RedPort M4 User manual

Edition: V2.0 Date:2012-1-11
RedPort Satellite Optimizer
M4
Quick Start Guide
Package Contents:
¾One M3 Mini 3G Router
¾One USB data Cable
¾One installation Guide
If any of above items are damaged or missing, please contact with your distributor.
Panel Layout

Edition: V2.0 Date:2012-1-11
Name Fuction
Blue The Router is power on
Blue in quickly
flashing transmission data via WiFi
Green LAN/WAN cable is connected but there is no
data being transmitted or received
System LED
Green in quickly
flashing LAN/WAN cable is connected but there is data being transmitted or received
Light off Battery 100% is charged, and support power
to router.
Blue in quickly
flashing Battery with low power ,and need re-charged
Link Status LED
Red Battery is charging
3G Port
The port is used to connect 3G modem.
3G/DHCP Switch
This switch is used to switch operation mode of the Router between 3G and DHCP.
Power
This port is used to connect the provided power adapter.
LAN/WAN
This LAN/WAN port works as WAN in Dynamic IP/Static IP/PPPoE mode and as LAN in
3G mode. As LAN, it connects the Router to the local PC; as WAN, it enables you connect
DSL/cable Modem, or Ethernet.
RESET
With the Router powered on, use a pin to press and hold the RESET button (about 8
seconds) until the LED becomes turn off, and then release the button and wait the
Router reboot to its default settings.

Edition: V2.0 Date:2012-1-11
Quick install M4
Hardware installation
1. powered by USB cable
connect the Router and the computer using a USB cable like below, the Router can
powerd on automatically.
2. Powered by USB adapter
You also can use USB adapter to supply for the Rouer, follow step 1, 2, 3 to connect them.
Notes：The output of the adapter should between 5V 750mAh and 5V, 2A.
Connecting the Router

Plug the power plug in the electrical wall socket. The Router will start to work automatically.
[Windows XP]
Click the "Start/Control Panel", double-click "Network Connections", in the "Wireless
Network Connection" right click and select "View Available Wireless Networks", Highlight
the SSID of Router (here is 3G ROUTER) and cick “Connect” to add to the network. On
the right shows "connected” that indicates successfully connected to the 3G router.
[Winodws 7]
When 3G modem installed, the lower right corner of the computer there is a icon,
click the icon, and will see a pop-up network list, select "3G ROUTER" the wireless
network, and then double-click it to connect, when the screen appears "connected".
Now let’s open the IE Explorer( Iphone for Safari),type the default IP:192.168.100.1 in the
Address bar, then the Username：admin, Password: admin，No bold words，click OK into
the management interface:

Edition: V2.0 Date:2012-1-11
Setting 3G Router
the router support 3G, Static IP, Dynamic IP, PPPoE, click “Basic Settings” on the left side
of WEB page, so you should first choose Router’s operating mode, the default mode is
“3G dialup”.
1. 3G Dial-UP
The default mode for the Router is 3G Dial-up. It already integrates many ISP parameters
over the world, and customers can choose the ones they want accroding to 3G Modems,
there is different parameters in different country.
For the foreigners, if a 3G Modem is not compatible with our Router, we can realize it from
remote online control, to make your 3G modems comply our router.
Return to “Status > Running Status”, check “3G Dialup” says “connected”, if it’s connected,
you should be able to access Internet via 3G. Other cases:
If 3G Dialup says “disconnect”,it means no 3G connection, maybe your 3G Modem is not
attached to the router, you can check the Modem’s VID/PID in 3G Modem(VID/PID), if the
VID/PID is Unrecognized, either the router’s USB port is bad or the 3G Modem is bad.
If “3G Dialup” says “connecting, please wait…”, it means that the router is dialing now,
please wait for a moment, after 20 seconds, refresh the page until “3G Dialup” says
“connected”, if the status “connecting, please wait…” has shown for a long time, please
check as follows:

SouthRiverProducts Ltd www.southriverproducts.com
Edition: V2.0 Date:2012-1-11
1. Check the 3G Router has supported your 3G Modem;
2. Check your 3G Modem can work well when directly connected to your computer.
3. Check your settings are correct.
2. PPPoE
If you have applied ADSL to realize Dial-up service, you should choose this type. Under
this condition, you should fill in both the User Name and Password that the ISP supplied.
Please note that there fields are case-sensitive.
Open the router WEB interface, click on the "Basic Settings> Internet access mode",
select PPPoE, enter the broadband Internet account and password, click "OK" to save the
settings, Return to the "System Status> running", if PPPoE dial-up display "Connected",
said that it has successfully connected to the broadband network.

Edition: V2.0 Date:2012-1-11
3. Staic IP
Network operators to provide you with an Internet IP address, select Static IP, static IP
mode, the router's WAN port to use as an ETH port.
In the "Basic Settings> Internet access mode" select the Static IP mode, then enter your
ISP's IP address, subnet mask, default gateway, DNS and other related parameters can
be.

Edition: V2.0 Date:2012-1-11
4. Dynamic IP
Dynamic IP is widely used in hotels and restaurants and other public places, the Router
can connect via dynamic IP mode to hotels and other public access network resources,
the first, hotel of the network cable to the ETH interface to the router, then through the
following two methods to router switch to dynamic IP mode.
1) hard-switching: the switch router 3G/DHCP pull to the DHCP file.
2) Soft Switch: turn on the router interface, click on the "Basic Settings> Internet access
mode", select the dynamic IP, and then click "OK" to save the settings.

Edition: V2.0 Date:2012-1-11
Wireless Encryption
Selecting “Wireless Settings>Wireless Encription”, will enable you to configure wireless
security for your wireless network to protect your data from intruders. The Router
prodivers three types: WEP, WPA-PSK, WPA2-PSK. The security options are different
operation mode, it is recommended to use WPA-PSK security mode.

Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
zReorient or relocate the receiving antenna.
zIncrease the separation between the equipment and receiver.
zConnect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
zConsult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly approved by
Global Marine Networks, LLC may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized
modifications to this equipment. Such modifications could void the user’s authority to operate the
equipment.
IC Statement:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
This device should be installed and operated with a minimum distance of 20 cm between the
antenna and all persons.