Reebok PURE User manual

PURE BIKE USER MANUAL

Welcome from Reebok Fitness.
Thank you for choosing this Reebok Pure Exercise Bike.
Before you get started, please read the instructions. Should
you experience any difficulties, our support team will be happy
to help or check out our website at:
Important note:
Consult your doctor before starting any exercise program.
If you feel any sickness, chest pain, fts of dizziness or
breathlessness during your training, stop exercising and
consult your doctor immediately.
Model name: Reebok Pure Bike
Serial number:
These details can be found on the underside of your product.
www.reebokftness.info
If you have any further queries please
customer support team on the number or email address on
the back of this manual.
call or email our

CONTENTS
Pre-assembly Notes
Assembly Steps
Computer Operation
Exloded Diagram
Parts List
Warm Up
Limited Warranty
11
13
15
16
08
01
Precautions 06
Maintenance 10
Assembly Diagram
12

02 PRE-ASSEMBLY NOTES
Open The Box
Make sure to inventory all of the parts that are included in the box.
Check the Hardware Chart for a full count of the number of parts
included for proper assembly. If you are missing any parts,
please call our Technical Support line
Gather Your Tools
Before starting the assembly of your unit, gather the necessary tools.
Having all of the tools at hand will save time and make the assembly
quick and hassle-free.
Clear Your Work Area
Make sure that you have cleared away a large enough space to properly
assemble the unit. Make sure the space is free from anything that many
cause injury during assembly. After the unit is fully assembled, make
sure there is a comfortable amount of free area around the unit for
unobstructed operation.
Hardware Chart
For your convenience, we have identified the hardware used in the
assembly of this product. This chart is provided to help you identify
those items that may be unfamiliar to you. If you find any parts missing
please contact our Technical Support line 0 .
0800 440 2459
800 440 2459
19.Arc Washer Φ8.5*Φ22*T1.5
20.Allen Hard Bolt M8*15
23.ScrewΦ4*20
29.L Shape Knob
14.Allen Head Bolt M10*20
Spanner L15
Box Wrench
Allen key L6
4
4
4
2
1
1
1
1
Ø22*Ø8.5-4PCS
M10*20-4PCS
M8*15-4PCS
Ø4*20-2PCS
1 PC
TOOL:
L6-1pc,L13*17-1pc,L15-1pc

03
Step 1:
1-1: Attach Rear Stabilizer (3) to Main frame (1), fasten with Allen
Head Bolts (14), tighten with Allen Key.
1-2: Attach Front Stabilizer (2) to Main frame (1), fasten with Allen
Head Bolts (14), tighten with Allen Key.
ASSEMBLY STEPS
Step 2:
2-1:
2-2: Connect Middle Computer Wire (17) with Lower Computer Wire
(18).
2-3: Connect the Upper Tension Wire (15) with Lower Tension Wire
(16).
2-4: Insert Front Post (4) into Main frame (1), fasten with Allen Head
Bolt (20) and Arch Washers (19) tighen with Allen Key.
2-5: Connect the computer Wire(21) with the Middle computer wire(17).
Slide Front Post Cover (11) onto Front Post (4).( Lift it to the
position as the picture shown.)
Place the Front Post Cover (11) onto Main Frame (1).
Install Computer (6) onto Front Post (4) fasten by Screws (22) tightly
as shown.

04
Step 3:
3-1: Secured Handlebar (5) onto Front Post (4), with Bracket (26),
fasten with Allen Head Bolt (27).
3-3: Plug the pulse sensor wire(25) to the back hold of the computer(6)
as shown below.
3-2:
with L shape Knob (29).Now fix Rear Bracket Cover (24) on the other side
and fasten with Screws(23).
Fix Front Bracket Cover (28) onto Handlebar (5), fasten to Handlebar (5)
Step 4:
4-1: Attach Seat (8) to Seat Post (7), fasten with Flat Washer (30),
Spring Washer (31), Nylon Nut (32).
4-2: the Quick Release Knob (10) from the Main Frame(1).
Place the Seat Post Cover (9) onto the Main Frame (1) as the
picture shown.
4-3: Insert Seat Post (7)into Main Frame(1), then line up the hole
and secure the seat in position with Quick Release Knob (10).
Remove

