Razor Rift User manual

Rift™Caster Scooter
US_130801
OWNER’S MANUAL
Read and understand this entire manual before riding!
DO NOT RETURN TO STORE!
NOTE: Manual illustrations are for demonstration purposes only.
Illustrations may not reflect exact appearance of actual product.
Specifications subject to change without notice.
Please have your 21 character product I.D. code ready before
contacting Razor for warranty assistance and/or replacement parts.
Product I.D. Code: _____________ - ____________ - ____________

1
CONTENTS
SAFETY WARNINGS
AN IMPORTANT MESSAGE TO PARENTS: This manual contains
important information. For your child’s safety, it is your responsibility to
review this information with your child and make sure that your child
understands all warnings, cautions, instructions and safety topics. Razor USA
recommends that you periodically review and reinforce the information in this
manual with younger riders and that you are required to inspect and maintain
your child’s caster scooter to insure their safety.
WARNING: Caster scooter riding can be a hazardous activity. Caster
scooters can and are intended to move and it is therefore possible to get
into dangerous situations and/or lose control and/or fall. If such things occur
you can be seriously injured or die. LIKE ANY OTHER MOVING PRODUCT,
USING A CASTER SCOOTER CAN BE A DANGEROUS ACTIVITY AND MAY
RESULT IN INJURY OR DEATH EVEN WHEN USED WITH PROPER SAFETY
PRECAUTIONS. USE AT YOUR OWN RISK AND USE COMMON SENSE.
• Always wear safety equipment, such as a helmet, knee pads and elbow
pads. Always wear a helmet when riding your caster scooter and keep the
chinstrap securely buckled.
• The skill required to ride this product may be greater than that required to
ride a traditional kick scooter.
• Do not allow children under age eight (8) to use the caster scooter. All
children and preteens should ride with adult supervision at all times.
• Rider weight does not necessarily mean a child’s size is appropriate to fit
or maintain control of the caster scooter.
• A parent’s decision to allow his or her child to ride this product should be
based on the child’s maturity, skill and ability to follow rules.
• Always wear closed toe shoes.
• Ride on smooth, paved surfaces away from motor vehicles.
• Avoid sharp bumps, drainage grates and sudden surface changes. Caster
scooter may suddenly stop.
• Avoid streets and surfaces with water, sand, gravel, dirt, leaves and other
debris. Wet weather impairs traction and visibility.
• Do not ride at night.
• Avoid excessive speed associated with downhill rides.
• Obey all local traffic and scootering laws and regulations.
• Watch out for pedestrians.
• Do not exceed 143 lb (65 kg) total weight on the caster scooter.
• Adult assembly required.
ACCEPTABLE RIDING PRACTICES AND CONDITIONS
Direct parental supervision is required. Caster scooters are meant to be used
only in controlled environments, free of potential traffic hazards, and not
on public streets. Do not allow your child to ride the caster scooter in any
areas where vehicle traffic is present. The child must maintain a hold on the
handlebars at all times. Never allow more than one child at a time to ride
a caster scooter. Never use near steps, sloped driveways, hills, roadways,
alleys or swimming pool areas.
Do not ride a caster scooter in wet weather. Caster scooters are intended for
use on solid, flat, clean and dry surfaces, such as pavement or level ground,
without loose debris, such as rocks or gravel. Wet, slick or uneven and rough
surfaces may impair traction and contribute to possible accidents. Do not ride
a caster scooter in mud, ice, puddles or water. Avoid excessive speeds that
can be associated with downhill rides. Never risk damaging surfaces, such as
carpet or flooring, by use of a caster scooter indoors. Do not ride at night or
when visibility is impaired.
PROPER RIDING ATTIRE
Always ensure child is wearing proper protective equipment, such as an
approved safety helmet. A helmet may be legally required by local law
or regulation in your area. A child should always wear shoes, never ride
barefooted or in sandals and should keep shoelaces tied and out of the way
of the wheels.
FAILURE TO USE COMMON SENSE AND HEED THE ABOVE
WARNINGS FURTHER INCREASES RISK OF SERIOUS INJURY. USE
AT YOUR OWN RISK AND WITH APPROPRIATE AND SERIOUS
ATTENTION TO SAFE OPERATION. USE CAUTION.
WARNING: ALWAYS INSPECT THE CASTER SCOOTER PRIOR TO
RIDING. Properly inspecting and maintaining your caster scooter can reduce
the risk of injury. Always inspect your caster scooter before riding and
regularly maintain it.
WARNING: CHECK LOCAL LAWS REGARDING CASTER SCOOTER
USE. Check local laws and regulations to see where and how you may use
your Razor caster scooter legally. In many states and local areas, caster
scooter riders are required BY LAW to wear a helmet. Check local laws
and regulations regarding laws governing helmet use and caster scooter
operation in your area.
Safety Warnings .............................................................................................. 1
Before You Begin.............................................................................................. 2
Set Up and Usage Instructions ........................................................................ 3
Check Before Riding......................................................................................... 4
Caster Scooter Parts List ................................................................................. 5
Safety Reminders............................................................................................. 7
Warranty .......................................................................................................... 7

Handlebars
T-bar
Collar clamp
Front fork
Deck
Caster
Barcode Location
2
Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers
at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the
product I.D. code (located on the bottom of the frame) available for better assistance.
BEFORE YOU BEGIN
Remove contents from box. Remove the separators that protect the components from damage during shipping. Inspect
the contents of the box for scratches in the paint and dents that may have occurred during shipping. Because your
caster scooter was partially assembled and packed at the factory, there should not be any problems, even if the box
has a few scars or dents.
WARNING: DO NOT USE
NON-RAZOR PRODUCTS WITH
YOUR CASTER SCOOTER.
The Razor Rift™ caster scooter
has been built to certain Razor
design specifications. The original
equipment supplied at the time of
sale was selected on the basis of
its compatibility with the frame,
fork and all other parts. Certain
aftermarket products may not be
compatible. Use of any non-Razor
parts will void your warranty.
q Required Tools
5mm Allen wrench
(included)
PRODUCT I.D. CODE
1. Bottom of Frame
2. UPC Side of Box (not shown)

