cautions, instructions and safety topics.
Do not let others ride the Razor Hovertrax 2.0 until they have read
this manual. Any type of wheeled activity can be hazardous. Wheels
can, and are intended to move and it is therefore possible to get
into dangerous situations and/or lose control and/or fall off. In such
situations serious injury or death could occur.
Always be aware of the activity around you. Use the Razor
Hovertrax 2.0 in areas free from fixed or moving hazards. Watch your
surroundings for pedestrians, animals and riders of other wheeled
devices.
WARNING: Only use the Razor Hovertrax 2.0 indoors or on
completely smooth surfaces. Avoid obstacles and slippery surfaces,
which could result in a loss of balance or traction and cause a fall. See
the section on Terrain for more guidelines.
WARNING: Do not lift the Razor Hovertrax 2.0 off the ground
when the product is turned on. Do not turn on the Razor Hovertrax 2.0
in mid-air. This will cause the wheels to spin freely which could result
in injury to yourself or damage to things around you.
Ride defensively. Watch out for potential obstacles that could catch
your wheel(s) or force you to swerve suddenly or lose control. Be
careful to avoid pedestrians, skaters, skateboards, scooters, bikes,
children or animals who may enter your path, and respect the rights
and property of others.
Never carry passengers or allow more than one person at a time to
ride the electric product.
Never use headphones or a cell phone when riding. Never hitch a ride
with another product.
Do not ride the Razor Hovertrax 2.0 in wet or icy weather and never
immerse this electric product in water, as the electrical and drive
components could get damaged by water or possibly create other
unsafe conditions.
Wet, slick, bumpy, uneven or rough surfaces may increase risks. Do not
ride this electric product in mud, ice, puddles or water. Avoid excessive
speeds that can be associated with downhill rides. Never use near
steps or swimming pools.
Do not ride at night or when visibility is limited.
Be careful and know your limitations. Risk of injury increases as
the degree of riding difficulty increases. The rider assumes all risk
associated with aggressive riding activities.
WARNING: Never operate any moving product, including the
Razor Hovertrax 2.0, while under the influence of drugs or alcohol.
PROPER RIDING ATTIRE
Always wear proper protective equipment, such as an approved
safety helmet (with chin strap securely buckled). A helmet may be
legally required by local law or regulation in your area. Elbow pads,
kneepads, wrist guards, a long-sleeved shirt, long pants and gloves are
recommended. Always wear athletic shoes (lace-up shoes with rubber
soles) and keep shoelaces tied and out of the way of the wheels,
motor and drive system. Never ride barefooted or in sandals.
USING THE CHARGER
The charger supplied with the electric product should be regularly
examined for damage to the cord, plug, enclosure and other parts. In
the event of such damage, the product must not be charged until the
charger has been repaired or replaced.
Use only with the recommended charger.
Use caution when charging.
The charger is not a toy. Charger should be operated by an adult.
Do not operate charger near flammable materials.
Unplug charger and disconnect from product when not in use.
Always disconnect from the charger prior to wiping down and
cleaning your product with damp cloth.
Do not allow charger or battery pack to overheat. If they seem warm,
allow to cool down. Charge only at room temperature.
Do not place product or charger in the sun or warm environment.
Keep at normal room temperature.
Keep Hovertrax away from flammable materials while charging.
FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS INCREASES RISK OF SERIOUS INJURY.
USE WITH APPROPRIATE CAUTION AND SERIOUS ATTENTIONTO SAFE OPERATION.

17
HOW TO OPERATE
• Use only Razor Hovertrax 2.0 charger.
• Use only Razor Hovertrax 2.0 replacement battery packs. Replacement item #W15155005003.
Model
Voltage
(Nominal)
Vdc
Capacity
(Nominal)
Ah
Charge
Temperature
Range
Operating Temperature
Range
Hovertrax 2.0 36 2.5 0˚ to 40˚C
32˚ to 104˚F
-10˚ to 40˚C
14˚ to 104˚F
HOW IT WORKS
The Hovertrax 2.0 responds to the rider’s foot movements. Remember this. The Hovertrax 2.0 moves due to
fore and aft foot platform tilt caused by the rider’s foot (or feet).