05
Step 5:
5- :
the side of the pedal strap with more slots should go on outside of pedal
to allow ease of adjustment at a later date
5-2: Attach the Right Pedal (13) onto the right pedal shaft and tighten
with open end spanner.
The right pedal is marked with R and should be threaded onto the crank (33)
in a CLOCKWISE direction.
5-3: Attach the Left Pedal (12) onto the left pedal shaft and tighten with
open end spanner.
The left pedal is marked with L and should be threaded onto the crank (33)
in a COUNTERCLOCKWISE direction.
1 Slot the Pedal Strap on the pedals as marked L and R for left and Right.

06
PRECAUTIONS
This product has been designed for in-home use. These instructions are
intended to provide important information for use and maintenance of the
equipment as well as for your personal safety. Keep this user manual safe for
future reference.
WARNING!
This product is made for home use only and tested up to a maximum body
weight of 120 kilograms.
RFE UK Ltd. assumes no responsibility for personal injury or
property damage sustained by or through the use of this equipment. It is
the responsibility of the owner to ensure that all users of this equipment are
adequately informed of all warnings and precautions.
SCOPE
•Maximum user weight of 120kg.
•This product is designed for physical exercise by adults. This product is not
suitable for use by persons under 14 years of age.
•Never allow more than one person on the equipment at a time.
ENVIRONMENT
•Ensure that those present are aware of possible hazards e.g. moveable
parts during training.
•Ensure that suffcient space is available to use the exercise bike.
•Please ensure that liquids or perspiration never enter the machine or
electronics.
•This product is designed to be used and stored indoors. Do not store the
product outside, or in damp/ dusty environments.
•The product is made for home use only. Warranty and manufacturer’s
liability do not extend to any product or damage to the product caused by
commercial use.

07
USER HEALTH
•Consult your doctor before starting any exercise programs to receive advice
on training.
•Incorrect/excessive training can cause health problems or injuries .
•If you feel sickness, chest pain, fts of dizziness or breathlessness during
your training, immediately stop the training and consult your doctor.
PRODUCT PREPARATION
•Ensure the bike is on a flat, level surface with at least 0.5m of clear area
surrounding the exercise bike.
•Ensure that training only starts after correct assembly, adjustment and
inspection of the product.
•Follow the steps of the assembly instructions carefully .
•Only use suitable tools for assembly and ask for assistance if necessary.
•Only use original Reebok parts as delivered).
SAFETY CHECKS BEFORE EVERY USE
•Tighten all adjustable parts to prevent sudden movement while training.
•Tighten all nuts and bolts.
•Check that the saddle is secure.
•Check that the pedals are secure.
•Check that the tension knob is secure.
•Check that the handlebars are secure.
•Press start to ensure there is power to the console.
•Do not use the product without shoes or with loose shoes.
•Be aware of non-fxed or moving parts whilst mounting or dismounting
the product.
•Do not wear loose or poorly ftting clothing that may become trapped in
the product.

08
COMPUTER INSTRUCTION
POWER ON
1. To power on, please insert the 2 AA battery into the battery compartment on the
rear of cover and power on.
POWER ON DISPLAY
TEMPERATURE : ℃(0~60℃)；℉(32~99℉)。
CALENDAR : 1900/1/1~2006/1/1~2099/12/31。
CLOCK : 24 HOURS / 0:00~23:59
FUNCTION
SCAN: scans through the following every 6 seconds,
SCAN / SPEED / RPM / TIME / DISTANCE / CALORIES / PULSE / SCAN.
RPM : 0~15~999
SPEED : 0.0~99.9 KM
TIME : ount up and down are available.
DISTANCE : Count up and down are available.
CALORIES : Count up and down are available.
PULSE : 30~240 BPM.
OPERATION
After inserting the batteries the console will sound a beep for 2 seconds,
your PURE bike console is fitted with an automatic standby feature,
to turn on simply pedal.
OPERATION METHOD
You can set the time and calendar or by pressing mode set the following
0:00~99:00. C
0.00~99.50 K,
0~9990,
functions :TIME/DIST./CAL/PULSE ,the function selected can be set when it’s
flashing,set by using the +/- keys, press mode key to confirm and select
another function if required.