RED Hydrogen ONE User manual

About your phone
SIM/microSD
card tray Headset jack
USB/Charger port
Microphone
Earpiece/
Speaker
Front
camera
Notification
light
Speaker
Light sensor/
Proximity
sensor
Power/
Lock button
Camera
button
Volume
buttons
Rear
camera
Flash
Microphone
Accessory
smartport
NFC
NOTE: Devices and software are constantly evolving—
images you see here are for reference only.

Setting up your phone
Installing SIM card and microSD card
1. Carefully slide out the tray.
2. Insert the SIM and microSD card into the tray with
gold contacts facing up (as shown).
3. Carefully slide the tray back into place.
Important information
Charging your phone
Please charge the phone fully with original charger and
USB cable before turning it on. Only use the RED Tech
chargers and accessories included along with your phone.
1. Plug the charger into an outlet.
2. Connect the cable to the charger and your phone.
Turning your phone on and off
To turn your phone on, press and hold the Power/Lock
button.
To turn it off, press and hold the Power/Lock button and
follow the instructions.
Nano SIM Card1
Nano SIM Card2
microSD Card
Nano SIM Card
Google, Google Play and other marks are trademarks of Google LLC.
This booklet is made from 100% post-consumer recycled paper.
Copyright © RED Technologies, LLC 2018. All rights reserved.
310-020_4
For information about SAR (Specific Absorption Rate),
safety information, and legal notices, please view the
Important Safety Information & Warranty in the box.
Download a User Guide from www.h4v.com.
NOTE: The microSD card is sold
separately.