3
SET UP AND USAGE INSTRUCTIONS
qInstalling the T-bar
Required Tools: 5 mm Allen wrench
2With the front wheel
pointed straight ahead and the
handlebars square to the front
wheel, tighten the clamp as
shown. Tighten securely.
1Using a 5 mm Allen wrench,
loosen the collar clamp and
slide it upward. With a clock-
wise twisting motion, push and
“thread” the T-bar onto the fork
until it bottoms out on the fork
headset lock nut.
WARNING: Failure to
properly install and tighten the
collar clamp may cause the rider
to lose control and fall. If you do
not understand these instructions,
please contact Razor Customer Care
for assistance.

4
Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers
at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the
product I.D. code (located on the bottom of the frame) available for better assistance.
CHECK BEFORE RIDING
Using the 5mm Allen wrench, check that the collar clamp bolt is tightened securely.
Note: If the handlebars are not properly aligned with the front wheel, loosen the bolt on the collar clamp and position
the front wheel until it is perpendicular with the steering tube; retighten bolt on collar clamp to lock in place.
qCollar Clamp
q Wheels and Bearings
Under normal circumstances and conditions, Razor wheels and wheel bearings are maintenance free. Nonetheless, it
is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for proper
tightness, and the bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops play, this
is an indication of excess wear and replacement is necessary. Replace immediately with only genuine Razor wheels.
Worn wheels and bearings are considered normal wear-and-tear and are not covered by the Razor Warranty. Wheels
other than genuine Razor wheels may not be compatible with your Rift™ caster scooter. The use of anything other than
genuine Razor replacement parts may affect your safety and will void your warranty.
q CleaningYour Caster Scooter
Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents, as they may damage the
surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners, as they may damage or dissolve the plastic
components or soften the decals or decal adhesive.
q How to Ride
Place both hands firmly on the handlebars and hold the caster scooter in the upright position. Place one foot securely
on the deck and the other foot on the ground for stability. When you are ready, carefully push off to begin the rolling
action. Once in motion, the caster scooter can be ridden like any other kick scooter and because of its unique design,
you can gain and maintain speed by swinging the back end in a back and forth “fishtail” motion. The caster scooter
also allows you to carve/drift turns by adjusting the angle of your body from side to side. To learn all the different ways
you can maneuver the caster scooter, Razor recommends you practice in a safe area free from obstructions before
riding around others.
WARNING: Wheelies and
other stunt-type riding reduces your
ability to maneuver and control your
caster scooter. Take the necessary
precautions, such as wearing
appropriate protective gear, and
practice in an area free from
obstructions.

1
2
3
4
5
5-1
6
7
10
6
8
9
5
CASTER SCOOTER PARTS LIST
Keep your caster scooter working for years with genuine Razor parts. Visit our web site or e-mail us for more information on spare part availability.
(Specifications subject to change without notice.)
1. Handlebar Grips
2. T-Bar
3. Collar Clamp
4. Headset Bearings (upper/lower)
5. Front Fork
5-1. Fork Protector
6. Axle Bolts (front/rear)
7. Front Wheel
8. Deck
9. Rear Caster
10. Rear Wheel

7
SAFETY REMINDERS
Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers
at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the
product I.D. code (located on the bottom of the frame) available for better assistance.
Razor Limited Warranty
The manufacturer warranties this product to be free of manufacturing defects
for a period of 6 months from date of purchase. This Limited Warranty does
not cover normal wear and tear of wheels and bearings or any damage,
failure or loss caused by improper maintenance or storage.
This Limited Warranty will be void if the product is ever:
• used in a manner other than for recreation;
• modified in any way;
• rented.
The manufacturer is not liable for incidental or consequential loss or damage
due directly or indirectly to the use of this product.
Razor does not offer an extended warranty. If you have purchased an
extended warranty, it must be honored by the store at which it was
purchased.
WARRANTY
Printed in China for:
Razor USA LLC
P.O. Box 3610
Cerritos, CA 90703
Copyright © 2003-2013 Razor USA LLC. All rights reserved. RAZOR and the Razor Logo
Design are among the registered trademarks of Razor USA LLC in the United States and/or
select foreign countries. Rift is a trademark of Razor USA.
For your records, save your original sales receipt with this manual and write
the serial number below.
__________________________________________
Loose Parts
Check and secure all fasteners before every ride. Make sure the
collar clamp is locked properly in place before riding.
Replacement Parts
For a complete selection of parts, visit our website at
www.razor.com.
Safety Gear
Always wear proper protective equipment, such as an approved
safety helmet. Elbow pads and kneepads are recommended.
Always wear shoes (lace-up shoes with rubber soles), never ride
barefooted or in sandals, and keep shoelaces tied and out of the
way of the wheels.
q
q
qBe Careful!
You will see people on TV and maybe even people you know doing
tricks and stunts. These are people who have been practicing on
scooters for a very long time. Don’t try something until you are
ready. Avoid steep inclines and don’t ride too fast — you can lose
control and fall. Skateboard parks are not designed for caster
scooters. Never ride in traffic or on the street, and watch your
surroundings for pedestrians, bikers, boarders, scooter riders and
skaters.
Maintain a hold on the handlebars at all times.
PRE-RIDE CHECKLIST
US_130801
DO NOT RETURN TO STORE
Failure to follow these instructions may damage
your caster scooter and void your warranty.
q