Redmond BL019 User manual

PERSONAL BLENDER
Model: BL019
User Manual

Thank you for purchasing this product. To ensure your correct use and trouble-free operation,
please read this manual carefully and keep it properly for future reference.
Specification
Outer appearance and dimension of the product
2.95in（75MM）
8.66in（220MM）/20Oz/600ML
5.11in（130MM）
5.90in（150MM）
2.28in（58MM）
2.87in（73MM）
01

Self-protecting Time
Noise Level
Accessory
≥10 Min
≤75dB
Personal Blender *1
20Oz/600ml Tritan Cups *2
304 Stainless Blades *1
User Manual*1
Main Unit Size
Product Size
5.5 x 5.3 x 16.1 in (140 x 135 x 410 mm)
5.1 x13.3 in (130 x 340 mm)
Main Unit Weight 1.45kg
Cleaning Sponge *1
Portable Cup Lid *2
Silicone Ice Tray *1
Model
Level
BL019
3 levels for speed regulation
Level 1/RPM:17000
Power
Level 2/RPM: 21000
PULSE/RPM: 21000
250W
Input Voltage 120 V / 60 Hz
Operating Time ≤1 Min
Interval ≥2 Min
02

Cup: 2PCS, Tritan
material, BPA Free Cups
Cup lid: 2PCS, portable
cup lid with a handle,
easy to carry.
Mixing blade assembly:
304 food grade stainless
steel, 6-piece blade
assembly.
Button Function :
2 speed levels for regular
mixing, "P" level speed for
high-speed mixing.
Cleaning sponge: High
density cleaning sponge
ensures your light-hearted
cleaning.
Ice tray: Food grade
silicone ice tray.
03

Steps
1.Cut ingredients into small pieces,
add the right amount of liquid
(Max: 20oz/600ml)
2.Install the cup as directed.
3.Choose the appropriate speed to
stir the ingredients fully.
4.Use to-go lids, easy to carry.
04
* : For installing the cup, please refer to the “Details” page.

Details
1.Put the food material and water into the Tritan cup (please cut the food material into about
a size of about 1inch / 2cm, and then add an appropriate amount of water; it is recommended
that the water height be greater than the height of the food material), and the capacity should
not be greater than 20Oz/600ml.
2.Insert the blade base into the Tritan cup, turn it clockwise and lock it.The assembling steps
of the blade base are to install and lock clockwise.
05
Aim at
Rotate
Step 1 Step 2

06
4.After stirring and mixing is completed, please take out the cup body upward
counterclockwise, and put on the dedicated lid to enjoy the drink.
3.Turn the power switch to level 1 or 2 to stir and mix automatically. When any hard object is
encountered, you can turn to level P for high-speed stirring and mixing. Make sure to turn the
power knob to level 0 and turn off the power after the stirring and mixing is completed.

07
Caution
Because different food materials have different stirring methods and time, it is
recommended that the stirring and mixing time be≤1 minute and the interval ≥2 minutes; If
the stirring and mixing time is too long, the automatic protection device of the blender will
be triggered, and you will need to wait for about 5 minutes to start the blender from level 0.
Only water of normal temperature or ice water can be added into this blender for stirring and
mixing. Do not add hot water or add no water for stirring, for this will damage the knife seat or
cause water leakage.
There’s a food-grade leakproof silicone ring in the knife seat and the circular ring in the cup lid.
Make sure that the silicone ring is installed properly before each stirring and mixing. If it falls
off, install it properly before use to avoid water leakage during stirring and mixing.
After stirring and mixing is completed, take out the cup body upward counterclockwise, and
put on the dedicated lid to enjoy the drink.
Quick-frozen food should be thawed before stirring and mixing. Otherwise, it is easy to wear
the blade or get the blade stuck, and the device will not work properly.
Never process boiling liquids (max 130°F/54°C).
Not to blend with less than 1/3 liquid.
Do not exceed the maximum capacity mark of the cup.

Troubleshooting
Peculiar noise, odor or smoke, etc Cut off the power and stop using immediately.
The product cannot work 1.Check if the power supply is properly connected.
2.Check if the switch is turned on.
3.Check if the mixing cup is installed in place.
4.The product enters the over-heat prevention state.
Please turn the speed to lever "0", wait for 10-15
minutes to restart it.
The blade cannot work 1.Please confirm if the blade gets stuck or not.
2.Check if the knife seat is locked clockwise or not.
3.Check if the switch is turned on or not.
If the product cannot work after the above check, please contact us in time, and we will do our
best to serve you.
Cut fruits and vegetables into ¾-inch, 1-inch, otherwise, it will lead to overload and damage
motor.
08

Cleaning and maintenance
1.After the mixing cup finishes working, add water into it, and the cup body and the knife seat
assembly can be cleaned quickly by making use of the working mode of the device. Do not
clean the mixing cup with the dishwasher and dryer.
2.Take off the power plug, and the external part of the main unit can be wiped with dry cloth.
Do not put the main unit into water or other liquids, nor rinse it in the water or other liquids.
Otherwise, electric leakage may occur, or parts may be damaged.
3.For cleaning, please rinse the cup body, knife seat and accessories with water, and wipe
them dry. The blade is very sharp. Take care in cleaning to avoid being injured, and you can
wear protective gloves in cleaning.
4.Do not use steel balls, abrasive cleaners or corrosive liquids (such as gasoline or acetone)
to clean the product.
5.Do not use any diluent or bleach to clean the product. After washing the parts with water,
wipe them thoroughly.
6.If the parts are stained with fruit and vegetable juice, wipe them with a few drops of edible
oil before washing, which can better remove the staining.
7.Do not expose the product, power cord, accessories and packaging to the sun.
09

10
Your satisfaction and support mean everything to us.
To offer you the best shopping experience, we provide a 12-month warranty
for our products.
If you have any issues with our products, please feel free to contact the
seller or E-mail: [email protected]
our customer support team are at your service 7 days/ 24 hours and will
try our best to solve your problem.
We also look forward to receiving any advice from you about our products
or service and we will make efforts to make them better.
THANK YOU FOR PURCHASING OUR PRODUCTS !