RC4WD BEAST II User manual

1
All manuals and user guides at all-guides.com
all-guides.com

All manuals and user guides at all-guides.com

i
Recommended Tools
Modelling / Craft knife
Hex drivers/(2.5mm、2mm、1.5mm)
Side cutters Styrene Glue
Cross Wrench
Tips for Assembly
It is recommended that that body parts are painted with Acrylic Lacquer, or Enamel.
Test fit parts before applying glue and use glue sparingly.
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Do not use instant adhesive.
Thread Lock
Cross head screwdriver (small)
Long Nose Pliers
All manuals and user guides at all-guides.com

ii
RC4WD Limited Warranty
All RC4WD products are warranted to be free of defects in materials and workmanship when new.
Our limited warranty does not cover damages due to normal wear and tear, user error of assembly or
installation, user modifications, user's failure to perform routine maintenance, addition of aftermarket
parts or option parts. This warranty lasts 30 days after arrival for original purchaser. In the event of a
defect under this warranty, RC4WD will, at our discretion, replace the product, provided our inspection
indicates that an original defect exists. RC4WD reserves the right to replace any product which is no
longer available with a product of comparable value and function. If RC4WD determines the repair
is not covered under warranty guidelines, we will contact you to discuss your options. If you have any
questions, please contact us via email at [e-mail].
Important Notes-General
This kit only suitable for 16 years of age.
Read carefully and fully understand the instructions before commencing assembly.
When using tools and hand the small parts. Extra care should be taken to avoid personal injury.
Take care when building, as some parts may have sharp edges.
Read and follow instructions supplied with paints and / or cement, if used(not included in kit).
Follow the operating instructions for radio equipment at all times.
Keep the wheels of the model off the ground when checking operation of the radio equipment.
Never disassemble battery or cut battery cables.
Please read the instruction manual before you begin.
All manuals and user guides at all-guides.com

iii
Z-B0105-1
6x6 Body
6x6 Body
Z-B0099-1
Z-B0099-2/(H2)
Z-B0099-3/(55mm)
Z-B0099-4
Z-B0099-5
Z-B0105-5
Z-B0105-2
Z-B0105-3
Z-B0105-6
Z-B0105-4
Z-B0105-7
All manuals and user guides at all-guides.com

iv
6x6 Body
6x6 Body
Z-B0101-1
Z-B0101-2
Z-B0101-3/(H12)
Z-B0103-1
Z-B0103-2
Z-B0103-3
Z-B0103-4
Z-B0103-5
Z-B0103-6
All manuals and user guides at all-guides.com
all-guides.com

v
6x6 Body
6x6 Body
Z-B0095-1
Z-B0095-2
Z-B0095-3
Z-B0097-1
Z-B0097-2
Z-B0097-3/(H15)
Z-B0097-4/(H10)
Z-B0097-5
Z-B0097-6
Z-B0097-7
All manuals and user guides at all-guides.com

vi
6x6 Body
Z-B0091-5/(31mm)
6x6 Body
Z-B0089-2/(H3)
Z-B0089-4/(X5)
Z-B0089-5/(65mm)
Z-B0091-1
Z-B0091-2
Z-B0091-3
Z-B0091-4/(H7)
Z-B0091-6
Z-B0091-7
Z-B0091-8
Z-B0089-1
Z-B0089-3/(H8)
Z-B0089-6
All manuals and user guides at all-guides.com

vii
6x6 Body
Z-B0087-1/(H9)
Z-B0087-2/(H1)
Z-B0087-3/(X4)
Z-B0087-4/(X2)
Z-B0087-5/(X3)
Z-B0087-6/(X1)
Z-B0087-7
(H5)
6x6 Body
Z-B0093-1/(H14)
Z-B0093-2/(H13)
Z-B0093-3/(H11)
Z-B0093-4
Z-B0093-5/(131mm)
Z-B0093-6/(16mm)
Z-B0093-7
Z-B0087-8
(H6)
Z-B0087-9
(H4)
All manuals and user guides at all-guides.com

viii
6x6 Body
Z-B0085-1/(110mm)
Z-B0085-2
Z-B0085-3
Z-B0085-4/(187mm)
Z-B0085-5
6x6 Body
6x6 Body
Z-B0107-1
Z-B0107-2
Z-B0107-3
Z-S1531-1
Z-S1531-2
Z-B0085-6
Z-B0085-7
Z-B0085-8
Z-B0085-9
Z-B0085-10
All manuals and user guides at all-guides.com