Movement, speed, and stopping are controlled by the degree to which the rider’s feet cause the foot
platforms of the Hovertrax 2.0 to no longer be parallel to the ground.
When the product is“on”, the gyroscopic mechanized balancing feature of the Hovertrax 2.0 tries to keep the
foot platforms of the product parallel to the ground. In use, Hovertrax 2.0 then detects changes from“level”
which are caused by fore and aft pressure on the foot platform(s) applied by the rider’s feet. Such changes
are interpreted by the Hovertrax 2.0 as instructions to make the wheels move. Hovertrax 2.0 tries to re-level a
forward tilt by accelerating, and tries to level a rearward tilt by decelerating.
Note: Do not lift the
Hovertrax 2.0 off the ground
when it is turned on. Do not
turn on the Hovertrax 2.0 in
mid-air.
Moving and Changing Direction:
When a rider stands on the Hovertrax 2.0 with an evenly weighted foot that is“level”on either foot platform:
• Pressing toes on both feet downward moves Hovertrax 2.0 forward.
• Pressing heels on both feet downward moves Hovertrax 2.0 backward.
• Turns are done by putting more downward pressure on the front side of the foot platform on the
outside of the turn.
• A rider can spin in place by pushing downward on the front edge of one foot platform while
simultaneously pushing downward on the rear edge of the other foot platform.
Accelerating and Stopping:
• To go faster or to slow down, press the foot platforms at a greater angle for“more”and reduce the
angles for“less”.
• When slowing or stopping, if you continue to apply force to the edges opposite the direction of
travel, you may not only stop but continue on to reverse your direction.
How does this happen? The fundamental principle is that the Hovertrax 2.0 is designed to be “at rest”when
the foot platforms are level – and the gyroscopic mechanized balancing feature detects the“levelness”of the
product. This same feature detects foot movements that cause a foot platform to no longer be“level”and it
interprets these changes as orders to move.
That’s it. That’s how it works. It does what your feet tell it to do, and the product“self-balances”itself in order
to be ready to detect and implement the instructions provided by a rider’s feet.
Understanding this principle is important for obvious reasons. It also suggests some obvious warnings for
riding the Hovertrax 2.0, such as:
Do not jump up and down on it: If you remove a foot (or both feet), if you then land back on the
Hovertrax 2.0 and cause the foot platform(s) to change position relative to“level” in any degree, the machine
could and will react by moving immediately in response to an“instruction”, which can result in loss of rider
stability, balance or control.
Shifting Weight Alone is not the Issue: Do not presume that shifting weight alone controls motion – or,
for that matter, that not shifting weight equals “stability”. Shifting of rider weight may be associated with
increase or decrease of foot pressures on the foot platforms, but it is the action of the feet on the foot
platforms which instructs Hovertrax 2.0 to move. Conversely, if you were to shift your weight without altering
the placement or angle of your feet, so that the foot platforms remain level, the Hovertrax 2.0 does not
receive any“signal”to interpret.
Riding Tip: Certainly the rider
may“lean”on the Hovertrax 2.0,
but leaning only affects the
foot platform’s position to the
extent the rider’s feet change
their position. If the rider’s
ankles are held at a consistent
90° angle, leaning will result
in tilting. Note that leaning
can exaggerate shifting of
weight, which may affect the
ability of a rider to recover to a
level posture – increasing the
possibility of loss of balance.
Periodic recalibration is recommended:
The Hovertrax 2.0 self-balancing features are calibrated to function with a detected“resting position” that
is level. Over time and usage, recalibration may be needed to assure“level” status. If inaccurate calibration
persists, this could affect the operation of the product by sending instructions to the motor(s) to move that
may differ from the intended motion.
To calibrate the product:
• Turn power OFF.
• Manually adjust the platforms so they are parallel to the ground.
• Turn power ON and HOLD until it beeps and lights flash (approximately 15-20 seconds).
• Turn power back OFF.
• Calibration complete.
Once the product has been calibrated, no matter what position (angle) the platforms are in when it is
turned OFF, the platforms with automatically self-balance themselves back to the calibrated position
when turned ON.
