RED DEVIL 5400-02 User manual

www.reddevilequipment.com
1-2320-00
5400 & 5410
One-Gallon Shaker
Model 5400-02, -32, -OM, -OH, -H3, -X2, -X3, -EM, -E2, & -E3 (Dual Arm Shaker)
Model 5400-A1 (Air-Driven Dual Arm Shaker)
Model 5410-02, -32, -OM, -OH, -H3, -X2, -X3, -EM, -E2, & -E3 (Single Arm Shaker)
June 2006 Rev. C
Owner’s Manual

Handle
Dip Stick
Clamp Screw
Clamp Jaws
Guide Rods
Machine Mounted on 5151 Pedestal Base
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10
Air Driven Product Information . . . . . . . . . . . . . . . . . . .11
Replacement Parts Lists . . . . . . . . . . . . . . . . . . . . . . . .12-20
Warranty Terms and Conditions . . . . . . . . . . . . . . . . . .21
2

3

4

Electrical Connection and Grounding Requirements
Explosion-Proof Units
Machines need to be wired by a certified electrician and
conform to hazardous location directives for the
machines mixing environment.
Check area around the mixer to be sure that there are not
any potential safety issues, and that the machine will be
mounted on a sturdy, flat surface.
5

Fig. 6: Old Style Control Panel with Timer
Explosion-Proof Motor Machines: Use 6784678 Pushbut-
ton control module to start and stop machine.(see pg. 9)
Air Motor Machines: Supplied with a on/off valve.
11.
For Explosion-Proof Machines, Refer to Page 9.
6

7

8
Troubleshooting

Old Style Explosion Proof Motor
Wiring Diagram for Motors used
PRIOR to March 1, 2006
9

Wiring Diagrams (Continued)
Current Explosion Proof Motor Wiring Diagram
for motors manufactured after March 1st, 2006
Optional Pushbutton
Controller
Kit Number 6784678
(includes 1784679 instruc-
tion sheet and 5784642 PB
Control Station)
10

Air-Driven Product Information
11

Replacement Parts List
12

Right Clamp Assembly
0-5463-00 Standard
0-5465-00 Heavy Duty
Left Clamp Assembly
0-5462-00 Standard
0-5464-00 Heavy Duty
13

14

TIMER CONVERSION KITS-for old style printed circuit
board timer shown on page 6, figure 6.
FROM:Old PCB 110V TO: Current 110VPB timer: 6782845
FROM: Old PCB 220V TO: Current 220V PB timer: 6782861
FROM: Old PCB 110V TO: 1 Hour Mechanical Timer:6780349
15

Old Style XP Motor
Right Clamp Assembly
0-5463-00 Standard
0-5465-00 Heavy Duty
Left Clamp Assembly
0-5462-00 Standard
0-5464-00 Heavy Duty
16

*Includes crankshaft #39, housing #8, oil seals #11,
and related parts.
** Includes crankshaft and housing case assembly
#58, shaft #50, universal #6, housing cover
#5 and related parts.
--- 6-9160-00 Transmission assembly (5400) **
--- 6-9161-00 Transmission assembly (5410) **
*
60 5-7846-15 Motor, Explosion proof
61 9-6820-00 Nipple, Pipe
62 9-7846-16 Junction box, X-Proof
63 9-7846-18 Bracket, Relay Mount
64 5-7846-22 Cube Relay-110V
64 5-7846-23 Cube Relay-220V
65 9-7846-17 Cover, Junction Box
66 9-7605-37 Screw, Truss hd ph #8-32 x 1/2”
67 9-7811-42 Screw, Pan hd ph #10-32 x 1/2”
Obsolete- 3/1/06
Obsolete- 3/1/06
Current Explosion-Proof Motor
220V
17

18

19

20