05 06Assembly Guide
ZR9/ZR8/Z9 Bike www.reebokfitness.info/productsupport
RFE 4847 Z9 bike assembly guide v3.indd 5-6 18/03/2013 17:23
No. Description QTY No. Description QTY
A Console (incl. A-1) 1 G Flaywheel set (incl. G1~G-13) 1
A-1 Screw 4 G-1 Screw nut 3
B Handlebar set (incl. B-1~B-6) 1 G-2 Pattern nut 2
B-1 Foam grip 2 G-3 Flywheel axle 1
B-2 Screw 2 G-4 One-way bearing set 1
B-3 Semi-circuit washer 2 G-5 Small pulley 1
B-4 Handlebar end cap 2 G-6 Bearing 1
B-5 Hand pulse sensor 2 G-7 Bearing 1
B-6 Hand pulse wire 1 G-8 Bearing 1
C Handlebar post 1 G-9 Bearing 1
C-1 Screw 4 G-10 Flat washer 1
C-2 Semi-circuit washer 4 G-11 Washer 2
C-3 Seal 1 G-12 Sleeve 2
C-4 Handlebar post cover 1 G-13 Flat washer 1
C-5 Cable wire, upper 1 H Magnetic bracket with servomotor set 1
D Frame 1 I Axle set 1
D-1 Seat post adjusting knob 1 I-1 Screw 3
D-2 Screw 3 I-2 Drive pulley 1
D-3 Screw 6 I-3 Sleeve 1
D-4 Screw 1 J Belt tightener set (incl. J-1 - J-7) 1
D-5 Curved washer 1 J-1 Jockey wheel 1
D-6 Flat washer 4 J-2 Nylon nut 1
D-7 C-clip 1 J-3 Flat washer 1
D-8 Bearing 2 J-4 Screw 1
D-9 Crank, left 1 J-5 Curved washer 2
D-10 Crank, right 1 J-6 Screw 1
D-11 Sensor wire 1 J-7 Spring 1
D-12 Sensor fixed base (incl. D-4) 1 K Seat post 1
D-13 Drive belt 1 K-1 Saddle locking knob 1
D-14 Side cover, left 1 K-2 Screw fixed base 1
D-15 Side cover, right 1 K-3 End cap 2
D-16 Nylok screw 2 K-4 Saddle sliding set (incl. K-2, K-3) 1
D-17 Pedals (L+R) 1 K-5 Saddle 1
D-18 DC wire 1 K-6 Flat washer 1
D-19 Adaptor 1 L-1 Handlebar clamp 1
D-20 Cable wire, middle 1 L-2 Cap nut 4
D-21 Seat post sleeve 1 L-3 Carriage bolt 4
D-22 Rubber silicone 1L-3
E Front stablizer (incl.E-1~E-3) 1L-4
Flat washer 4
E-1 End cap with transport wheel, left 1L-5
Screw 1
E-2 End cap with transport wheel, right 1 L-6
Flat washer 2
E-3 Screw 2 L-7
Spring washer 2
F-1 Adjustable pad 2 L-8
Handlebar locking knob 1
F-2 End cap 2 L-9
Bushing 1
F-3 Screw 2 L-10
Handlebar cover 1