EN

18
HOW TO GET ON
Once you have charged the battery:
1. Power On: Set the Hovertrax 2.0 on the ground and turn the power on and the blue light on the
power button will light-up. The battery/power mode indicator will show either one or two green lights
to indicate mode. Do NOT proceed to step two until all lights on the indicator light up.
2. First Foot: While standing behind the Hovertrax 2.0, put one foot on a foot platform, closer to the
wheel than to the center. Use that foot to activate the foot platform by bringing that foot platform to
a balanced, level position.
3. Confirm Activation: Confirm the first foot platform is activated. Move your foot back and forth and
feel the response from the product. Play with this single foot platform until you are comfortable
keeping the foot platform motion minimal.
4. Step Up: With the first foot platform stable and still, step up on the second foot platform with your
second foot. Do this away from furniture and other large objects. Don’t use a fixed object to brace
or lift yourself – Keep your weight evenly distributed between the two foot platforms. If you are
uncomfortable; step back off and repeat from step 2.Try to stand on the Hovertrax 2.0 without moving.
HOW TO RIDE:
5. Stand in Place: Hovertrax 2.0 is unique among two-wheeled items in that the active stabilization it
provides allows you to stand in place. A scooter or bicycle may balance more easily when it moves,
but a Hovertrax 2.0 can balance even while stationary.
6. Move Forward: To move forward, press down gradually with your feet on the fronts of both foot
platforms. Do not lunge forward or lean excessively, as you may lose your balance.
7. Slow Down: To slow down or stop, apply pressure to the rear edges of the foot platforms by pushing
down with your heels. Leaning back somewhat may be useful but remember your feet are giving
the instructions! If you continue pushing the rear edges with your heels, you will be able to travel
backwards.
8. Turn: To turn left, slightly push your right foot down on the front of the right foot platform; to turn
right, push down on the front of the left foot platform.This idea is to make one wheel turn a little bit
faster than the other wheel.
9. Rotate in Place: To rotate in place, push down on the front of one foot platform while pushing down
with equal force on the rear of the other foot platform.
Riding Tip: Before your very
first ride, expect to spend
up to ten minutes in this
stage of learning how to
stand comfortably on the
Hovertrax 2.0.
Self-balancing Function:
If product is not level when
powered on it will slowly rotate
until it is level. Always wait to
mount until it has completely
stopped self-leveling and all
lights on the battery/power
mode indicator are lit.
Riding Tip: Your practice on
Hovertrax 2.0 should be to keep
the platform in place and get
a feel for the motions that are
generated from small changes
in your fore/aft foot pressure.
EN
HOVERTRAX SPEED CONTROL
Not too fast: The recommended top speed of the Hovertrax 2.0 is approximately nine (9) km/h (6 mph)
and eleven (11) km/h (7 mph) for the Hovertrax DLX 2.0. Speed may be affected by rider weight, surface
conditions, battery charge, etc.The Hovertrax 2.0 is capable of exceeding the normal operating speed for
short periods, which is designed to permit the wheels to react and“re-balance”the product by helping level
itself. Do not attempt to“force”the Hovertrax into continuous operation at“re-balance”speeds, as control will
be more difficult and falls more likely.
HOW TO GET OFF:
1. Slow down and stop
2. Step to the back
3. Power down
Riding Tip: Hovertrax 2.0 is
best ridden at speeds similar to
a brisk walk, not faster.
NOTE: If Hovertrax 2.0 is left on for more than 5 minutes, it will automatically turn off and beep.
PRODUCT WARNING SIGNALS
The Hovertrax 2.0 has several built in protection features, which include:
• Self-leveling function: If the product is not level when powered on it will slowly rotate until it is
level. Always wait to mount until it has completely stopped self-leveling and all lights on the battery
power mode indicator are lit.
• Training Mode: This product can be set to training mode to operate at a slower speed. Do not
operate in normal mode until you are completely comfortable riding in training mode.
• Low or charging battery: The battery/power mode indicator light will indicate insufficient charge
for operation by flashing and the product will beep.
• Excessive angle shutoff: At excessively steep foot platform angles, the product will stop
powered operation.
Note: All lights flashing notes a
leveling error. Do not ride until
flashing stops.