RC4WD VV-JD00020 User manual

!
!
1/14 Scale Earth Hauler 797F Hydraulic Mining
Truck
(VV-JD00020)
1. Truck size: Length 1015MM, Width 685MM and Height 560MM.
2. Truck weight: 100KG, Remote control 0.5KG
3. Main materials include Alloy aluminum，metal board，yellow copper，chrome steel and PC
board
4. Minimum ground clearance: 95MM

!
!
5. Capacity: 100KG for scattered materials (such as sands and crushed stones) and the
maximum capacity is 200KG.
6. Power voltage：12V，XT90 connector. We commend an a lipo battery with over 25C 3S
lipo whose size range is 240*130*45MM (length/width/height).
According to test results, a 22000MHA lipo battery can continually work for up to 65
minutes with full load and a 38A lead-acid battery can continually work for up to 35 minutes
with full load.
There are three positions to place the battery. The best option for lipo battery is the left side
of the cab, for the purpose of a more convenient charge. The second position is between
the two chassis. Its space dimension is 175*140*160MM (length/width/height). For a
lead-acid battery, it’s best to choose one with a bigger capacity as long as the size is
eligible. A 38A lead-acid battery was used to run test this truck. The last position is between
the two front wheels. The space dimensions are 270*140*250MM (length/width/height).
7. Maximum speed: 10KM/H
8. Remote control: FS-I6S

!
!
9. Hydraulic oil: #32 Hydraulic Oil, 280ML. Mobile 32 Hydraulic Oil 14oz (Z-X0042).
10. Light system: Needs to purchased separately. 1/14 Scale Earth Hauler 797F
Hydraulic Mining Truck Light System (VVV-S0200).

!
!

!
!
Form 1: Parameter List of QuicRun-WP16BL30
(Parameters in the form below indicate factory defaults)
Programmable Items
Option
1
Option
2
Option3
Option4
Option
5
Option
6
Option
7
Option8
Option9
1.Running Mode
Fwd/Re
v
2.Drag Brk Force
100%
3.Low Voltage Cutoff
3.0VlCe
ll
4.Start Mode
(Punch)
Level5
5.Max. Brk Force
75%
6.Max. Rev Force
100%
7.Initial Brk Force
0%
8.Throttle Range
9%
9.Timing
11.25de
g
Note 1: Fwd=Forward, Rev=Reverse, Brk=Brake
Note 2: When setting the “automatic identification” mode, the battery pack can only be
recognized as 2S, 4S and 6S Lipo. Because each adipose cell’s normal voltage is from 2.6V to
4.2V, it is not easy to have a correct calculation on the voltage of all adipose cells.
Programmable Items List
Programmable Items
Programmable Value
Option
1
Option
2
Option3
Option4
Option
5
Option
6
Option
7
Option
8
Option9
1.Running Mode
Fwd &
Rev
2.Drag Brk Force
100%
3.Low-Voltage Cutoff
3.0V/ce
ll
4.Start Mode
(Punch)
Level5
5 Max. Brk Force
100%
Mineral Truck Servo Specifications:
Working voltage: 12V~24V(DC) (Any voltage between this range is okay)

!
!
No-load rotating current: <500mA
Maximum torque: 180kg.cm(24V) (experimental result, instead of theoretical value)
1764N.cm(24V) (experimental result, instead of theoretical value)
90kg.cm(12V) (experimental result, instead of theoretical value)
882N.cm(12V) (experimental result, instead of theoretical value)
Angel speed: 0.5s/60°(it takes 0.5s to turn 60°), when using 24V.
1.0s/60°(it takes 1.0s to turn 60°), when using 12V.
Rotating angel: The Maximum angel is 300° (any angle among this range can be set up).
Input mode: Pulse signal (remote controller, multi-channel controller, single chip computer)
or analog voltage signal (potentiometer)
Range of pulse signal input: 0.5ms-2.5ms, can fit all multi-channel controllers, 1ms-2ms
model aircraft remote controls, "single-chip programming" and "Arduino" and so on.
Range of voltage signal input: 0V~+5V
Accuracy：0.32°
Weight：530G
Gears’ material：steel
Total s i z e ：95.5mm X 60.5mm X 102.6mm

!
!

!
!
How to pour out oil:

!
!

!
!